XenServer installation SR issue

AdamF

@Danp Following that guide.... " A PBD already exists connecting the SR to the host"

Danp

@fuznutz04 That was for the xe pbd-create? Did you try performing the xe pbd-plug?

AdamF

@Danp yes, also an error. I just stepped away from my desk so don't remember what it was at the moment

Danp

@fuznutz04 Details are important.

If there's nothing meaningful stored on the array, you may be better off to just blow it away and start over from scratch.

AdamF

@Danp I did that.. Twice already. Brand new installations

AdamF

@Danp said in XenServer installation SR issue:

@fuznutz04 That was for the xe pbd-create? Did you try performing the xe pbd-plug?

[root@xenserver ~]# xe pbd-plug uuid=484dbd7d-08b0-0305-eae8-c59ebea39a36
Error code: SR_BACKEND_FAILURE_52
Error parameters: , Logical Volume mount/activate error [opterr=FSCK failed on /dev/XSLocalEXT-0bff8e3b-dd7c-c3c4-3125-22569f5bbd77/0bff8e3b-dd7c-c3c4-3125-22569f5bbd77. Errno is 8],

Danp

@fuznutz04 IDK. Seems odd that this has occurred multiple times. Found this forum post that you may want to review.

momurda

what is the output of vgs, lvs, pvs from the console?
Seems like either your lvm layer is bad, or the actual raid array is bad.
Have you tried to unmount this and then runs fsck?

Really weird that the local sr wasn't auto created for after install. It is like the first thing that happens when you connect to XS with XC.
Since it is not working you could just reinstall and try again, there shouldn't be an thing on it at this point.

BRRABill

@momurda said

Since it is not working you could just reinstall and try again, there shouldn't be an thing on it at this point.

I think he said he did that a few times already.

I wonder if it is indeed something with the array?

BRRABill

XS installs are usually pretty pain-free.

Dashrender

I ask this for understanding sake.

When you install XS on a hardware RAID Array, how does XS see the remaining disk? Does it see it as a completely different disk from the one XS is installed on? or does it realize it's just empty space and create an additional partition to whatever size you dictate?

BRRABill

@Dashrender said in XenServer installation SR issue:

I ask this for understanding sake.

When you install XS on a hardware RAID Array, how does XS see the remaining disk? Does it see it as a completely different disk from the one XS is installed on? or does it realize it's just empty space and create an additional partition to whatever size you dictate?

Since it is a DELL H700 (I have the H710) it's just all one big array. No slicing it up from the hardware level.

Would have made things so much easier.

momurda

On my xs 6.5 install (which originally was 6.0 I think way before I started here) xs is installed on sda which is the local disk array. The partitions for xs are sda1 and sda2 while sda3 is the local sr. I didn't originally set this up but I would think that you just give XS a whole array, then let it take what it wants for itself, it then gives you the rest to use as local SR.

AdamF

@momurda said in XenServer installation SR issue:

what is the output of vgs, lvs, pvs from the console?
Seems like either your lvm layer is bad, or the actual raid array is bad.
Have you tried to unmount this and then runs fsck?

Really weird that the local sr wasn't auto created for after install. It is like the first thing that happens when you connect to XS with XC.
Since it is not working you could just reinstall and try again, there shouldn't be an thing on it at this point.

[root@xenserver ~]# vgs
  VG                                              #PV #LV #SN Attr   VSize VFree
  XSLocalEXT-0bff8e3b-dd7c-c3c4-3125-22569f5bbd77   1   1   0 wz--n- 5.42t    0

[root@xenserver ~]# lvs
  LV                                   VG                                              Attr       LSize Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  0bff8e3b-dd7c-c3c4-3125-22569f5bbd77 XSLocalEXT-0bff8e3b-dd7c-c3c4-3125-22569f5bbd77 -wi-a----- 5.42t

[root@xenserver ~]# pvs
  PV         VG                                              Fmt  Attr PSize PFree
  /dev/sda3  XSLocalEXT-0bff8e3b-dd7c-c3c4-3125-22569f5bbd77 lvm2 a--  5.42t    0

And yes, I've reinstalled twice. The second time, I completely destroyed the RAID array, and created a new one. Then ran a Fast Init on it and install XS. That's all I've done to get to the point of error.

momurda

I think you may need to use a different uuid in your xe pbd-plug command
Here is a reference article
http://support.citrix.com/article/CTX121896

This one in your case(I think):
xe pbd-plug uuid=0bff8e3b-dd7c-c3c4-3125-22569f5bbd77

momurda

Ah wait. I see the type in the Local SR is ext3
On my XSs they are LVM
Did you format the lv?

AdamF

@momurda No, I didn't format the lv. Is that something done during the installation?

momurda

From the 7.0 Admin guide
5.2.2. Local EXT3
Using EXT3 enables Thin Provisioning on local storage. However, the default Storage Repository type is LVM as it gives a consistent write performance and, prevents storage over-commit. Customers using EXT3 may see reduced performance when carrying out VM lifecycle operations such as VM Create, suspend/resume and when initially creating large files from within the VM.
Local disk EXT SRs must be configured using the XenServer CLI.
5.2.2.1. Creating a Local EXT3 SR (ext)

Device-config parameters for ext SRs:
Parameter Name Description Required? Device device name on the local host to use for the SR
To create a local ext SR on /dev/sdb use the following command:

xe sr-create host-uuid=<valid_uuid> content-type=user \ name-label=<"Example Local EXT3 SR"> shared=false \ device-config:device=/dev/sdb type=ext

Danp

@fuznutz04 Any update?

AdamF

@Danp

Was just about to post this. I tried to do a fsck on the drive. See below screenshot.