What Are You Doing Right Now
-
@jt1001001 said in What Are You Doing Right Now:
@DustinB3403 wire cutters/strippers and duct tape??
I'd sooner go and purchase what is needed.
-
@DustinB3403 What kind of mics and what kind of connectors? The only "new" mic tech is having a USB connection, the rest have been XLR or 1/4" since the 1940s.
-
@RojoLoco said in What Are You Doing Right Now:
@DustinB3403 What kind of mics and what kind of connectors? The only "new" mic tech is having a USB connection, the rest have been XLR or 1/4" since the 1940s.
There are mini-XLRs too with 3, 4 and 5 pins as well as the small 3.5mm phono connectors. Unfortunately. Probably others too.
-
@Pete-S said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@DustinB3403 What kind of mics and what kind of connectors? The only "new" mic tech is having a USB connection, the rest have been XLR or 1/4" since the 1940s.
There are mini-XLRs too with 3, 4 and 5 pins as well as the small 3.5mm phono connectors.
Yes, but those are subsets of XLR and 1/4 inch. 5 pin mini XLR is either a stereo mic or a DMX lighting connector (carries control signals, not audio). Adapters for those are easy to find.
-
@RojoLoco said in What Are You Doing Right Now:
@Pete-S said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@DustinB3403 What kind of mics and what kind of connectors? The only "new" mic tech is having a USB connection, the rest have been XLR or 1/4" since the 1940s.
There are mini-XLRs too with 3, 4 and 5 pins as well as the small 3.5mm phono connectors.
Yes, but those are subsets of XLR and 1/4 inch. 5 pin mini XLR is either a stereo mic or a DMX lighting connector (carries control signals, not audio). Adapters for those are easy to find.
Yes, I know. I just saying there are many opportunities to have connectors that don't fit.
-
@Pete-S said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Pete-S said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@DustinB3403 What kind of mics and what kind of connectors? The only "new" mic tech is having a USB connection, the rest have been XLR or 1/4" since the 1940s.
There are mini-XLRs too with 3, 4 and 5 pins as well as the small 3.5mm phono connectors.
Yes, but those are subsets of XLR and 1/4 inch. 5 pin mini XLR is either a stereo mic or a DMX lighting connector (carries control signals, not audio). Adapters for those are easy to find.
Yes, I know. I just saying there are many opportunities to have connectors that don't fit.
True. But I wouldn't expect to see overly odd connectors in an office setting. Worst case ontario would be that mini 4 pin on a headset. Or having a mono 3.5mm plug and a stereo port (or vice-versa). Personally, I say "impedance be damned!!!" If I can get a string of adapters, then I'm plugging this in here.
-
@RojoLoco Ontario truly is the worst case.
-
@wirestyle22 said in What Are You Doing Right Now:
Thanks @BRRABill for hooking me up with a rack
I see from your Risk 2210 that you are a man of consequence and refined taste.
-
@RojoLoco We have Shure PG1 and shure ulx1 g3 units that we would want to incorporate together.
The units that these would connect to, don't have the same ports as the wireless mic amp we have from shure. We made it work with what we had, which was 1 G3 and a handheld.
-
@DustinB3403 said in What Are You Doing Right Now:
@RojoLoco We have Shure PG1 and shure ulx1 g3 units that we would want to incorporate together.
The units that these would connect to, don't have the same ports as the wireless mic amp we have from shure. We made it work with what we had, which was 1 G3 and a handheld.
So the issue is with the wireless receiver outputs? I can only assume that's what you mean by "wireless mic amp".
Transmitters send through the air, receiver takes that signal and outputs via cable to mixer/amp/speakers. Which one has the mismatched plugs? If you can post a pic that would help too.
-
@RojoLoco I mentioned two body packs, if those are the transmiters (the things with Mics) those aren't directly the culprit. The receiver for the PG1's seems to be the issue as they don't align with the other equipment.
The goal would be to go from the 2 usable mics at a time that we have currently to 4 usable mics (all wireless) with 2 lapel (or over the ear) and 2 handheld.
-
@DustinB3403 said in What Are You Doing Right Now:
@RojoLoco I mentioned two body packs, if those are the transmiters (the things with Mics) those aren't directly the culprit. The receiver for the PG1's seems to be the issue as they don't align with the other equipment.
The goal would be to go from the 2 usable mics at a time that we have currently to 4 usable mics (all wireless) with 2 lapel (or over the ear) and 2 handheld.
You have to be sure the frequency ranges match. I think Shure uses letter codes. And the receiver need to be 4 channel (each will have it's own output to the mixer). If the body packs are all within the same range, maybe a new receiver would fix it. If the transmitters are in different ranges, maybe you can take them back to swap for the right frequency. Or add a 2nd receiver (2 channel) that works with 2 of the transmitters.
-
@DustinB3403 or you could easily get a 2 handheld kit in a different range, that would add 2 to the existing setup.
-
So @RojoLoco and @DustinB3403 what are the chances that this conversation will materialize into a dave matthews cover band?
-
@wirestyle22 the only thing I'd cover Dave Matthews with would be a weighted blanket while he was swimming...
-
@RojoLoco :face_with_tears_of_joy: :face_with_tears_of_joy: :face_with_tears_of_joy:
-
and with 10 minutes left for the day I got everything set up for me to leave tomorrow morning.
Next time I talk to y'all I'll be in Huston for a 3 hour layover, and then san diego
-
@WrCombs said in What Are You Doing Right Now:
and with 10 minutes left for the day I got everything set up for me to leave tomorrow morning.
Next time I talk to y'all I'll be in Huston for a 3 hour layover, and then san diego
Safe trip!
-
@scottalanmiller said in What Are You Doing Right Now:
@WrCombs said in What Are You Doing Right Now:
and with 10 minutes left for the day I got everything set up for me to leave tomorrow morning.
Next time I talk to y'all I'll be in Huston for a 3 hour layover, and then san diego
Safe trip!
appreciate it.
-
Just checking in here.
