Somethings You Need To Know About Hyper-V
-
@WingCreative said:
it sounds like you need a full version of Server 2012 running to have easy configuration through a GUI.
Really? I wouldn't know as I'm an ESXi guy. But I didn't think server core meant no GUI, I thought it meant you use client GUIs. I still manage my core servers with the same GUI's I've always done, I just run them on my PC. Which would be the same as ESXi, where I manage everything via vSphere Client running on my PC (other than installing the hypervisor itself) - there is no server GUI.
-
@WingCreative said:
The main thing keeping me from going into the deep end with it right now is that, based on my current understanding, it sounds like you need a full version of Server 2012 running to have easy configuration through a GUI. I guess it wouldn't be the worst thing in the world to learn how to manage it from Server Core's CLI, but right now I'm happily doing what I need to with XenCenter so it's hard to justify the switch.
Is that an accurate representation of the state of Hyper-V management or is that another myth?
Complete Myth my friend, yes i admit getting the tools set-up on both a windows machine and get the settings right on the HyperV server can be a pain the first few times you do it (well it was for me). Once you got the hang of it deployment becomes easier. You also have free tools like 5nine manager to help.
I'm considering more too HyperV now for new hardware.
-
@WingCreative said:
The more I look at virtualization options, the more I'm drawn to Hyper-V. It seems to have a nice niche where it's free like XenServer but with more support for some really handy things like Veeam and Starwind vSAN.
The main thing keeping me from going into the deep end with it right now is that, based on my current understanding, it sounds like you need a full version of Server 2012 running to have easy configuration through a GUI. I guess it wouldn't be the worst thing in the world to learn how to manage it from Server Core's CLI, but right now I'm happily doing what I need to with XenCenter so it's hard to justify the switch.
Is that an accurate representation of the state of Hyper-V management or is that another myth?
That's mostly true. The GUI bit is only true if you want the included GUI from MS. There are third parties that make free ones too (disclaimer: that I have not tested personally.)
-
These days, if I am making client recommendations for a new platform (e.g. not updating what they already have installed) we've moved from VMware being the go to answer to it being the last of the list (although KVM never bubbles up either, but would outrank VMware these days) with HyperV and XenServer being the only two that actually end up getting recommended when deploying a hypervisor.
When deploying appliances (a la Scale) then we don't care what the hypervisor is because we only care how the appliance behaves and is supported, not "how the sausage is made." So KVM ends up getting recommended through that path, but never on its own.
-
@scottalanmiller What is the ratio of XenServer to Hyper-V that you guys are seeing your clients adopt?
-
We always give the clients their options when helping them make decisions: that being said the last 10 migrations we have done here is the breakdown:
Hyper-V : 8
Xenserver-1
The other I can't find. -
@hobbit666 said:
Complete Myth my friend, yes i admit getting the tools set-up on both a windows machine and get the settings right on the HyperV server can be a pain the first few times you do it (well it was for me). Once you got the hang of it deployment becomes easier. You also have free tools like 5nine manager to help.
To expand on this, as long as you join the Hyper-V server to the domain then there is almost no extra configuration needed on the Hyper-V host as that is how it is designed to work. Then you just add the Hyper-V tools on any other Windows 8.1 or Server 2012 machine and manage everything from there.
-
@JaredBusch said:
@hobbit666 said:
Complete Myth my friend, yes i admit getting the tools set-up on both a windows machine and get the settings right on the HyperV server can be a pain the first few times you do it (well it was for me). Once you got the hang of it deployment becomes easier. You also have free tools like 5nine manager to help.
To expand on this, as long as you join the Hyper-V server to the domain then there is almost no extra configuration needed on the Hyper-V host as that is how it is designed to work. Then you just add the Hyper-V tools on any other Windows 8.1 or Server 2012 machine and manage everything from there.
How does that work in a one server situation? you need to reboot the host and....?
-
@Dashrender said:
How does that work in a one server situation? you need to reboot the host and....?
The same as a one server setup with any other Hypervisor? You declare a maintenance window and shut down the guests and reboot.
What are you actually getting at?
-
@dafyre said:
@scottalanmiller What is the ratio of XenServer to Hyper-V that you guys are seeing your clients adopt?
HyperV wins by far. XS is more niche, but still very viable and the only real competitor to HyperV at this point in the SMB. Because both have the full stack for free, and both are quite mature (Xen being extremely mature and HyperV finally getting there) there is little means for another vendor to wiggle into the space.
-
@JaredBusch said:
@Dashrender said:
How does that work in a one server situation? you need to reboot the host and....?
The same as a one server setup with any other Hypervisor? You declare a maintenance window and shut down the guests and reboot.
What are you actually getting at?
Can you log into the Hyper-V hypervisor while the VM that is the DC is down?
-
@Dashrender said:
Can you log into the Hyper-V hypervisor while the VM that is the DC is down?
Can you log in to your workstation when the DC is down?
The answer is of course you can. Windows caches credentials. Always has.
Even if you somehow have been down so long that cached credentials no longer work, it is just like any other windows system ever made. Log in with the local account.
All of that said though, if you properly configured your Hyper-V server to launch the various guests at power on, then this will not be an issue anyway.
-
@Dashrender said:
Can you log into the Hyper-V hypervisor while the VM that is the DC is down?
I should add this to the list of myths. I forgot how often people feel that HyperV either is required to be on a domain or that being on a domain makes it super fragile. You can do HyperV standalone if you want or, as @JaredBusch points out, lacking AD does not stop you from logging into a machine.
-
@scottalanmiller said:
@Dashrender said:
Can you log into the Hyper-V hypervisor while the VM that is the DC is down?
I should add this to the list of myths. I forgot how often people feel that HyperV either is required to be on a domain or that being on a domain makes it super fragile. You can do HyperV standalone if you want or, as @JaredBusch points out, lacking AD does not stop you from logging into a machine.
Hyper-V is DESIGNED to be on a domain. So that is the best way to manage it. But as with anything else Windows, a domain is not required.
-
@JaredBusch said:
Hyper-V is DESIGNED to be on a domain. So that is the best way to manage it. But as with anything else Windows, a domain is not required.
Sure, not disagreeing there. It's generally the best way to go. But if you are on a workground or have no AD or whatever, those aren't barriers to HyperV.
-
It sounds like it might be feasible to run a free Hyper-V host without any sort of Windows VM involved... As I am a fan of irony, I may just have to try it and see what I can do with ManageEngine's Hyper-V configuration tool (the best free option Google has found for me so far).
-
@WingCreative said:
It sounds like it might be feasible to run a free Hyper-V host without any sort of Windows VM involved... As I am a fan of irony, I may just have to try it and see what I can do with ManageEngine's Hyper-V configuration tool (the best free option Google has found for me so far).
Absolutely. There is no Windows dependency in HyperV whatsoever. You can use HyperV for a Linux only system top to bottom.
-
And there are even businesses cases where that would make sense. Not a ton, but they exist.
-
@scottalanmiller Fate is not without a sense of irony.
-
@WingCreative said:
It sounds like it might be feasible to run a free Hyper-V host without any sort of Windows VM involved... As I am a fan of irony, I may just have to try it and see what I can do with ManageEngine's Hyper-V configuration tool (the best free option Google has found for me so far).
It would be an odd & rare choice though, if you're only going to use linux. You'd likely get better preformance out of other hypervisors and better management.
