HyperV Server - Raid Best Practices

DustinB3403

OBR10 would be the better option here. Splitting arrays has never been a great option, and setting up RAID1 for an SSD array so the hypervisor can boot more quickly is ridiculous.

The IOPS performance is needed where the VM's are stored. Not where the Hypervisor is run from.

Option 2.

scottalanmiller

@Jimmy9008 said in HyperV Server - Raid Best Practices:

From those, option 2.

Agreed, option 2 is better. Your workloads get more performance and more capacity.

scottalanmiller

Now I might want to put the hypervisor, DC, and file server onto 4x spinners, and have a RAID 1 SSD pair for the SQL Server. But if you aren't putting the SQL Server onto SSD, then nothing should be on SSD.

DustinB3403

@scottalanmiller said in HyperV Server - Raid Best Practices:

Now I might want to put the hypervisor, DC, and file server onto 4x spinners, and have a RAID 1 SSD pair for the SQL Server. But if you aren't putting the SQL Server onto SSD, then nothing should be on SSD.

Would you tier the storage in this case?

scottalanmiller

@DustinB3403 said in HyperV Server - Raid Best Practices:

@scottalanmiller said in HyperV Server - Raid Best Practices:

Now I might want to put the hypervisor, DC, and file server onto 4x spinners, and have a RAID 1 SSD pair for the SQL Server. But if you aren't putting the SQL Server onto SSD, then nothing should be on SSD.

Would you tier the storage in this case?

Manually, but not with a tiering software package.

Harry Lui

OS on RAID 1 and DATA on RAID 5 is so out dated.

Think about it, why would you want HyperV OS to be fast, but data to be slow? You reboot once every 6 months, so you want that boot up to be super fast, but the data you use every second you want it super slow?

If you have to choose, you'd want the data to be fast, NOT slow.

JaredBusch

@Harry-Lui said in HyperV Server - Raid Best Practices:

OS on RAID 1 and DATA on RAID 5 is so out dated.

Think about it, why would you want HyperV OS to be fast, but data to be slow? You reboot once every 6 months, so you want that boot up to be super fast, but the data you use every second you want it super slow?

If you have to choose, you'd want the data to be fast, NOT slow.

I reboot monthly. Waiting 6 months is silly.

EddieJennings

I'd say Option 2 is the way to go.

For the rest of you, do you typically store both the VHDs and the VM configuration files on the same data partition?

Before I'm FFS'd, I know I've asked this before, but it was in on Telegram. I figured we'd have the discussion chronicled on the forum.

black3dynamite

@EddieJennings said in HyperV Server - Raid Best Practices:

I'd say Option 2 is the way to go.

For the rest of you, do you typically store both the VHDs and the VM configuration files on the same data partition?

Before I'm FFS'd, I know I've asked this before, but it was in on Telegram. I figured we'd have the discussion chronicled on the forum.

Here are the following setup that I've seen.

Virtual Hard Disks:
V:\Hyper-V\Virtual Hard Disks\

Virtual Machines:
V:\Hyper-V\

Virtual Hard Disks:
V:\Hyper-V\

Virtual Machines:
V:\Hyper-V\

And then sometime when creating your VM, the option to Store the virtual machine in a different location is selected too. So the folder has the same name of the VM and all its contents is stored there.

JaredBusch

@EddieJennings said in HyperV Server - Raid Best Practices:

I'd say Option 2 is the way to go.

For the rest of you, do you typically store both the VHDs and the VM configuration files on the same data partition?

Before I'm FFS'd, I know I've asked this before, but it was in on Telegram. I figured we'd have the discussion chronicled on the forum.

Why wouldn't you? Or more to the point, why are you even looking at changing defaults?

Of course the real answer is it depends.

For me the answer is I always "move" them but the form of that move depends on the hypervisor. That is because I almost always install the hypervisor on a sata disk (ssd/spinner/wtfever) connected to the motherboard and not to the RAID controller. So the RAID array is separate.

I do the same with KVM and Hyper-V.
VMWare, I use USB/SD (but been a long time since I used VMWare).

With KVM, I simply mount the RAID array space in the default location. /var/lib/libvirt/images or something like that.

With Hyper-V I update the default because it is now dreive D also it uses a really stupid location, but I still just shorten it from D:\blah\blah\blah\Hyper-V to D:\Hyper-V

Dashrender

@scottalanmiller said in HyperV Server - Raid Best Practices:

Now I might want to put the hypervisor, DC, and file server onto 4x spinners, and have a RAID 1 SSD pair for the SQL Server. But if you aren't putting the SQL Server onto SSD, then nothing should be on SSD.

Man - I keep forgetting about options like this - this could be a great option.

Install Hyper-V on the spinning disks leaving all the storage space of the SSDs for the SQL server - assuming that's enough storage for that job.

Though if you don't need the IOPs for SQL, then the spend might not be worth it to have SSD there, and going with HDDs would be better.

JaredBusch

That said, I don't care where the VM configuration files are. Because they are not important.

Why? Because the backup software/script/process/WTFever backs them up.

Obsolesce

@Joel said in HyperV Server - Raid Best Practices:

Hi guys.
Im drawn between two setup scenarios for a new server:

Option1:
2x 240GB SSD Sata 6GB (for OS)
4X 2TB 12Gb/s (for Data)
I was planning on using Raid1 for the OS and then Raid5/6 for the Data storage

Options2:
6x 2TB Drives in OBR10 for everything and then creating two partiions (1 for OS) and (1 for data).

Is there any better options? What would you do.

Environment will be Windows running. The server (bare metal) will run HyperV Server and the data drive will home 3x VM's (1x SQL, 1x DC and 1x FileServer).

Thoughts welcomed and appreciated.

I'd go with the Option 1 setup with the following changes:

RAID10 the 4x 2tb drives, and partition that for C:OS and D:Data.

RAID1 the SSDs (E:) , and store the database virtual disks on there, and the rest on D:.

JaredBusch

@Obsolesce said in HyperV Server - Raid Best Practices:

@Joel said in HyperV Server - Raid Best Practices:

Hi guys.
Im drawn between two setup scenarios for a new server:

Option1:
2x 240GB SSD Sata 6GB (for OS)
4X 2TB 12Gb/s (for Data)
I was planning on using Raid1 for the OS and then Raid5/6 for the Data storage

Options2:
6x 2TB Drives in OBR10 for everything and then creating two partiions (1 for OS) and (1 for data).

Is there any better options? What would you do.

Environment will be Windows running. The server (bare metal) will run HyperV Server and the data drive will home 3x VM's (1x SQL, 1x DC and 1x FileServer).

Thoughts welcomed and appreciated.

I'd go with the Option 1 setup with the following changes:

RAID10 the 4x 2tb drives, and partition that for C:OS and D:Data.

RAID1 the SSDs (E:) , and store the database virtual disks on there, and the rest on D:.

Using SSD for most SMB database needs are overkill. They run perfectly fine on R10 spinners.

PhlipElder

If the server has eight 2.5" bays then fill them with 10K SAS in RAID 6.

8x 10K SAS in RAID 6 sustains 800MiB/Second throughput and 250 IOPS to 450 IOPS per disk depending on the storage stack format.

Set up two logical disks:
1: 75GB for the host OS
2: Balance for virtual machines.

Use FIXED VHDX for the VM OS VHDX files and same for 250GB or less data VHDX files.

Then, use one DYNAMIC VHDX for the file server's data to expand with. This setup would limit the performance degradation that would otherwise happen over time due to fragmentation. It also allows for better disaster recovery options as moving around a 1TB VHDX with only 250GB in it would be painful.

If there's a need for more performance then go with at least four Intel SSD D3-4610 series SATA in RAID 5 (more risky) or five in RAID 6 (less risky). We'd go for eight smaller SSDs versus five larger ones for more performance using the above formula.

Blog Post: Disaster Preparedness: KVM/IP + USB Flash = Recovery. Here's a Guide

scottalanmiller

@JaredBusch said in HyperV Server - Raid Best Practices:

@Obsolesce said in HyperV Server - Raid Best Practices:

@Joel said in HyperV Server - Raid Best Practices:

Hi guys.
Im drawn between two setup scenarios for a new server:

Option1:
2x 240GB SSD Sata 6GB (for OS)
4X 2TB 12Gb/s (for Data)
I was planning on using Raid1 for the OS and then Raid5/6 for the Data storage

Options2:
6x 2TB Drives in OBR10 for everything and then creating two partiions (1 for OS) and (1 for data).

Is there any better options? What would you do.

Environment will be Windows running. The server (bare metal) will run HyperV Server and the data drive will home 3x VM's (1x SQL, 1x DC and 1x FileServer).

Thoughts welcomed and appreciated.

I'd go with the Option 1 setup with the following changes:

RAID10 the 4x 2tb drives, and partition that for C:OS and D:Data.

RAID1 the SSDs (E:) , and store the database virtual disks on there, and the rest on D:.

Using SSD for most SMB database needs are overkill. They run perfectly fine on R10 spinners.

Having 6x drives is probably overkill, too.

In reality, maybe just two SSDs in RAID 1 is all that is needed.

PhlipElder

We have one of our boxes (R2208GZ4GC) that's being used as a platform for a client recovery.

It's set up with:
2x 240GB Intel SSD DC S4500 RAID 1 for host OS
2x 1.9TB Intel SSD D3-S4610 RAID 1 for VMs

It's working great for the seven or eight VMs currently stood up on it. RAID is provided by Intel RMS25CB080 (IIRC) series module.

DustinB3403

@PhlipElder said in HyperV Server - Raid Best Practices:

We have one of our boxes (R2208GZ4GC) that's being used as a platform for a client recovery.

It's set up with:
2x 240GB Intel SSD DC S4500 RAID 1 for host OS
2x 1.9TB Intel SSD D3-S4610 RAID 1 for VMs

It's working great for the seven or eight VMs currently stood up on it. RAID is provided by Intel RMS25CB080 (IIRC) series module.

What you have is wasted SSD performance and cost and storage capacity.

PhlipElder

@DustinB3403 said in HyperV Server - Raid Best Practices:

@PhlipElder said in HyperV Server - Raid Best Practices:

We have one of our boxes (R2208GZ4GC) that's being used as a platform for a client recovery.

It's set up with:
2x 240GB Intel SSD DC S4500 RAID 1 for host OS
2x 1.9TB Intel SSD D3-S4610 RAID 1 for VMs

It's working great for the seven or eight VMs currently stood up on it. RAID is provided by Intel RMS25CB080 (IIRC) series module.

What you have is wasted SSD performance and cost and storage capacity.

The performance pays for itself when they are in full swing with very little to no noticeable latency. And, updates run a lot faster.

Cost wise, it's not that much of a step.

Dashrender

@scottalanmiller said in HyperV Server - Raid Best Practices:

@JaredBusch said in HyperV Server - Raid Best Practices:

@Obsolesce said in HyperV Server - Raid Best Practices:

@Joel said in HyperV Server - Raid Best Practices:

Hi guys.
Im drawn between two setup scenarios for a new server:

Option1:
2x 240GB SSD Sata 6GB (for OS)
4X 2TB 12Gb/s (for Data)
I was planning on using Raid1 for the OS and then Raid5/6 for the Data storage

Options2:
6x 2TB Drives in OBR10 for everything and then creating two partiions (1 for OS) and (1 for data).

Is there any better options? What would you do.

Environment will be Windows running. The server (bare metal) will run HyperV Server and the data drive will home 3x VM's (1x SQL, 1x DC and 1x FileServer).

Thoughts welcomed and appreciated.

I'd go with the Option 1 setup with the following changes:

RAID10 the 4x 2tb drives, and partition that for C:OS and D:Data.

RAID1 the SSDs (E:) , and store the database virtual disks on there, and the rest on D:.

Using SSD for most SMB database needs are overkill. They run perfectly fine on R10 spinners.

Having 6x drives is probably overkill, too.

In reality, maybe just two SSDs in RAID 1 is all that is needed.

Well - other than shear volume of storage.