Network setup - Hyper-V
-
@tim_g said in Network setup - Hyper-V:
@jaredbusch said in Network setup - Hyper-V:
@tim_g said in Network setup - Hyper-V:
HyperV VMQ setting doesn't matter with 1g NICs.
This is provably false. You have said it repeatedly.
Yet I have posted clear proof in the previously linked thread.
I know for a fact it doesn't matter with 1G NICs.
You are talking about the setting in the NIC properties. I'm not. I'm talking about the setting in the HyperV VM Settings.
That's different.
-
Even if it doesn't matter. I have run the powershell command and it's still running slow. Any other ideas?
-
@ccwtech said in Network setup - Hyper-V:
Even if it doesn't matter. I have run the powershell command and it's still running slow. Any other ideas?
Is it slow accessing the application via IP and DNS?
-
The way the app is installed is that essentially all the server is doing is hosting a file share. You place a shortcut to the .exe file on the desktop.
-
@ccwtech said in Network setup - Hyper-V:
The way the app is installed is that essentially all the server is doing is hosting a file share. You place a shortcut to the .exe file on the desktop.
Is the shortcut path and target starts with
\\ip-address\... or \\dns\...? -
Got it! I have tried both. No noticeable change.
-
@ccwtech said in Network setup - Hyper-V:
Got it! I have tried both. No noticeable change.
Tried disabling antivirus and maybe firewall on the workstation that is accessing the application?
-
@black3dynamite I should have by now, but no. Let me give that a shot.
-
@ccwtech said in Network setup - Hyper-V:
@black3dynamite I should have by now, but no. Let me give that a shot.
I would then try accessing via IP and DNS to confirm if that helps too.
-
@ccwtech said in Network setup - Hyper-V:
The way the app is installed is that essentially all the server is doing is hosting a file share. You place a shortcut to the .exe file on the desktop.
can you elaborate this bit. where the application files reside?! when you say access app via netwrok are you talking about a client server topology or are you doing something more exotic?!
-
Files are on a server (Hyper-V in this case). Quite literally on each desktop you navigate to the UNC path and do a right click on the main exe and choose send to desktop.
It seems fast when they are closed, but slow when they are open (and everyone is using it). They only have 9 PC's however. The server is way above min and even recommended spec's for the software.
Their network switch is a Netgear GS748Tv5 and I upgraded the FW to the latest version.
-
@ccwtech Is it the initial launch of the application that is slow or the navigation within the application? I assume this behavior happens on every computer? Are they all hardwired or wireless? Can you run an extended ping (ping -t) to the application server from a computer having the issues and make note what the response times are after hours vs. during hours. If you attempt to copy some files from the same UNC path the main exe is at to a temp folder on the local pc, what kind of file transfer speeds are you seeing?
-
Turning off firewalls and AV had no impact.
Initial launch and the app while in use is slow.
All PC's are impacted. All are hardwired 1 Gig cards and switches. Replaced all switches except the main switch
A ping -t shows <1 ms day or night
Transfer speed of a folder with files (about 300 Meg) is about 20 MB/s
I appreciate everyone's help here. It sucks when you set up a brand new server for a client and they want their 10 year old server back.
-
@ccwtech said in Network setup - Hyper-V:
I appreciate everyone's help here. It sucks when you set up a brand new server for a client and they want their 10 year old server back.
What OS was on the old server vs the new one? Wondering if it may be an SMB issue if they are going over a UNC path?
-
Going from 2008 R2 Standard to Server 2016 Standard
-
20 MB/s seems horrible to me. My home network is much faster than that.
-
@ccwtech said in Network setup - Hyper-V:
Going from 2008 R2 Standard to Server 2016 Standard
Hmmmm.. Are the workstations W7 or W10? Wondering if using different SMB versions may be an issue as well. I only mention this because I had a network issue a long time ago when I went from 2003 to 2008R2 and SMB was an issue until everyone was on W7 from XP.
Edit: - Also, are there any errors in the Event Viewer when copying large files or starting the app from a desktop?
-
Mixture of 7 and 10.
I should have tried this earlier, but I tried the application on my other VM (the domain controller - same physical box) and it's slow there as well. It's also slow on the physical box.
At least that eliminates a ton, but still doesn't tell me why it would be fast on the other VM itself.
-
I was thinking that my last post may be very critical in solving this issue. Any ideas to help?
-
Just trying to get your setup correct, Multiple 2016 VM's on one 2016 Hyper-V host. 1 RDS, 1 FS and 1 DC?
Is app installed on RDS or FS server?
