Rapid Desktop Replacement
-
@Jason said:
HP and Dell both have driver packs. Dells are better though IMO with driver packs.
http://www8.hp.com/us/en/ads/clientmanagement/drivers-pack.html
Cheers. That's pretty cool. I hadn't seen that before.
-
@BRRABill said:
All this stuff really is insane.
Not really. Remember it is 100% optional. There are excellent non-Windows product choices for customers that don't want to invest in license management.
-
@scottalanmiller said:
Not really. Remember it is 100% optional. There are excellent non-Windows product choices for customers that don't want to invest in license management.
I just mean it seems ... overly complicated.
-
@BRRABill said:
@scottalanmiller said:
Not really. Remember it is 100% optional. There are excellent non-Windows product choices for customers that don't want to invest in license management.
I just mean it seems ... overly complicated.
Licensing broadly used software has to be, or else people will find ways to use it for cheap. People will always look for loopholes and excuses. The software business is hard, especially when they don't make hardware. It's only complicated because they are trying to let Everyone use it in smart ways. If they only made it for one or two use cases and blocked everyone else, it would be easy to license but hard to use. Instead it is easy to use and hard to license.
But remember, its' always by choice.
-
If it is more complicated than it is valuable, then look at alternatives. If the licensing is not so complicated as to make the product not preferred, then they are within the logical pain thresholds.
-
Microsoft licensing isn't bad. Cisco makes all licensing complicated. Heck their EULA effectively blocks the used market unless you are a Cisco authorized dealer.
-
@BRRABill Check Veeam Endpoint Backup, please. It’s a free backup tool that has scheduled incremental application aware backups (thru MS VSS) and bare metal recovery functionality (similar/dissimilar hardware).
I am not aware of any other solution out there that can do all of the described at no cost. The only fee I can imagine is to share the feedback regarding this tool with me or any other veeam folks, but its optional XD
-
@angrydok said:
I am not aware of any other solution out there that can do all of the described for not cost.
FTFY
-
@scottalanmiller These Russians
Thanks! -
@angrydok Too much vodka!
-
@angrydok Thanks for chiming in.
I looked into that as an option, but it has the same Microsoft licensing restrictions as all the other non-free products I was looking at.
Really the main sticking point now is the spinning up of the image to test its viability for a BMR. The workaround seems to be to actually perform the BMR in a test scenario, but I imagine your product has a virtual spinup component to it as well, right?
Though apples to apples, if I get licensing taken care of, free is surely nice.
I have moved away from desktop backups. Iwas receiving threats via PM, so I figured that was the way to go.
-
@BRRABill said:
Really the main sticking point now is the spinning up of the image to test its viability for a BMR. The workaround seems to be to actually perform the BMR in a test scenario, but I imagine your product has a virtual spinup component to it as well, right?
No, Veeam is backup software, not a virtualization platform or appliance. This is a desktop focused product and would never have a virtualization component to it. It just backs you up and restores, you decide what to do.
Remember this is a full backup product, most of the use cases are not doing a BMR but restoring individual files. So the important restore use case you can test trivially anytime that you want.
If you want to do a BMR test you put another drive into the desktop that you are working with and do a restore to it and test that way.
But bottom line, no matter what products are made, don't do image restores of desktops.
-
I think I may have alluded to it, but I got the pleasure of rebuilding an entire server yesterday. Our main server, which died in the middle of the afternoon.
Karma, i guess.
I'm going to eventually do a full writeup and post it in a separate thread.
-
@hobbit666 said:
@Carnival-Boy said:
For example, I do a clean Windows 7 install. It doesn't have a network adapter driver. I go to hp.com and type in the model of the PC. It gives me two different options. I don't know which one is the card in my particular PC. How do I find out? The other issue is that downloading files from HP.com is just about the slowest website in the world. It can take hours.
Tip here, if you go to device manager and click on any device. Go into properties --> Details --> Select Hardware ID's. This will give you VEN and DEV numbers. Go to pcidatabase.com and put either number in and it will tell you the manufacturer and device, helps me a lot when I'm not sure what driver to get.
Thanks for this.
A list, not a forum page would be awesome for helpful weblinks like these.
-
@BRRABill said:
I think I may have alluded to it, but I got the pleasure of rebuilding an entire server yesterday. Our main server, which died in the middle of the afternoon.
Karma, i guess.
I'm going to eventually do a full writeup and post it in a separate thread.
You mentioned a disaster but did not get into details.
-
@scottalanmiller said:
You mentioned a disaster but did not get into details.
I posted a snippet on your RAID post. Our RAID array went poof!
-
@BRRABill said:
@scottalanmiller said:
You mentioned a disaster but did not get into details.
I posted a snippet on your RAID post. Our RAID array went poof!
Just saw it.
-
The good news is I have everyone back up and running.
-
@scottalanmiller said:
Imaging is not a good way to backup a machine because it assumes you are restoring to the same hardware. What if you need to restore to a different OS version (this could mean nothing more than different patch levels?)
Several times I have found that cloning data to different hardware is a disaster. Usually this occurs when I have different partition sizes because the disks are not an exact match. Windows flips its lid if it doesn't like the partition alignment. Things like disk queue length go down the toilet and I end up having to run a clean install in the end. Also you can end up with different chipset and network card drivers, etc.I think manufacturers started imaging with a "Recovery partition" for this very reason. Of course with Windows 8+ you can Refresh the OS on demand. In a virtualized situation this has never been a problem for me though; Only physical imaging and clones. That is my empirical experience and does not answer any of the questions the OP asked however.
To address the OP's question's:
-
Your software settings are vendor specific. You would have to investigate each software individually.
-
There are a ton of options to inventory software. Ideally you would do this from a central point of management.
Powershell
https://gallery.technet.microsoft.com/scriptcenter/Software-Inventory-using-f2870b19
OpenAudIT
https://opmantek.com-
If you have a donations database, I would first ask what is the RDBMS? If I could utilize some sort of transactional replication then it would happen.
-
Virtualization\Imaging
If you have an **OEM **license it's against the terms to reuse that license by the MS Licensing terms that I know. If you have a Retail license I dont think there is any issue doing a p2v and re-using the same license to go virtual. (double check with MS on that)
I hope that is what you were asking.
thx
-d -
-
@drewlander said:
- Virtualization\Imaging
If you have an **OEM **license it's against the terms to reuse that license by the MS Licensing terms that I know. If you have a Retail license I dont think there is any issue doing a p2v and re-using the same license to go virtual. (double check with MS on that)
He did and you can't because it requires VDI licensing. So you CAN if you have the additional VDI licensing, but you can't if you don't.
- Virtualization\Imaging
