Why does it need to be pushed out? for 5 computers? You said it needs to be connected to wifi based on device not user.. So just connect it manually. and if you need something to control it 802.1x is how. Pushing out wifi settings via GPO is not a method of controlling which devices have access anyway, that's just making it easier so techs don't have to help users connect.

@DustinB3403 said in How would I determine the dew point of a server room:

@MattSpeller said in How would I determine the dew point of a server room:

@DustinB3403 said in How would I determine the dew point of a server room:

@MattSpeller So not working in weather often, can you explain the site to me a bit. I understand the sliders, but this just doesn't make any sense to me.

So, you know two data points (or can look them up)

Temperature of server room

Humidity of server room (usually the same as outdoors but can vary widely - use worst case)

plug those into the website, it'll solve for dew point and cough you out a number.

As SAM is no doubt typing out already it's not a super useful thing to know but it can be CRITICAL in places like the everglades where you get super high humidity.

For a real life scenario it's most useful to consider it if your gear is ever powered off for a while (week?)

So dewpoint alerts are probably pretty worthless for us, you're thinking?

Suffice to say you'd be having other things to worry about before DP became an issue.

Like getting power back to your building 😛

@BRRABill said in How to Reset your Wordpress Admin Password:

@IRJ said in How to Reset your Wordpress Admin Password:

@scottalanmiller How do you put your scripts on here. I was looking for a toggle in the toolbar for it. Is there some code that you use?

use the ` character 3 times

you mean this? you mean this?

cool beans

@wirestyle22 said in FreePBX Remote Extension Problems:

@scottalanmiller said in FreePBX Remote Extension Problems:

@wirestyle22 said in FreePBX Remote Extension Problems:

@RamblingBiped Hope this is the solution. I unfortunately have Cisco CM and its my first time managing VoIP

So sorry.

Complication for the sake of complication

And spending money for the sake of throwing away profits 😉

@thwr said in DIY Environment Monitoring:

@gjacobse said in DIY Environment Monitoring:

@thwr said in DIY Environment Monitoring:

@gjacobse said in DIY Environment Monitoring:

@travisdh1 @thwr

I'd like to run window/door with temp motion and glass in each room.

But - Sometimes I don't get what I want...

So human body tracking / detection or do I get you wrong?

LOL - nothing that serious. Temp is for just how the house is heated / cooled. Motion and glass for entry detetction, as a option to the windows.

Ah ok 😛

There are (ultra)sonic based sensors avaliable. They are able to detect a breaking window. For many sensors, mh, why not go for a meshed solution? Like a few cheap Arduino Nano ($1-1.5 via Ali) and maybe Bluetooth LE or Zigbee for reporting to a central instance.

Yup - that would do it. Hardware isn't so much the issue.... save the need to be as small as possible so it didn't stand out and a huge item hung on the wall. It's the programming... I'm clueless on programming.

What I've done in situations like this is build my own proxy somewhere to handle getting out and then into wherever I need to go from there.

Haven't played with it here, yet. I've played with Server 2016 just a little, but not SSD. Windows Software RAID still scares me, I'm waiting at least one more generation to see if they can make it without terrible disasters before thinking its seriously ready to be trialed.

@DustinB3403 said in Environment Monitoring:

Watchdog units aren't bad, they can be pricey though.

Basic DIY is
a) $60 + time (depends on the case (IP level), sensors and actors)
b) a lot to learn
c) customizable like nothing else

The XX concurent users only comes into play if the licensed application offers such a thing. In the case of something like Office 2013, you'd definitely need 300 license...

But for Something like... Raiser's Edge, or a Student Information System... You'd only need to license for the expected number of concurrent users.

IE: Raiser's Edge can be installed on every computer on my campus... But only 15 of us can log in at one time.

@travisdh1 said in Having Trouble Connecting to NTG Lab with X2GO:

@scottalanmiller said in Having Trouble Connecting to NTG Lab with X2GO:

I used to use XFCE a lot, but the interface is just too lean for me. LXDE for me now when I need something lean and Cinnamon when I want a full desktop replacement. I find KDE just enough confusing and too "heavy" to learn to bother.

Yeah, KDE isn't my favorite, but everyone here was able to use it without having to retrain them, so it's what we went with. I was very glad I stuck to the "universal" desktop environments when making recommendations tho, makes life so much easier.

I hate that the Super (Windows) key is only a modifier. It's much easier and more familiar to hit that key and have the activities overview come up than alt+space or alt+f2 (whatever it actually is) for krunner.

Docker container is running. NextCloud is installed, but I need to get the correct selinux setting for the apps folder, and create the reverse proxy for NextCloud to access the collabora container with. Hopefully finish up in the next couple of evenings.

Duh...

sudo journalctl --since="2016-07-26 23:00:00" -u xo-server -n 500 > xo-server.txt

Thanks to those of you that offered a suggestion. I built a second RDS server and applied my group policy and browsing was fine. I then started to think about what I needed to do to move it in to production and replace the one that had the browsing issue. Then it hit me.... I have load balancing on my SonicWall. RDS is mapped through the firewall on https. Therefore requests that went out over https could go out over either interface, but always came back on one. This is why it would sometimes work. This is also why most other sites would work, but https (in this case Office 365 which always goes over https) would only work once in a while. Adding a route to force all traffic from the RDS server out over the interface that traffic will come in on fixed the problem.

Great. Glad that it is fixed.

Season 2 was the best, IMO.

It's pretty hit or miss, but has some of the funniest scenes I've seen in a long time here and there.

This past season (Season 3) had probably the craziest thing I have ever seen on TV.

@Lakshmana said in Problem Installing Zero Tier in windows 10:

@scottalanmiller I will try to have the virtual machine and try from that too

If that is behind the firewall, it will have the same problem.

@wirestyle22 said in Any OpenSource Print Monitoring Solutions:

@scottalanmiller This is a company that couldn't locate a record of purchasing our VM host machine.

Maybe print monitoring is a bit over the top for them then 🙂

@fuznutz04 that's a good question, I'm not sure. I know that there is one for desktops.