Swapping Drive To Another RAID Controller
-
It's always a craps shoot when you are messing with arrays. Sure it's suppose to read the config from the drives and ask to import, but who knows. When the card died, whose to say it didn't take the config on the drive out?
-
I came across this... https://www.youtube.com/watch?v=fTx3hzYWg1E
-
Should work fine. The controllers are designed to migrate the configuration in this way.
-
-
@scottalanmiller said:
Should work fine. The controllers are designed to migrate the configuration in this way.
OK, for giggles I will give it a try and see what happens.
-
Worked with no issues. Not even a beep.
Now, I assuming if I had gone with a non-DELL controller, there would have been issues? Or can all cards read the same info on the disk? Is it a standard?
-
One "small" issue I had. (And this might lead to some nice hard drive speed discussion.)
I have 2 7200RPM SATYA drvies in there in a RAID1 array.
On the H310, I ended up with the following speed results:
CrystalDiskMark 5.0.2 x64 (C) 2007-2015 hiyohiyo
Crystal Dew World : http://crystalmark.info/-
MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
-
KB = 1000 bytes, KiB = 1024 bytes
Sequential Read (Q= 32,T= 1) : 184.891 MB/s
Sequential Write (Q= 32,T= 1) : 128.441 MB/s
Random Read 4KiB (Q= 32,T= 1) : 2.441 MB/s [ 595.9 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 1.474 MB/s [ 359.9 IOPS]
Sequential Read (T= 1) : 132.327 MB/s
Sequential Write (T= 1) : 127.913 MB/s
Random Read 4KiB (Q= 1,T= 1) : 0.620 MB/s [ 151.4 IOPS]
Random Write 4KiB (Q= 1,T= 1) : 1.227 MB/s [ 299.6 IOPS]Test : 1024 MiB [C: 11.4% (13.4/116.8 GiB)] (x5) [Interval=5 sec]
Date : 2016/01/05 17:59:43
OS : Windows Server 2012 R2 [6.3 Build 9600] (x64)
When I put the H710 and re-tested, I got the following results:
CrystalDiskMark 5.0.2 x64 (C) 2007-2015 hiyohiyo
Crystal Dew World : http://crystalmark.info/-
MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
-
KB = 1000 bytes, KiB = 1024 bytes
Sequential Read (Q= 32,T= 1) : 126.263 MB/s
Sequential Write (Q= 32,T= 1) : 130.756 MB/s
Random Read 4KiB (Q= 32,T= 1) : 1.459 MB/s [ 356.2 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 1.514 MB/s [ 369.6 IOPS]
Sequential Read (T= 1) : 116.618 MB/s
Sequential Write (T= 1) : 130.008 MB/s
Random Read 4KiB (Q= 1,T= 1) : 0.491 MB/s [ 119.9 IOPS]
Random Write 4KiB (Q= 1,T= 1) : 1.285 MB/s [ 313.7 IOPS]Test : 1024 MiB [C: 43.7% (51.1/116.8 GiB)] (x5) [Interval=5 sec]
Date : 2016/01/07 14:45:47
OS : Windows Server 2012 R2 [6.3 Build 9600] (x64)
QUESTION1: What would a normal speed be for these drives? Is this in the expected range?
QUESTION 2: Does the 184 seem like a fluke here?
-
-
@BRRABill said:
Worked with no issues. Not even a beep.
Now, I assuming if I had gone with a non-DELL controller, there would have been issues? Or can all cards read the same info on the disk? Is it a standard?
I haven't heard of anyone actually trying this, but Dell just uses re-branded LSI controllers. Don't know how much firmware customization they've done, but I'd bet the drives could be moved between Dell and LSI controller cards.
-
@travisdh1 said:
I haven't heard of anyone actually trying this, but Dell just uses re-branded LSI controllers. Don't know how much firmware customization they've done, but I'd bet the drives could be moved between Dell and LSI controller cards.
Yes this surely would go into the "don't try at home" category, I think.
-
@BRRABill said:
@travisdh1 said:
I haven't heard of anyone actually trying this, but Dell just uses re-branded LSI controllers. Don't know how much firmware customization they've done, but I'd bet the drives could be moved between Dell and LSI controller cards.
Yes this surely would go into the "don't try at home" category, I think.
For sure.
-
@BRRABill said:
@travisdh1 said:
I haven't heard of anyone actually trying this, but Dell just uses re-branded LSI controllers. Don't know how much firmware customization they've done, but I'd bet the drives could be moved between Dell and LSI controller cards.
Yes this surely would go into the "don't try at
homework" category, I think.Fixed it for you.
-
@dafyre said:
@BRRABill said:
@travisdh1 said:
I haven't heard of anyone actually trying this, but Dell just uses re-branded LSI controllers. Don't know how much firmware customization they've done, but I'd bet the drives could be moved between Dell and LSI controller cards.
Yes this surely would go into the "don't try at
homework" category, I think.Fixed it for you.
I was about to say... more like "only" try this at home.
-
Oddly enough, when I do the same test on the same drives, on the "E" partition (which is located on the same RAID array as the "C" partition), I get the following results:
Sequential Read (Q= 32,T= 1) : 109.597 MB/s
Sequential Write (Q= 32,T= 1) : 104.111 MB/s
Random Read 4KiB (Q= 32,T= 1) : 1.924 MB/s [ 469.7 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 1.498 MB/s [ 365.7 IOPS]
Sequential Read (T= 1) : 106.960 MB/s
Sequential Write (T= 1) : 105.491 MB/s
Random Read 4KiB (Q= 1,T= 1) : 0.661 MB/s [ 161.4 IOPS]
Random Write 4KiB (Q= 1,T= 1) : 1.243 MB/s [ 303.5 IOPS]Test : 1024 MiB [E: 52.6% (183.0/348.1 GiB)] (x5) [Interval=5 sec]
Date : 2016/01/07 15:51:24
OS : Windows Server 2012 R2 [6.3 Build 9600] (x64) -
Interesting tidbit you may or may not know. (I am sure you do.)
While the H310 DOES support single drives non-RAID), the H710 does NOT. You can use a single drive by creating a single member RAID0 array.
Not that you wouldn't always use RAID in a server. Just thought that was interesting.
-
@BRRABill said:
Interesting tidbit you may or may not know. (I am sure you do.)
While the H310 DOES support single drives non-RAID), the H710 does NOT. You can use a single drive by creating a single member RAID0 array.
Not that you wouldn't always use RAID in a server. Just thought that was interesting.
Good to know with my predilection for software raid, in that specific usage case an H310 will be just fine should I need another HBA.
-
@travisdh1 said:
Good to know with my predilection for software raid, in that specific usage case an H310 will be just fine should I need another HBA.
After being a member here at ML, I have sworn off the H310.
Going to sell mine on eBay rapido!
-
@BRRABill said:
Interesting tidbit you may or may not know. (I am sure you do.)
While the H310 DOES support single drives non-RAID), the H710 does NOT. You can use a single drive by creating a single member RAID0 array.
Not that you wouldn't always use RAID in a server. Just thought that was interesting.
That's actually standard.
-
@BRRABill said:
@travisdh1 said:
Good to know with my predilection for software raid, in that specific usage case an H310 will be just fine should I need another HBA.
After being a member here at ML, I have sworn off the H310.
Going to sell mine on eBay rapido!
It's perfectly good if you don't want any hardware RAID from the controller
-
-
The results on my new EDGE SSD (from xByte) Raid 1 array:
-
MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
-
KB = 1000 bytes, KiB = 1024 bytes
Sequential Read (Q= 32,T= 1) : 1185.227 MB/s
Sequential Write (Q= 32,T= 1) : 488.470 MB/s
Random Read 4KiB (Q= 32,T= 1) : 387.262 MB/s [ 94546.4 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 95.829 MB/s [ 23395.8 IOPS]
Sequential Read (T= 1) : 591.847 MB/s
Sequential Write (T= 1) : 498.278 MB/s
Random Read 4KiB (Q= 1,T= 1) : 28.838 MB/s [ 7040.5 IOPS]
Random Write 4KiB (Q= 1,T= 1) : 42.498 MB/s [ 10375.5 IOPS]Test : 1024 MiB [F: 0.0% (0.1/293.0 GiB)] (x5) [Interval=5 sec]
Date : 2016/01/08 18:22:16
OS : Windows Server 2012 R2 [6.3 Build 9600] (x64)
-
