@dave247 said in Disaster Recovery as a service companies that support IBM iSeries / AS400 systems?:

@scottalanmiller said in Disaster Recovery as a service companies that support IBM iSeries / AS400 systems?:

@dave247 said in Disaster Recovery as a service companies that support IBM iSeries / AS400 systems?:

@scottalanmiller said in Disaster Recovery as a service companies that support IBM iSeries / AS400 systems?:

Some important things to keep in perspective...

The average CEO is incompetent. The average business loses money and will go out of business. The average business that survives doesn't do well. The average IT person is incompetent. The average of any position, in any field, is incompetent.

Averages are quirky things. The average is crap. So that "most" companies and IT people are like this, shouldn't really make us upset or worried. No one worried about this stuff is average or looking to be average.

LMAO. So I am actually correct in constantly thinking that I am incompetent at my job and should technically be fired.

LOL. Assuming you are AVERAGE then you are incompetent and should NOT be fired because incompetence is all that is normally expected 😉

But like I have said elsewhere, if you are taking time to post on a professional forum, that already puts you above average. And as I said here, if you are worried about being average, that puts you above average.

None of us are average. That can make this harder, because we start to feel like the average is pretty good. But it's the average of a highly self-selected group. It's like trying to determine who well the average person would do in hand to hand combat by evaluating the results of Roman arena gladiator fights. The average gladiator is nothing like the average person, they've already self filtered heavily.

Well thanks. I do trey very very hard to make the wises choices with everything for work. I mean, I worked a decade in retail and hated it, and now I have an IT job where I'm in charge of an entire environment... it's a very massive learning opportunity and I've learned and done so much.. but yeah, there's a lot of times where I feel like I'm not qualified, at least until I learn and do the thing and succeed at it.

That's a different effect. IT is a HUGE field. No individual should ever feel like they have enough knowledge to do the job at any significant level. It's just not realistic. That's why, no matter how small a company is, they need a team of experts. IT is just too big. Most only need to work a few hours a year, but they are all needed. The best CIOs still hire consultants or in larger companies internal IT experts, for nearly every functional area.

@momurda said in How long to keep people's AD/Exchange accounts:

Yes i have a process i want to follow too but cant.
3 years after people have not worked here, they still have an email and i think it is stupid AF.

and where is that email going? Who's looking at the old message, responding to the new?

Haven't done this since 2005 and we did "from scratch" back then.

@brrabill said in Printing Costs:

@jaredbusch said in Printing Costs:

@brrabill said in Printing Costs:

HP is new to the copier market since 2016. They entered after buying the Samsung line.

I have a client that has had an HP copier for years.
HP Color LaserJet CM6040 MFP Series

Annnnnnd?

Do they like ittttttttt?

They do.

@table said in Duplicating IVR entries in FreePBX 13:

@jaredbusch

Is there a better way to do this with whats included in freepbx or commercial modules? I was thinking just putting the script in cron and just have it run every so many hours. Then eventually making a form to add or modify the data.

What I would do is update your ivr3 to include the id and name from ivr_details and think of those as the unique key. Or add them to a separate cross reference table, however you want to handle it.

Then add logic to your system to fail and notify if there is a mismatch (aka someone changed it in FreePBX).

There is no way to do this in FreePBX itself.

Once you change the database, you will have to reload everything.

You can issue the fwconsole reload command from your script. That is the same as clicking the red "Apply Config" button.

@dbeato said in Anyone running SonicOS 6.5.0.2-8n?:

@dave247 said in Anyone running SonicOS 6.5.0.2-8n?:

We run a SonicWall NSA 3600 where I work and I am staring to look into upgrading to the new 6.5 firmware (6.5.0.2-8n). I have heard of some issues with the last two updates, and wanted to get more input if anyone has any to give..

I am not, I am using the 6.2.9 on the production Sonicwalls we have. I would recommend to test it out if possible.

Unfortunately I can't realistically test it out. Even if I had an extra, non-production unit, I doubt I could effectively detect issues since production factors would not be present enough to fully test. I suppose I could just always roll back if necessary... but I think I will probably be waiting a few more releases.. that or just move to a different UTM all together..

@vhinzsanchez Containers are lighter and faster. And they are a type of virtual machine, Type-C virtualization. So things like performance and density alone are reasons that containers are popular.

@tim_g bump

@momurda said in Volume License Center:

@coliver Nope, not for over a year. Also havent logged in since last year either though.

Agreements expire, but I've never lost access. I've not seen new until I add them sometimes though.

I don't see IE going anywhere. We have all the same need for IE in the future that we have n the past. Sure now it is DevOps rather than Snowflake, we are using more tooling, but things are also more complex and bigger.

@wls-itguy said in VMWare vSphere 6.5 loses licensing:

@bbigford said in VMWare vSphere 6.5 loses licensing:

@wls-itguy said in VMWare vSphere 6.5 loses licensing:

@bbigford said in VMWare vSphere 6.5 loses licensing:

@wls-itguy said in VMWare vSphere 6.5 loses licensing:

Anyone else have this happen recently? I got Veeam backup failure notifications last night and this morning saying that the servers being backed up were disconnected. I connected to vCenter and Sho'Nuff two of my hosts were disconnected. When I tried to reconnect it said I didn't have licensing. It took a bit but I finally got them reconnected and relicensed.

Haven't provided enough information, but here's why ours get relicensed often...

If you're a VMware partner, you get access to their Enterprise Plus licensing. That's very expensive licensing that they just hand over. But it also means that we have to go through quarterly and reapply licensing; VMware sends it to us, and we replace it.

Can you provide some more information about your licensing level, etc?

Essentials Plus.

Does the license actually disappear, or does it just show that it is not applied to any hosts but the license is still in the console?

Not applied to any hosts. But when I finally got into it I couldn’t assign them. It was like they were stuck. Had to reboot the center appliance and then I could assign and then I could reconnect.

Sounds like your VCSA is jacked up (you're using VCSA, right? Not vCenter on Windows...)

I've had plenty of issues with VCSA 6.0, but none really with VCSA 6.5... In either case, just rebuild the appliance to see if that is the issue. Takes like 15 minutes.

@JaredBusch I had no idea those adapters existed. I'll have to keep that in mind if I run in to a run where I can't pull the coax out while pulling a piece of Cat 6 behind it. Thanks for the link.

In this project most of the runs aren't too bad and they want to move the NVR anyways. If it's all IP based, that's no problem - the NVR only needs one network drop.

I started this thread because I was interested in going. I was going to combine it with visiting my brother and sister-in-law. Aaaannnddd, I can't go.
Enjoy. I hear MIller Park is quite nice.

@scottalanmiller how did you resist the urge to ask why backups are needed.

😉

@emad-r

NVM the same thing still works, but cause the files changed I thought I need to put something else.

@emad-r said in Unable to delete KVM snapshot:

@stacksofplates said in Unable to delete KVM snapshot:

Uh there’s no difference. If you freeze the system it can’t be used. This is to run on live systems so they remain running the whole time.

What no coffee break for servers !!!

They definitely get a break if you pour coffee on them.

I'm going to start using it on Windows if my Webroot issues keep up!

(NOTE: these issues are not Webroot's fault, I don't think.)

Thanks for your suggestions. Taking the results to my client.

@momurda said in Webroot Freezing Windows 10:

@brrabill said in Webroot Freezing Windows 10:

KB4093112

This problem isnt listed in the Known Issues section of the update yet.
https://support.microsoft.com/en-us/help/4093112/windows-10-update-kb4093112
This seems to be the new spectre v2 update. Seems to have totally borked IE though for many people.

Was the other Webroot issue listed?

Hello Guys

Thanks for the advice.

It is working now

0_1524015956668_Screenshot_1.png

What I did was change the information inside "/etc/zabbix/zabbix_server.cnf" as follows:

DBHost=35.200.156.83 (The PGSQL IP)
DBUser=zabbix
DBName=zabbix
DBPassword=password
DBPort=5432

And change localhost in the installation page to the pgsql IP as well and it works.

Thanks Guys