EMC ScaleIO Available for Free for Non-Production Use
-
@jason says that the EULA allows for production usage, just without support.
-
@scottalanmiller is this something like ceph and glusterfs?
-
EULA from the free download page you accept before downloading.
EMC ScaleIO(R) Limited Software License Agreement IMPORTANT – PLEASE READ CAREFULLY. 1. DELIVERY AND ACCEPTANCE. This Software contains computer programs and other proprietary material and information, the use of which is subject to and expressly conditioned upon acceptance of this EMC ScaleIO Limited Software License Agreement (the "Agreement"). This Agreement is a legally binding document between you (meaning the individual person or the entity that the individual represents that has obtained the Software for an Internal Business Purpose and not, for example, for outright resale) (the "Customer") and EMC (which means (i) EMC Corporation, if Customer is located in the United States; (ii) the local EMC sales subsidiary, if Customer is located in a country in which EMC Corporation has a local sales subsidiary; and (iii) EMC Information Systems International ("EISI"), if Customer is located outside the United States and in a country in which EMC Corporation does not have a local sales subsidiary). Unless EMC agrees otherwise in writing, this Agreement governs Customer's use of the Software except to the extent all or any portion of the Software is: (a) the subject of a separate written agreement; or (b) governed by a third party licensor's terms and conditions. Capitalized terms have meaning stated in the Agreement. If Customer does not have a currently enforceable, written and separately signed software license agreement directly with EMC or the Distributor from whom Customer obtained this Software, then by clicking on the "Agree" or "Accept" or similar button at the end of this Agreement, or proceeding with the installation, downloading, use or reproduction of this Software, or authorizing any other person to do so, you are representing to EMC that you are: (i) authorized to bind the Customer; and (ii) agreeing on behalf of the Customer that the terms of this Agreement shall govern the relationship of the parties with regard to the subject matter in this Agreement and are waiving any rights, to the maximum extent permitted by applicable law, to any claim anywhere in the world concerning the enforceability or validity of this Agreement. If Customer has a currently enforceable, written and separately signed software license agreement directly with EMC or the Distributor from whom Customer obtained this Software, then by clicking on the "Agree" or "Accept" or similar button at the end of this Agreement, or proceeding with the installation, downloading, use or reproduction of this Software, or authorizing any other person to do so, you are representing that you are: (i) authorized to bind the Customer; and (ii) agreeing on behalf of the Customer that the terms of such written, signed agreement shall replace and supersede the terms of this Agreement and shall govern the relationship of the parties with regard to this Software, and are waiving any rights, to the maximum extent permitted by applicable law, to any claim anywhere in the world concerning the enforceability or validity of such written signed agreement. If you do not have authority to agree to the terms of this Agreement on behalf of the Customer, or do not accept the terms of this Agreement on behalf of the Customer, click on the "Cancel" or "Decline" or other similar button at the end of this Agreement and/or immediately cease any further attempt to install, download or use this Software for any purpose, and remove any partial or full copies made from this Software. EMC and Customer enter into this Agreement and this Agreement shall become effective on the date on which Customer downloads or Uses the Software, whichever occurs first (the “Effective Date”). NOW, THEREFORE, in consideration of the premises and obligations contained herein, it is agreed as follows: 2. DEFINITIONS. A. "Affiliate" means a legal entity that is controlled by, controls, or is under common "control" of EMC or Customer. "Control" means more than 50% of the voting power or ownership interests. B. "Confidential Information" means and includes all proprietary information of EMC, including without limitation, all source code, software designs, and development environments of any nature whatsoever. Confidential Information does not include information that is: (i) rightfully in the receiving party's possession without obligation of confidentiality prior to receipt from the disclosing party; (ii) a matter of public knowledge through no fault of the receiving party; (iii) rightfully furnished to the receiving party by a third party without restriction on disclosure or use; or (iv) independently developed by the receiving party without use of or reference to the disclosing party's Confidential Information. C. "Distributor" means a reseller, distributor, system integrator, service provider, independent software vendor, value-added reseller, OEM or other partner that is authorized by EMC to license Software to end users. The term shall also refer to any third party duly authorized by a Distributor to license Software to end users. D. "Documentation" means the then-current, generally available, written user manuals and online help and guides for Software provided by EMC. E. “Internal Business Purposes” means an internal (non-commercial) Use for the purpose(s) of testing and demonstrating the features of the Software, and not for Customer product development, product testing, or other Customer research and development or commercial purposes. F. "Software" means the EMC software product which requires acceptance of this Agreement, and any copies made by or on behalf of Customer, Software Releases, and all Documentation for the foregoing. G. "Software Release" means any subsequent version of Software provided by EMC after initial delivery of Software but does not mean a new item of Software. H. "Support Services" means the annual service available from EMC (at its discretion) or its designee which provides Software Releases and support services for Software. I. “Use” or “Using” means to perform as defined under 17 U.S.C. Section 101 et seq. or other applicable copyright statute. For avoidance of doubt, Use does not include the right to- i) create derivative works, ii) distribute, iii) publically display, iv) transmit, v) reproduce, or vi) sublicense the Software. 3. LICENSE TERMS. A. License Grant. Subject to Customer's compliance with this Agreement, EMC grants to Customer a non-exclusive, world-wide, royalty free, full-paid, terminable, and nontransferable license, under EMC’s copyrights, to Use: (i) the Software for the Customer's Internal Business Purposes; and (ii) the Documentation related to Software for the purpose of supporting Customer's Use of Software for Customer’s Internal Business Purposes. To the extent applicable to Software, Customer may be required to follow EMC's then current product registration process, if any, to obtain and input an authorization key or license file. Documentation is licensed solely for purposes of supporting Customer's Use of Software as permitted in this Section. B. License Restrictions. All Software licenses granted herein are for the Use of object code only. Notwithstanding the definition of Use (see Section 2.I), the Customer is: (a) permitted to reproduce one copy of the Software in connection with the Customer’s authorized Use for Internal Business Purposes or for backup purposes; (b) authorized to sublicense its Use rights under Section 3.A to a contractor employed by the Customer so along as the rights granted to the contractor do not exceed the rights granted under this Agreement; and (c) Customer may reproduce the Documentation insofar as reasonably necessary in connection with Customer's authorized Use for Internal Business Purposes of Software. Customer shall not, without EMC's prior written consent: (i) use Software in a service bureau; (ii) use or make the Software available as service to a third party; (iii) perform or disclose to any third party the results of any comparative or competitive analyses, benchmark testing or analyses of Software performed by or on behalf of Customer; (iv) make available Software in any form to anyone other than Customer's employees or contractors; (v) transfer Software to an Affiliate or a third party; or (vi) publically disclose Confidential Information associated with the Software. C. Software Releases. Software Releases shall be subject to the license terms applicable to Software. D. Audit Rights. EMC (including its independent auditors) shall have the right to audit Customer's usage of Software to confirm compliance with the agreed terms stated herein. Such audit is subject to reasonable advance notice by EMC and shall not unreasonably interfere with Customer's business activities. Customer will provide EMC with the support required to perform such audit and will, without prejudice to other rights of EMC, address any non-compliant situations identified by the audit by forthwith procuring additional licenses for a fee. E. Reserved Rights. All rights not expressly granted to Customer are reserved. In particular, no title to, or ownership of, the Software is transferred to Customer. Customer shall reproduce and include copyright and other proprietary notices on and in any copies of the Software or Documentation. For avoidance of doubt, Customer shall not remove any copyright and other proprietary notices from any copy of the Software or Documentation. Unless expressly permitted by applicable mandatory law, Customer shall not modify, enhance, supplement, create derivative works from, reverse assemble, reverse engineer, decompile or otherwise reduce to human readable form the Software without EMC's prior written consent, nor shall Customer permit any third party to do the same. 4. DISCLAIMER OF WARRANTY. A. DISCLAIMER OF WARRANTIES GENERALLY. EMC PROVIDES ALL SOFTWARE HEREUNDER ON AN “AS-IS,” “WHERE IS” BASIS, AND MAKES NO OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL, AND ALL OTHER WARRANTIES ARE SPECIFICALLY EXCLUDED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, AND ANY WARRANTY ARISING BY STATUTE, OPERATION OF LAW, COURSE OF DEALING OR PERFORMANCE, OR USAGE OF TRADE. UNLESS OTHERWISE AGREED TO IN WRITING, EMC SHALL HAVE NO OBLIGATION TO PROVIDE SUPPORT, SUPPORT SERVICES, OR MAINTENANCE OF ANY KIND UNDER THIS AGREEMENT. B. Express Disclaimer of IP Warranty and Representation. EMC makes no warranty or representation regarding third-party intellectual property rights infringed through the Use (or use) of the Software, and shall have no liability to Customer for any action (or any prior related claims) brought by or against Customer alleging that Customer's sale, use or other disposition of Software licensed under this Agreement infringes any patent, copyright, trade secret or other intellectual property right. In event of such an action, EMC retains the right to terminate this Agreement and take possession of the Software. UNLESS OTHERWISE AGREED TO IN WRITING, THIS SECTION STATES EMC'S ENTIRE LIABILITY WITH RESPECT TO ALLEGED INFRINGEMENTS OF INTELLECTUAL PROPERTY RIGHTS BY THE SOFTWARE OR ANY PART OF IT OR ITS OPERATION. THIS SECTION STATES EMC'S ENTIRE LIABILITY WITH RESPECT TO ALLEGED INFRINGEMENTS OF INTELLECTUAL PROPERTY RIGHTS BY SOFTWARE OR ANY PART OF IT OR ITS OPERATION. C. Disclaimer of Warranties Related to Performance. No representation or other affirmation of fact, including but not limited to a statement regarding capacity, suitability for use (or Use) or performance of Software, whether made by EMC employees or otherwise, shall be deemed to be a warranty for any purpose or give rise to any liability of EMC whatsoever unless contained in this Agreement or otherwise agreed to in writing by EMC. 5. NO INDEMNITY. A. No Indemnification Generally. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall EMC be liable to Customer for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this Agreement or out of the use (or Use) or inability to use (or Use) the Software (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Customer has been advised of the possibility of such damages. B. No Indemnification for Intellectual Property. EMC shall have no liability to Customer for any action (and all prior related claims) brought by or against Customer alleging that Customer’s use (or Use) or other disposition of any Software infringes any patent, copyright, trade secret or other intellectual property right. In event of such an action, EMC retains the right to terminate this Agreement and take possession of the Software. This section states EMC’s entire liability with respect to alleged infringements of intellectual property by the Software, or any part of the Software by its operation. C. LIMITATION ON LIABILITY. IN NO EVENT WILL EMC BE LIABLE TO CUSTOMER FOR ANY DIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF USE, DATA, BUSINESS OR PROFITS) OR FOR THE COST OF PROCURING SUBSTITUTE PRODUCTS ARISING OUT OF OR IN CONNECTION WITH THIS AGREEMENT OR THE USE OF THE SOFTWARE, WHETHER SUCH LIABILITY ARISES FROM ANY CLAIM BASED UPON CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, AND WHETHER OR NOT EMC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS OR DAMAGE. THE FOREGOING LIMITATIONS WILL SURVIVE AND APPLY EVEN IF ANY LIMITED REMEDY SPECIFIED IN THIS AGREEMENT IS FOUND TO HAVE FAILED OF ITS ESSENTIAL PURPOSE. IN ANY CASE, EMC’S AGGREGATE LIABILITY TO CUSTOMER ARISING WITH RESPECT TO THIS AGREEMENT WILL NOT EXCEED FIFTY UNITED STATES DOLLARS ($50). SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO CUSTOMER. D. Special Exclusion. IN JURISDICTIONS THAT DO NOT ALLOW LIMITATION OR EXCLUSION OF CONSEQUENTIAL OR INCIDENTAL DAMAGES, ALL OR A PORTION OF SECTION 5.A ABOVE MAY NOT APPLY. 6. TERMINATION. A. Customer or EMC may terminate this Agreement for its convenience upon thirty (30) days' notice to the non-terminating party. Either Customer or EMC may terminate this Agreement upon written notice due to the other party's material breach of the terms governing use of the Software; provided that such breach is not cured within thirty (30) days after the provision of written notice to the breaching party specifying the nature of such breach. Upon termination of this Agreement, Customer shall cease all use and return or certify destruction of the applicable Software (including copies) to EMC. Any provision that by its nature or context is intended to survive any termination or expiration, including but not limited to provisions relating to Confidential Information, disclaimer of warranty, and indemnity, shall so survive. For avoidance of doubt, any provision related to licensing shall cease to have legal effect when this Agreement is terminated. 7. MISCELLANEOUS. A. References. EMC may identify Customer for reference purposes unless and until Customer expressly objects in writing B. Notices and Language. Any notices permitted or required under this Agreement shall be in writing, and shall be deemed given when delivered: (i) in person; (ii) by overnight courier, upon written confirmation of receipt; (iii) by certified or registered mail, with proof of delivery; (iv) by facsimile transmission with confirmation of receipt; or (v) by email, with confirmation of receipt (except for routine business communications issued by EMC, which shall not require confirmation from Customer). Notices shall be sent to the address, facsimile number or email address set forth below, or at such other address, facsimile number or email address as provided to the other party in writing. Notices shall be sent to: EMC Corporation, 176 South Street, Hopkinton, MA 01748. Fax for legal notices: 508.293.7780. Email for legal notices: [email protected]. The parties agree that this Agreement has been written in the English language, that the English language version shall govern and that all notices shall be in the English language. C. Entire Agreement. This Agreement: (i) is the complete statement of the Agreement of the parties with regard to the subject matter hereof; and (ii) may be modified only by a writing signed by both parties. All terms of any purchase order or similar document provided by Customer, including but not limited to any pre-printed terms thereon and any terms that are inconsistent or conflict with this Agreement, shall be null and void and of no legal force or effect. D. Force Majeure. Except for the payment of fees, if any, due EMC from Customer, neither party shall be liable under this Agreement because of a failure or delay in performing its obligations hereunder on account of any force majeure event, such as strikes, riots, insurrection, terrorism, fires, natural disasters, acts of God, war, governmental action, or any other cause which is beyond the reasonable control of such party. E. Assignment. Customer shall not assign this Agreement or any right or delegate any performance without EMC's prior written consent, which consent shall not be unreasonably withheld. Customer shall promptly notify EMC, and EMC may terminate this Agreement on thirty days' (30) notice, if Customer merges with or is acquired by a third party or otherwise undergoes a change of control. F. Governing Law. This Agreement is governed by: (i) the laws of the Commonwealth of Massachusetts when EMC means EMC Corporation; (ii) the laws of the applicable country in which the applicable EMC subsidiary is registered to do business when EMC means the local EMC subsidiary, and (iii) the laws of Ireland when EMC means EISI. In each case, the applicability of laws shall exclude any conflict of law rules. The U.N. Convention on Contracts for the International Sale of Goods shall not apply. In the event of a dispute concerning this Agreement, Customer consents to the sole and exclusive personal jurisdiction of the courts of competency in the location where EMC is domiciled. G. Waiver. No waiver shall be deemed a waiver of any prior or subsequent default hereunder. If any part of this Agreement is held unenforceable, the validity of the remaining provisions shall not be affected. H. Partial Invalidity. If any part of this Agreement, a purchase order or an EMC quote is held unenforceable, the validity of the remaining provisions shall not be affected. I. Government Regulations and Export Control. Software and the technology included therein provided under this Agreement are subject to governmental restrictions on: (i) exports from the U.S.; (ii) exports from other countries in which such Software and technology included therein may be produced or located; (iii) disclosures of technology to foreign persons; (iv) exports from abroad of derivative products thereof; and (v) the importation and/or use of such Software and technology included therein outside of the United States or other countries (collectively, "Export Laws"). Customer shall comply with all Export Laws and EMC export policies to the extent such policies are made available to Customer by EMC. Diversion contrary to U.S. law or other Export Laws is expressly prohibited. J. Injunctive Relief. Customer acknowledges that a violation of the sections contained in this Agreement may cause irreparable harm to EMC not adequately compensable by monetary damages irrespective of whether this Agreement (or a portion of it) is interpreted by a court of competent jurisdiction as a contract or a license. In addition to other relief, it is agreed that temporary and permanent injunctive relief may be an appropriate remedy to prevent any actual or threatened violation of such sections or to enforce such section according to their terms. K. Questions. Questions related to this Agreement may be sent to: EMC Corporation (Attn: EMC Legal), 176 South Street, Hopkinton, MA 01748 USA. -
This looks pretty interesting. It would be a competitor to say Starwind & co?
-
I think I looked at this before. Looks really interesting. And looks easier to manage than gluster or Ceph.
-
@dafyre said in EMC ScaleIO Available for Free:
This looks pretty interesting. It would be a competitor to say Starwind & co?
It cannot be a competitor to us as it is not allowed in production, where we do allow using our Free version in prod.
-
@scottalanmiller said in EMC ScaleIO Available for Free:
Can't be used for production, but you can do a lot of learning on it.
https://www.emc.com/products-solutions/trial-software-download/scaleio.htm
It can't be used for evaluation as well, and THAT is weird to be honest. I simply don't get WHY.
-
@dafyre said in EMC ScaleIO Available for Free:
This looks pretty interesting. It would be a competitor to say Starwind & co?
EMC competitor to StarWind? That's a compliment, Sir you made my day!!! There's a 100x gap in revenue between us so that's great.
Technically positioning is very different: ScaleIO is looking for many-many nodes to get reasonable performance (<10 is a joke) and small deployments are expensive in terms of a data witness. I mean they do have (N-1) capacity so with a 2-way replication with 3 nodes (starter kit) you'll get 1 node (1/3 of a cluster) usable capacity. That's expensive for NVMe storage! Expensive and slow. 2-way replica, no dedupe etc.
My own imho - Ceph is running circles around ScaleIO and as soon as somebody would bother to finalize a healthy ecosystem around Ceph (we need more companies and not just InkTank) ScaleIO will have a VERY strong competitor. Competitor = somebody targeting MASSIVE many nodes deployments (SMB is few nodes, that's where StarWind plays so we aren't competitor really).
-
@scottalanmiller said in EMC ScaleIO Available for Free:
@jason says that the EULA allows for production usage, just without support.
Not really...
https://www.emc.com/content/terms/eula-scaleio.htm
E. “Internal Business Purposes” means an internal (non-commercial) Use for the purpose(s) of testing and demonstrating the features of the Software, and not for Customer product development, product testing, or other Customer research and development or commercial purposes.
-
@KOOLER said in EMC ScaleIO Available for Free:
@scottalanmiller said in EMC ScaleIO Available for Free:
@jason says that the EULA allows for production usage, just without support.
Not really...
https://www.emc.com/content/terms/eula-scaleio.htm
E. “Internal Business Purposes” means an internal (non-commercial) Use for the purpose(s) of testing and demonstrating the features of the Software, and not for Customer product development, product testing, or other Customer research and development or commercial purposes.
Nothing in that says not for production use. But it does say not for commercial purposes and customer development, etc. To me that reads, if I use it internally to run my business, i can.
-
@JaredBusch said in EMC ScaleIO Available for Free:
@KOOLER said in EMC ScaleIO Available for Free:
@scottalanmiller said in EMC ScaleIO Available for Free:
@jason says that the EULA allows for production usage, just without support.
Not really...
https://www.emc.com/content/terms/eula-scaleio.htm
E. “Internal Business Purposes” means an internal (non-commercial) Use for the purpose(s) of testing and demonstrating the features of the Software, and not for Customer product development, product testing, or other Customer research and development or commercial purposes.
Nothing in that says not for production use. But it does say not for commercial purposes and customer development, etc. To me that reads, if I use it internally to run my business, i can.
**E. “Internal Business Purposes” means an internal (non-commercial) Use for the purpose(s) of testing and demonstrating the features of the Software
This is the part that reads not for production use to me. The EULA is explicitly saying for testing and demonstration of the features of the Software. You could skew that to say that by using it in production you are demonstrating the features I guess but that would be a gray area.
-
@JaredBusch said in EMC ScaleIO Available for Free:
@KOOLER said in EMC ScaleIO Available for Free:
@scottalanmiller said in EMC ScaleIO Available for Free:
@jason says that the EULA allows for production usage, just without support.
Not really...
https://www.emc.com/content/terms/eula-scaleio.htm
E. “Internal Business Purposes” means an internal (non-commercial) Use for the purpose(s) of testing and demonstrating the features of the Software, and not for Customer product development, product testing, or other Customer research and development or commercial purposes.
Nothing in that says not for production use. But it does say not for commercial purposes and customer development, etc. To me that reads, if I use it internally to run my business, i can.
To me that means you can't, because anything internal that isn't purely for testing is commercial purposes. Anything used to run a business is commercial use.
-
@JaredBusch said in EMC ScaleIO Available for Free for Non-Production Use:
@KOOLER said in EMC ScaleIO Available for Free:
@scottalanmiller said in EMC ScaleIO Available for Free:
@jason says that the EULA allows for production usage, just without support.
Not really...
https://www.emc.com/content/terms/eula-scaleio.htm
E. “Internal Business Purposes” means an internal (non-commercial) Use for the purpose(s) of testing and demonstrating the features of the Software, and not for Customer product development, product testing, or other Customer research and development or commercial purposes.
Nothing in that says not for production use. But it does say not for commercial purposes and customer development, etc. To me that reads, if I use it internally to run my business, i can.
If the law states you can't kill people it doesn't mean you can kill them with a fork just because fork isn't mentioned.
Production use = Commercial purpose
If you don't agree - go ahead, put SIO into production and be ready to re-write your house to your lawyer. I don't see what I can do to help here
