Hot Swap SSD for HDD in a RAID 1 array
-
Even if you could do this, you wouldn't want to.
You'd be degrading the array to try and rebuild it putting undo stress on the system.
-
@pchiodo Is this a physical DC? Not virtualized? Why on earth would you need the speed of SSD on a physical server using less than 1% of it's capacity?
Sure, you'll speed up reboots, but you shouldn't be needing to reboot more than once a week anyway.
-
Sure, you could. Doesn't mean it's a good idea.
-
For those that don't like this idea - do you also say the same thing about Drobo? They even recommend this process when you need to increase your storage with new drives.
-
@travisdh1 said:
@pchiodo Is this a physical DC? Not virtualized? Why on earth would you need the speed of SSD on a physical server using less than 1% of it's capacity?
Sure, you'll speed up reboots, but you shouldn't be needing to reboot more than once a week anyway.
But I agree - why are you wasting SSDs on a DC? Unless it's doing more than just acting as a DC.
-
@travisdh1 - We have a pretty heavy reliance on the DC, more notably the DNS due to some in house app dependencies. Our performance results from recent DPACK testing showed that this DC would benefit from SSDs vs HDDs.
-
@Dashrender said:
For those that don't like this idea - do you also say the same thing about Drobo? They even recommend this process when you need to increase your storage with new drives.
I guess if the RAID controller knows the difference, then it shouldn't cause any issue. Sounds like they already have good backups, so they're covered even if something goes wrong.
-
@pchiodo said:
@travisdh1 - We have a pretty heavy reliance on the DC, more notably the DNS due to some in house app dependencies. Our performance results from recent DPACK testing showed that this DC would benefit from SSDs vs HDDs.
That suggests that you are short on memory. Both AD itself and DNS should load into memory and never hit the disks except for at boot time. If the databases are staying on disk for reads, then memory is short.
-
Doing the drive swap on a RAID 1 is not too bad since the "stress" will be all on the SSDs, which don't really stress. This isn't a parity array so not really stressing. And since the existing drives are healthy, a single drive copy is not a big deal. No worse than running a backup.
-
@Dashrender said:
For those that don't like this idea - do you also say the same thing about Drobo? They even recommend this process when you need to increase your storage with new drives.
That's extremely different. Doing this like Paul wants to do on a RAID 1 going from Winchesters to SSDs is not a problem. Doing it on a Drobo is horrible. Drobo recommending that process is one of the things we point to as a major problem with their "recommending bad things to look good."
It's no different than how they "recommend" mismatched drives. It kills the performance and lowers reliability. They act like allowing bad practices is a "feature" and ignore that every RAID device ever allowed the same things and it is only good practice that tells people not to do it. Drobo isn't a bad product, but their advice as to how to use their products is based around recommending reckless, crazy behaviour in order to make people who believe that black boxes are magic think that somehow a Drobo is not subject to the same stresses as other RAID arrays. Spoiler alert: it is.
On a Drobo, doing a drive size increase with RAID 5 or RAID 6 is just terrible. I mean really, really terrible. If you have a B800i and wanted to move from 4TB to 6TB drives for example, you are breaking a RAID 6 array (at best, RAID 5 at worst) and doing a 24TB resilver.... eight times!! That's 192TB failure domain using SATA drives. You are looking at likely months of rebuilding, during which you are either on RAID 5 or RAID 0, under extreme stress with the box essentially offline during the process.
-
@scottalanmiller Ditto Synology
-
@MattSpeller said:
@scottalanmiller Ditto Synology
I don't think that they push it in the same way. They say that they can do it, but I've never seen them get all weird about pushing it as a reason to choose them.
-
@scottalanmiller They pimp their SHR raid-5 pretty hard. It and RAID-5 are the default comparison on their site, though you can change it.
-
SHR is fine, it's a virtualization layer on top of the RAID (well, below it technically) same as Drobo. That big is good. It's the pushing people to use mismatched drives, swap them to grow the system and such that Drobo does that is so bad.
-
@MattSpeller said:
@scottalanmiller They pimp their SHR raid-5 pretty hard. It and RAID-5 are the default comparison on their site, though you can change it.
What does @scottalanmiller always preach about taking advice from someone trying to sell you something?
-
@travisdh1 said:
What does @scottalanmiller always preach about taking advice from someone trying to sell you something?
OK I'll take the hit on that one.
But I still think it's OK to do what the OP wanted as a way to move to SSDs.
-
@Dashrender said:
@travisdh1 said:
What does @scottalanmiller always preach about taking advice from someone trying to sell you something?
OK I'll take the hit on that one.
But I still think it's OK to do what the OP wanted as a way to move to SSDs.
Yes, Paul's way of doing it is really not a problem.
-
@scottalanmiller Interesting. It has 4GB at the moment. I certainly could up the memory pretty easily. I have a second DC, so I could just take it down, add more RAM and reboot in about 10 minutes. How much do you think?
Here's the stats:
Disk Throughput 12.00 MB/s Average IO size Read: 40.82 KB / Write: 24.63 KB
IOPS 4 at 95% Average Latency 5 ms Reads and 4 ms writes
Read/Write Ratio 86% / 14% Average Queue Depth 0.11
Total Local Capacity 68.00 GB Peak/Min CPU 10% / 0%
Free Local Capacity 36.00 GB (53%) Peak/Min Memory 2.49 GB / 0.91 GB
Used Local Capacity 32.00 GB (47%) Peak/Min Memory In Use 3.28 GB / 1.70 GB -
@pchiodo Where is the IOPS number, I only see a 4. I think that it got cut off.
-
@scottalanmiller Here is a link to the stats - It's the total read latency that's raised this issue in the first place.
EDIT: So, if it's memory that's causing this in the first place, I should just be able to increase RAM, and not have to swap drives, correct?
