What Are You Doing Right Now
-
@EddieJennings said in What Are You Doing Right Now:
@IRJ said in What Are You Doing Right Now:
@EddieJennings said in What Are You Doing Right Now:
@IRJ said in What Are You Doing Right Now:
@EddieJennings said in What Are You Doing Right Now:
On hold with RedHat to once again reschedule RHCSA exam.
:angry_face_with_horns:
Initial reschedule was done by RedHat themselves because of t3h Covid, but now the date falls into my on-call week (since that schedule shifted as of last week).
:crying_face:
The test will be taken. Just a matter of when
Oh I know. I was just crying because its inconvenient to reschedule these things and you had to go through it twice.
-
Long hold time, but lady with whom I worked was pleasant and polite :). Rescheduled for 7/24
-
@JaredBusch said in What Are You Doing Right Now:
Depending on what you actually mean by core would change up the recommendations for specific units. But they have the entire spectrum covered.
Just the "main" switch that everyone default gateway points to, the switch then does static routes to our other networks depending on connection, e.g. MPLS, ADSL, Misc Router.
So just a good switch with L3 lite features and 2-4 10G ports, also VLAN routing. -
@hobbit666 said in What Are You Doing Right Now:
@JaredBusch said in What Are You Doing Right Now:
Depending on what you actually mean by core would change up the recommendations for specific units. But they have the entire spectrum covered.
Just the "main" switch that everyone default gateway points to, the switch then does static routes to our other networks depending on connection, e.g. MPLS, ADSL, Misc Router.
So just a good switch with L3 lite features and 2-4 10G ports, also VLAN routing.Unifi EdgeSwitches should do you just fine.
-
Fighting Windows Xp ( i know , I know. Nothing I can do ... ) on a read only issue. No idea why the folder is stuck in Read only- I also know that is generally ignored by XP on Folders, But This Terminal (being an all in one) wont start up correctly.
Legacy equipment gives me a headache. -
@WrCombs said in What Are You Doing Right Now:
Fighting Windows Xp ( i know , I know. Nothing I can do ... ) on a read only issue. No idea why the folder is stuck in Read only- I also know that is generally ignored by XP on Folders, But This Terminal (being an all in one) wont start up correctly.
Legacy equipment gives me a headache.Have you ever tried the attrib command from the cmd prompt? Open a cmd windows in administrator mode and type in help attrib. It may help you past issues that you can't correct from the file explorer. Something like attrib <file name> -r to remove the read only attribute. Don't use my example. I don't remember the syntax off the top of my head. Google it for more.
-
@Dashrender said in What Are You Doing Right Now:
@hobbit666 said in What Are You Doing Right Now:
@JaredBusch said in What Are You Doing Right Now:
Depending on what you actually mean by core would change up the recommendations for specific units. But they have the entire spectrum covered.
Just the "main" switch that everyone default gateway points to, the switch then does static routes to our other networks depending on connection, e.g. MPLS, ADSL, Misc Router.
So just a good switch with L3 lite features and 2-4 10G ports, also VLAN routing.Unifi EdgeSwitches should do you just fine.
There is no such device.
UniFi Switch or EdgeSwitch
Not Unifi EdgeSwitch
-
@hobbit666 said in What Are You Doing Right Now:
@JaredBusch said in What Are You Doing Right Now:
Depending on what you actually mean by core would change up the recommendations for specific units. But they have the entire spectrum covered.
Just the "main" switch that everyone default gateway points to, the switch then does static routes to our other networks depending on connection, e.g. MPLS, ADSL, Misc Router.
So just a good switch with L3 lite features and 2-4 10G ports, also VLAN routing.What throughput do you need on the Switching fabric? Juniper has serval offerings that could meet your needs but it depends on throughput. Ex4300 line would make a good core switch stack (and has 40GB links for Virtual Chasis).
-
@JaredBusch said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@hobbit666 said in What Are You Doing Right Now:
@JaredBusch said in What Are You Doing Right Now:
Depending on what you actually mean by core would change up the recommendations for specific units. But they have the entire spectrum covered.
Just the "main" switch that everyone default gateway points to, the switch then does static routes to our other networks depending on connection, e.g. MPLS, ADSL, Misc Router.
So just a good switch with L3 lite features and 2-4 10G ports, also VLAN routing.Unifi EdgeSwitches should do you just fine.
There is no such device.
UniFi Switch or EdgeSwitch
Not Unifi EdgeSwitch
my bad ubiquiti EdgeSwitch is what I meant.
-
Deploying NextCloud 19.0.0 now.
-
@scottalanmiller said in What Are You Doing Right Now:
Deploying NextCloud 19.0.0 now.
Every release looks better and better. How easy is the collobora integration to get setup now?
-
GOG Free Games Collection
https://www.gog.com/partner/stay_at_home -
weird stuff going on right now.
ran a register command on a site, the service doesn't show up , but the application opens (for whatever reason if the service isn't there / working it wont work. Aloha - im sure)
and I can do things within the application.. -
@travisdh1 said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
Deploying NextCloud 19.0.0 now.
Every release looks better and better. How easy is the collobora integration to get setup now?
Most people use OnlyOffice anymore cause of the better support for microsoft office formats. It installs itself now no need for separate configuration or docker containers. I think collobora is still about the same as before.
-
@thecreaitvone91 said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
Deploying NextCloud 19.0.0 now.
Every release looks better and better. How easy is the collobora integration to get setup now?
Most people use OnlyOffice anymore cause of the better support for microsoft office formats. It installs itself now no need for separate configuration or docker containers. I think collobora is still about the same as before.
I tried the OnlyOffice option and it didn't work for me.
-
running up a mesh central machine in a controlled environment. i'm half allowed to, half not allowed to, I'll see how we go.
-
Just finished band practice... Damn, we need a drummer. Ready to get back on stage.
-
On my way home
-
@JaredBusch said in What Are You Doing Right Now:
On my way home
Was just thinking about you the other day. Are the roads quieter up there?
They sure are where I live.
-
Watching some YouTube, drinking some rum.
