EdgeRouter - openVPN restart

JaredBusch

@stacksofplates said in EdgeRouter - openVPN restart:

It's just a startup script under /etc/init.d. You should be able to just run
/etc/init.d/openvpn restart

Yes, but they make a command for it.

stacksofplates

@JaredBusch said in EdgeRouter - openVPN restart:

@stacksofplates said in EdgeRouter - openVPN restart:
It's just a startup script under /etc/init.d. You should be able to just run
/etc/init.d/openvpn restart
Yes, but they make a command for it.

Ya on my phone and didn't see your post until after I posted that.

JaredBusch

@gjacobse said in EdgeRouter - openVPN restart:

@JaredBusch said in EdgeRouter - openVPN restart:

First of all, restart vpn is for IPSEC services. Not OpenVPN services.

Second, you could not have restarted the router with that command because it does not have that capability.

Command used to restart the router
shutdown -r now

gods the things wrong here..

You implied the restart vpn caused a reboot.
There is a reboot command for that. Use it. why are you applying base OS commands when there is an entire set of commands layered on top to handle all the normal duties. Perhaps doing things you do not know in addition.

gjacobse

@JaredBusch said in EdgeRouter - openVPN restart:

@gjacobse said in EdgeRouter - openVPN restart:
@JaredBusch said in EdgeRouter - openVPN restart:

First of all, restart vpn is for IPSEC services. Not OpenVPN services.

Second, you could not have restarted the router with that command because it does not have that capability.

Command used to restart the router
shutdown -r now
gods the things wrong here..

You implied the restart vpn caused a reboot.

There is a reboot command for that. Use it. why are you applying base OS commands when there is an entire set of commands layered on top to handle all the normal duties. Perhaps doing things you do not know in addition.

Restart VPN and REBOOT are two wholly different things - I know that.

The command to restart the SERVICE wasn't found in the time I had to find it for a 14:00 EDT REBOOT. I wanted to do a restart of the service rather than a reboot as to not take the site down.

As the restart command wasn't found in the time I had, the shutdown -r now was used to reboot and thus restart the OpenVPN services.

Upon the reboot completion, the service was restarted normally and users were again able to sign in.

JaredBusch

0_1490647834741_upload-4837076d-4efd-4339-87f2-5e180ecf68b7
@gjacobse you need to step the f*** back and read things a little more carefully. because your little marked up rant there is all kinds of wrong if you are trying to reply to anything I said.

travisdh1

@gjacobse said in EdgeRouter - openVPN restart:

As the restart command wasn't found in the time I had, the shutdown -r now was used to reboot and thus restart the OpenVPN services.

alt text

So, the router actually rebooted instead of stopping? Because 'shutdown -r now' is a hard stop, not a reboot. I understand that you were most likely just trying to fix things, but that line especially doesn't make sense.

gjacobse

@travisdh1 said in EdgeRouter - openVPN restart:

@gjacobse said in EdgeRouter - openVPN restart:

As the restart command wasn't found in the time I had, the shutdown -r now was used to reboot and thus restart the OpenVPN services.

So, the router actually rebooted instead of stopping? Because 'shutdown -r now' is a hard stop, not a reboot. I understand that you were most likely just trying to fix things, but that line especially doesn't make sense.

Restart linux
The shutdown command can be used to restart a system with the r option instead of the h option. Usage is same as before. Just replace the h option with r option.

# shutdown -r +5 "Server will restart in 5 minutes. Please save your work."

Shutdown linux
To shutdown a machine call the shutdown command like this

# shutdown -h now
The h option is for halt which means to stop. The second parameter is the time parameter. "now" means that shutdown the system right away.

Didn't need to shutdown (halt) the router, I'm not there to restart it. So rather than use -h, the -r was used.

As the service restart wasn't found in the time I had - the router was rebooted as a 'this is what I have now, and the service window is NOW'

I never said that the router rebooted itself. The router was rebooted as the only other option to getting the OpenVPN service to restart......

travisdh1

@gjacobse said in EdgeRouter - openVPN restart:

@travisdh1 said in EdgeRouter - openVPN restart:

@gjacobse said in EdgeRouter - openVPN restart:

As the restart command wasn't found in the time I had, the shutdown -r now was used to reboot and thus restart the OpenVPN services.

So, the router actually rebooted instead of stopping? Because 'shutdown -r now' is a hard stop, not a reboot. I understand that you were most likely just trying to fix things, but that line especially doesn't make sense.
Restart linux
The shutdown command can be used to restart a system with the r option instead of the h option. Usage is same as before. Just replace the h option with r option.

# shutdown -r +5 "Server will restart in 5 minutes. Please save your work."
Shutdown linux
To shutdown a machine call the shutdown command like this

# shutdown -h now
The h option is for halt which means to stop. The second parameter is the time parameter. "now" means that shutdown the system right away.
Didn't need to shutdown (halt) the router, I'm not there to restart it. So rather than use -h, the -r was used.

As the service restart wasn't found in the time I had - the router was rebooted as a 'this is what I have now, and the service window is NOW'

I never said that the router rebooted itself. The router was rebooted as the only other option to getting the OpenVPN service to restart......

Ah, I use the shutdown command so infrequently that I'm forgetting what the option switches for it are. That's a lot of typing for

reboot

gjacobse

@travisdh1 said in EdgeRouter - openVPN restart:

@gjacobse said in EdgeRouter - openVPN restart:
@travisdh1 said in EdgeRouter - openVPN restart:

@gjacobse said in EdgeRouter - openVPN restart:

As the restart command wasn't found in the time I had, the shutdown -r now was used to reboot and thus restart the OpenVPN services.

So, the router actually rebooted instead of stopping? Because 'shutdown -r now' is a hard stop, not a reboot. I understand that you were most likely just trying to fix things, but that line especially doesn't make sense.
Restart linux
The shutdown command can be used to restart a system with the r option instead of the h option. Usage is same as before. Just replace the h option with r option.

# shutdown -r +5 "Server will restart in 5 minutes. Please save your work."
Shutdown linux
To shutdown a machine call the shutdown command like this

# shutdown -h now
The h option is for halt which means to stop. The second parameter is the time parameter. "now" means that shutdown the system right away.
Didn't need to shutdown (halt) the router, I'm not there to restart it. So rather than use -h, the -r was used.

As the service restart wasn't found in the time I had - the router was rebooted as a 'this is what I have now, and the service window is NOW'

I never said that the router rebooted itself. The router was rebooted as the only other option to getting the OpenVPN service to restart......
Ah, I use the shutdown command so infrequently that I'm forgetting what the option switches for it are. That's a lot of typing for
reboot

Ha - with the limited experience in CLI, I went with what I knew would work.. I used that command in Windows and Linux - so is second nature to type. I'll forgo using the GUI in Win10 and type that ,..... Is it 'right' - meh,.. maybe not. but it works.

JaredBusch

@gjacobse said in EdgeRouter - openVPN restart:

maybe not. but it works.

How do you know? Have you looked into the reboot script to see what it actually does and contrast that with the shutdown -r now command?

It forces a hard restart of the system, but does it actually "work"?

Carnival Boy

Wow, tough crowd on this thread.

BRRABill

@Carnival-Boy said in EdgeRouter - openVPN restart:

Wow, tough crowd on this thread.

You new to ML?

helix

This shit still doesn't work properly through the EdgeOS-provided /etc/init.d/openvpn script. If you do /etc/init.d/openvpn status or systemctl status openvpn you get a green-light active (exited) but this is deceiving because it's a one-shot service and not a proper systemd daemon. systemctl edit --full shows the following piece of crap "service":

[Unit]
Description=OpenVPN service
After=network.target

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/bin/true
ExecReload=/bin/true
WorkingDirectory=/etc/openvpn

[Install]
WantedBy=multi-user.target

/bin/true? Are you fucking kidding me, Ubiquiti? I pay thousands of €s for your shit and you still manage to be so bad at Linuxing. At least don't pretend you have a service or properly document your shit, ubnt.

https://community.ui.com/questions/Restarting-OpenVPN/2e5c4e8b-ab61-49f1-a25b-e5aa23130d48 suggests that reset openvpn interface works but… it didn't. You can try it before you try the following.

What helped me was to change settings so the config got regenerated. For example you could set or delete the following option:

interfaces openvpn vtun0 openvpn-option "--cipher AES-256-CBC"

then commit and see with sudo ss -lpn | grep :1194 that the thing's started. If OpenVPN is running or doesn't restart, you can killall openvpn a few times with forced Enter (hit the Enter key very hard, it's important) before you change the settings.

Just wanted to mention this to anyone finding this thread through "openvpn restart edgerouter doesn't work" in google or similar. I hope I sweared enough for my first fucking post in this damn nice forum