IT Survey: Preemptive Drive Replacement in RAID Arrays
-
I can't say that I have heard of this being done to 'keep an array healthy'
I have wondered if it was possible to do something SIMILAR as a method of making backups....
-
Could it be that they keep a 'bank' of drives and to cycle through them keeps them at a 'balanced' run time, similar to rotating tires (tyres) on a car?
-
@gjacobse said:
Could it be that they keep a 'bank' of drives and to cycle through them keeps them at a 'balanced' run time, similar to rotating tires (tyres) on a car?
I would not think so, the stated purpose was to specifically unbalance them.
-
I have never heard of it, nor would I do it.
It is a waste of money. From this side of RAID stuff, the entire point of the RAID array is to be able to operate degraded with a drive down.
-
Can we do a wider poll? Right now this is just limited to the MangoLassi membership.
But a single poll website, advertised on different communities might give a different insight in terms of metrics.
Only time I have replaced drives is when I start hearing less than healthy noises from them on client machines, never on a live raid array.
-
I've heard of doing it every 2 - 3 years, but not as a part of routine maintenance.
What is schedule for routine maintenance with where you heard this?
-
I've never heard of this until today. So no we don't do it here nor anywhere else I've worked.
-
To follow up, I've never performed it either. But have heard people say that they replace their drives to avoid the urgent rush of a RAID being depreciated, because of a failed drive.
-
@DustinB3403 said:
To follow up, I've never performed it either. But have heard people say that they replace their drives to avoid the urgent rush of a RAID being depreciated, because of a failed drive.
Wouldn't it be just as good to have a cold spare on a shelf waiting for a failure?
-
I've never done pre-emptive replacement on drives that are showing no errors.
-
@DustinB3403 said:
To follow up, I've never performed it either. But have heard people say that they replace their drives to avoid the urgent rush of a RAID being depreciated, because of a failed drive.
Eh? The array is in a degraded state while it's being rebuilt. What's the difference? Are they not running backups?
-
I've definitely never heard of this before, and without some solid evidence on how the expense is worthwhile, data loss that is already super low is some how even lower, I wouldn't consider it.
-
I don't understand the rational either.
-
@coliver said:
@DustinB3403 said:
To follow up, I've never performed it either. But have heard people say that they replace their drives to avoid the urgent rush of a RAID being depreciated, because of a failed drive.
Wouldn't it be just as good to have a cold spare on a shelf waiting for a failure?
I absolutely agree that having a spare drive on the shelf is more effective, than replacing a drive even if it hasn't failed.
Some people simply don't want to understand what has to be performed to rebuild the array when you replace drives just to replace them.
-
I'm guessing this isn't exactly what you're referring to but I thought I'd add my experience anyway. I guess it depends on what you mean by "perfectly healthy". One manufacturer might consider a drive perfectly healthy while another might not.
Certain arrays will look at bad blocks to decide to preemptively to stop using a drive and switch to a hot spare if the number of bad blocks has reached a certain percentage and then they will send you a replacement drive. The number of bad blocks that constitutes a drive that is perfectly healthy vs impending failure varies.
I've contacted a vendor before and sent diagnostic logs on arrays that were going to fall off support to analyze drives that hadn't necessarily crossed that line but might raise a few flags to see if I could get some drives replaced.
As for replacing drives that show no signs at all of failing but just replacing due to being a certain age. I've never done this.
-
I mentioned this to an associate of mine and he came up with a possible situation where this could matter, but we both agreed it was pretty unlikely.
His reason was, if the labor pool for emergency repair is small to handle all the emergencies that are happening. Of course there are tons of mitigations for this, but I though the general idea had merit.
-
@Dashrender Also maintenance on exceptionally expensive to access sites (think weather station in Greenland or something)
-
@MattSpeller said:
@Dashrender Also maintenance on exceptionally expensive to access sites (think weather station in Greenland or something)
That still doesn't make sense because of the failure curve of hard drives. We have no idea if the new drive will die immediately or soon after installation. They would then have to have a second maintenance event to replace the failed drive. Now this may happen either way but it makes more sense to wait until the drive actually fails then to preemptively replace it. Especially if you can get months to years out of the drive you would have replaced.
-
@coliver It makes more sense in that scenario than it does in any other I can think of!
I can think of much better ways to setup a remote station like that - I'm just trying to see if there's a scenario where his advice is actually... good.
-
For the hard to access station, they should have spares on a shelf, but in theory, when you buy a drive and store it for 3 years, what happens with the warranty if you put it in and it dies after a month?
