Catastrophic network gear failure yesterday
-
@momurda said in Catastrophic network gear failure yesterday:
Am I missing something here? I can get 3 of
Ubiquiti Networks 48-Port UniFi Switch, Managed PoE+ Gigabit Switch with SFP, 500W (US-48-500W
for the same price as one HP Dell or Cisco switch with similar features.Yes, definitely.
-
@momurda said in Catastrophic network gear failure yesterday:
Do i have to buy subscription service or install a vm to manage these?
You'll need to install management software for Unifi (Unifi itself needs to be installed), but that doesn't need to be a VM, but should be. There is definitely no subscription here.
-
Look at the non-Unifi switches, too. They are cheaper and more powerful.
-
@scottalanmiller said in Catastrophic network gear failure yesterday:
Look at the non-Unifi switches, too. They are cheaper and more powerful.
You mean the EdgeSwitches and EdgeMax, correct?
-
Check out these...
-
@dustinb3403 said in Catastrophic network gear failure yesterday:
@scottalanmiller said in Catastrophic network gear failure yesterday:
Look at the non-Unifi switches, too. They are cheaper and more powerful.
You mean the EdgeSwitches and EdgeMax, correct?
Correct.
-
@momurda said in Catastrophic network gear failure yesterday:
Do i have to buy subscription service or install a vm to manage these?
Don't purchase Unifi switches. Go with the EdgeSwitch.
-
What controller is used for the EdgeSwitch line? Obviously not the Unifi Controller as it's a different line of equipment.
-
@dustinb3403 said in Catastrophic network gear failure yesterday:
What controller is used for the EdgeSwitch line? (obviously not the Unifi Controller) as it's a different line of equipment.
Nothing yet. I believe that the UNMS will eventually (if it doesn't already) support the Edge line.
-
@coliver said in Catastrophic network gear failure yesterday:
@dustinb3403 said in Catastrophic network gear failure yesterday:
What controller is used for the EdgeSwitch line? (obviously not the Unifi Controller) as it's a different line of equipment.
Nothing yet. I believe that the UNMS will eventually (if it doesn't already) support the Edge line.
So how are people managing the Edge line of equipment currently?
-
@dustinb3403 said in Catastrophic network gear failure yesterday:
@coliver said in Catastrophic network gear failure yesterday:
@dustinb3403 said in Catastrophic network gear failure yesterday:
What controller is used for the EdgeSwitch line? (obviously not the Unifi Controller) as it's a different line of equipment.
Nothing yet. I believe that the UNMS will eventually (if it doesn't already) support the Edge line.
So how are people managing the Edge line of equipment currently?
Either by command line or via the built in web gui.
-
@coliver said in Catastrophic network gear failure yesterday:
@dustinb3403 said in Catastrophic network gear failure yesterday:
@coliver said in Catastrophic network gear failure yesterday:
@dustinb3403 said in Catastrophic network gear failure yesterday:
What controller is used for the EdgeSwitch line? (obviously not the Unifi Controller) as it's a different line of equipment.
Nothing yet. I believe that the UNMS will eventually (if it doesn't already) support the Edge line.
So how are people managing the Edge line of equipment currently?
Either by command line or via the built in web gui.
That is what I thought (web gui), but wanted to make sure. I didn't think of the CLI, but of course it's there.
-
@dustinb3403 said in Catastrophic network gear failure yesterday:
I didn't think of the CLI, but of course it's there.
And of course would probably be comparable to how they are currently managing their Cisco equipment.
-
@dustinb3403 said in Catastrophic network gear failure yesterday:
What controller is used for the EdgeSwitch line? Obviously not the Unifi Controller as it's a different line of equipment.
No controller needed, it's not a Unifi. The need for a controller is the Unifi / Meraki concept.
-
@dustinb3403 said in Catastrophic network gear failure yesterday:
@coliver said in Catastrophic network gear failure yesterday:
@dustinb3403 said in Catastrophic network gear failure yesterday:
@coliver said in Catastrophic network gear failure yesterday:
@dustinb3403 said in Catastrophic network gear failure yesterday:
What controller is used for the EdgeSwitch line? (obviously not the Unifi Controller) as it's a different line of equipment.
Nothing yet. I believe that the UNMS will eventually (if it doesn't already) support the Edge line.
So how are people managing the Edge line of equipment currently?
Either by command line or via the built in web gui.
That is what I thought (web gui), but wanted to make sure. I didn't think of the CLI, but of course it's there.
They are standard managed switches. So SNMP as well.
-
My friend uses the Unifi switches. He has them to power the Unifi APs and the Unifi Cameras.
-
@penguinwrangler said in Catastrophic network gear failure yesterday:
My friend uses the Unifi switches. He has them to power the Unifi APs and the Unifi Cameras.
Generally the unifi switches are for tiny deployments. How is he liking them?
-
So the
ES-48-LITE
would be great i think
No need for PoE, though i might order one of them with it.
Now if i could find someone with them in stock so i can get them here by Friday. -
@momurda said in Catastrophic network gear failure yesterday:
So the
ES-48-LITE
would be great i think
No need for PoE, though i might order one of them with it.
Now if i could find someone with them in stock so i can get them here by Friday.Amazon usually has these.
-
@momurda said in Catastrophic network gear failure yesterday:
So the
ES-48-LITE
would be great i think
No need for PoE, though i might order one of them with it.
Now if i could find someone with them in stock so i can get them here by Friday.https://www.streakwave.com has stock
