Meraki Rate-Limits Z1 to 50Mbps
-
https://www.reddit.com/r/meraki/comments/41laj8/did_the_z1s_just_get_a_bandwidth_lock_pushed_down/
Looks like they added this in after the fact, which is a bit of a dick move.
-
Glad I never purchased any Meraki equipment. I demoed some then saw the recurring fee and decided against it.
-
That is absolutely ridiculous. Sounds like someone at Ubiquiti is paying Cisco to cripple their gear to teach customers a lesson for having bought from the "big name" vendor.
-
The recurring fee makes them less than desirable for a lot of the SMB.
-
@Minion-Queen said:
The recurring fee makes them less than desirable for a lot of the SMB.
And for the enterprise or anyone who could possibly be a customer.
-
@scottalanmiller said:
That is absolutely ridiculous. Sounds like someone at Ubiquiti is paying Cisco to cripple their gear to teach customers a lesson for having bought from the "big name" vendor.
As if buying and using Cisco gear isn't painful enough lesson already...
-
Not to mention the up front price being a problem too.
-
Plus things like rate limiting and not being able to trust your vendor. Major hurtles.
-
@scottalanmiller I think you mean roadblock.
-
@Minion-Queen said:
The recurring fee makes them less than desirable for a lot of the SMB.
My boss is a Cisco fanatic - even she says the fees are pure extortion.
-
@scottalanmiller said:
That is absolutely ridiculous. Sounds like someone at Ubiquiti is paying Cisco to cripple their gear to teach customers a lesson for having bought from the "big name" vendor.
Where the hell did that come from? Insinuating bad shit on Ubiquiti for Cisco's screw up?
-
@JaredBusch said:
@scottalanmiller said:
That is absolutely ridiculous. Sounds like someone at Ubiquiti is paying Cisco to cripple their gear to teach customers a lesson for having bought from the "big name" vendor.
Where the hell did that come from? Insinuating bad shit on Ubiquiti for Cisco's screw up?
It was sarcasm. That it sounds like Cisco is letting someone intentionally cripple their gear so that their competitors look better. Ubiquiti is the only real competitor here.
-
But you are right, it could just be an outright hatred of customers or internal sabotage or a gamble that their customers are unbelievable suckers.
-
@Nic said:
https://www.reddit.com/r/meraki/comments/41laj8/did_the_z1s_just_get_a_bandwidth_lock_pushed_down/
Looks like they added this in after the fact, which is a bit of a dick move.
This is misrepresented. The Uplink Bandwidth is not a throttle, it's used to do QoS/thortlling on SSIDs that are to Scale (of the overall bandwidth). Likely just something is wrong in the config or there's some other firmware bug.
-
@Jason meraki says it's not a bug - here's there response:
As discussed in our Z1 datasheet (https://meraki.cisco.com/lib/pdf/meraki_datasheet_z1.pdf) the rated throughput for the MX (firewall) is 50Mbps.
Therefore the speeds you are achieving are correct and are within the specifications as outlined in the datasheet.
If you were previously achieving higher speeds and have now seen a drop in performance this may be caused by changes within the new firmware update. However your device is still achieving speeds as specified within the datasheet. -
@Nic said:
@Jason meraki says it's not a bug - here's there response:
As discussed in our Z1 datasheet (https://meraki.cisco.com/lib/pdf/meraki_datasheet_z1.pdf) the rated throughput for the MX (firewall) is 50Mbps.
Therefore the speeds you are achieving are correct and are within the specifications as outlined in the datasheet.
If you were previously achieving higher speeds and have now seen a drop in performance this may be caused by changes within the new firmware update. However your device is still achieving speeds as specified within the datasheet.Actually Cisco has already said they think there is a bug in the dashboard software causing it.
But yeah expecting more than it's rated bandwidth is still on the customer, not Meraki.
-
@Jason you have a link to that newer statement?
-
@brianlittlejohn said:
Glad I never purchased any Meraki equipment. I demoed some then saw the recurring fee and decided against it.
We found the costs to not really much different than paying for smartnet (now totalcare) for our old APs.
-
@Nic said:
@Jason meraki says it's not a bug - here's there response:
As discussed in our Z1 datasheet (https://meraki.cisco.com/lib/pdf/meraki_datasheet_z1.pdf) the rated throughput for the MX (firewall) is 50Mbps.
Therefore the speeds you are achieving are correct and are within the specifications as outlined in the datasheet.
If you were previously achieving higher speeds and have now seen a drop in performance this may be caused by changes within the new firmware update. However your device is still achieving speeds as specified within the datasheet.Sounds like someone forgot to flip a "don't go above rated throughput, if they want more they'll pay more" switch in the firmware until today.
-
It's not unusual, many Cisco routers require a paper licence when you go above certain bandwidth limits on them (mean they are a paper licences not one that's enforced by software, much like CALs, CUBE etc) Many of them are per 100MB for the WAN.
Our palo alto's require more fees for more throughput being used on the same device.
