Datto AP60
-
@Dashrender said in Datto AP60:
at which point I pickup the phone and call the sales number on the website, while at the same time posting - OK it says it's a cloud controller based thing - what is that? (oh and I'm calling sales to get some info).
You called, or are you speaking as @WrCombs?
-
@JasGot said in Datto AP60:
If I had the answer, I'd gladly give it to him with any BS attached.
That's just it*, this Datta AP60 is something of a unicorn that most people probably have never heard of, so the answer, google it and find out is as valid as anything else.
I think @dbeato is the only person on this thread who's said he's dealt with these. For this community that's a boon for soon.
But that doesn't address the real question that @WrCombs is asking, which still hasn't been clarified.
@WrCombs said in Datto AP60:
Wondering what i'm getting myself into.
To which the vast majority of this community would have to go and do the very same thing that was originally recommended. Look it up, if there was a specific question on how to setup an SSID on these someone with experience could create a guide - like @JaredBusch did with the Ubiquiti controller guide.
-
@dbeato said in Datto AP60:
@JaredBusch said in Datto AP60:
@dbeato said in Datto AP60:
@JaredBusch said in Datto AP60:
@dbeato said in Datto AP60:
To answer the question that @WrCombs was asking. THe first step I need to know if this Access Point was purchased by your boss through a Partner or Directly (Which is rarely the case). The Datto Access Points (AP) are managed through the Cloud Portal of the MSP that usually manages them.
The AP60 is not the latest and should be on AP62 now.
That does not sound promising. Do these units work if they cannot reach the controller?
Without the controller the device cannot be managed as there is no interface to manage standalone.
....
That was not the question
@JaredBusch said in Datto AP60:
@dbeato said in Datto AP60:
@JaredBusch said in Datto AP60:
@dbeato said in Datto AP60:
To answer the question that @WrCombs was asking. THe first step I need to know if this Access Point was purchased by your boss through a Partner or Directly (Which is rarely the case). The Datto Access Points (AP) are managed through the Cloud Portal of the MSP that usually manages them.
The AP60 is not the latest and should be on AP62 now.
That does not sound promising. Do these units work if they cannot reach the controller?
Without the controller the device cannot be managed as there is no interface to manage standalone.
....
That was not the question
You probably edited your post after me since I quoted only what you posted. But I will answer it shortly.
So to answer the question finally, I know if you have it already configured it will continue to work just not controllable after the cloud controller stops.
-
@DustinB3403 said in Datto AP60:
@Dashrender said in Datto AP60:
at which point I pickup the phone and call the sales number on the website, while at the same time posting - OK it says it's a cloud controller based thing - what is that? (oh and I'm calling sales to get some info).
You called, or are you speaking as @WrCombs?
I'm saying that is the process I would have followed if I were @WrCombs
-
@Dashrender said in Datto AP60:
@DustinB3403 said in Datto AP60:
@Dashrender said in Datto AP60:
at which point I pickup the phone and call the sales number on the website, while at the same time posting - OK it says it's a cloud controller based thing - what is that? (oh and I'm calling sales to get some info).
You called, or are you speaking as @WrCombs?
I'm saying that is the process I would have followed if I were @WrCombs
That's what I thought you meant, but I'm in a bit of a fog this morning.
-
@Dashrender said in Datto AP60:
@JasGot said in Datto AP60:
Yeah - he was cheating - asking to see if someone else had experience and could just point him in the right direction...
I don't agree with this for one second. Asking questions and bouncing ideas off one another is what we're all her for. Or, at least it should be. Besides, how the hell is that cheating? Is ML some kind of online university no one told me about? You may have real experience, and you may think you are adults, but you all still act like 7th graders.
You have no idea what time constraints or work load he is dealing with at this moment. We all know, as well as @WrCombs, how to go figure all of this out on our own. Sometimes that is just stupid. A quick answer or being pointed in the right direction may be just what he needed to resolve this problem quickly and efficiently. If I had the answer, I'd gladly give it to him with any BS attached.
Certainly the shit you all have strewn about today has been a complete waste of time, especially yours.
And the constant insisting that people tell their boss to f*ck themselves every time they need something that is beneath you is no way to make a living.
If all of you pulled that shit as often as you tell other people to, you'd all be out of work. And if you say it ain't so, I'll call BS.
Just think what better lives you'd have if you kept quiet when you didn't have anything useful or positive to say. I honestly don't know where you all find the energy to be such jerks all the time.
that was my quote - and I'll take the hit. it might have been a bit harsh - but using the piece of equipment was a thing put forth by his boss (now eventually @WrCombs told us the boss said he could take or leave this AP) so that pretty much means it's on him to learn what is needed to make it work. I don't mind the asking of the question - as long as it's followed up by his own Googling - as I quickly did upon seeing his post and quickly found out that it's a cloud controller based setup - and even posted as much comparing it to Meraki. Now @WrCombs lack of experience, exposure means he might not be familiar with Meraki, so he might not have been able to draw the same conclusion - and might have simply been lost as to what a cloud controller even was - at which point I pickup the phone and call the sales number on the website, while at the same time posting - OK it says it's a cloud controller based thing - what is that? (oh and I'm calling sales to get some info).
This brings up an interesting point... bringing in the Datto AP, something anyone familiar with it would have known wasn't going to be a viable solution because of the MSP issue... might have been an attempt to sabotage @WrCombs to make him struggle trying to figure that out rather than providing him with a solution. So that it would appear like his fault that he couldn't do the job rather than his boss' failure to provide the tools. If anyone asked the boss would have said an AP was provided, but that @WrCombs couldn't do the job. Now that he knows that the boss didn't bring a working AP at all he can protect against this.
-
@Dashrender said in Datto AP60:
@dbeato said in Datto AP60:
@dbeato said in Datto AP60:
@JaredBusch said in Datto AP60:
@dbeato said in Datto AP60:
@JaredBusch said in Datto AP60:
@dbeato said in Datto AP60:
To answer the question that @WrCombs was asking. THe first step I need to know if this Access Point was purchased by your boss through a Partner or Directly (Which is rarely the case). The Datto Access Points (AP) are managed through the Cloud Portal of the MSP that usually manages them.
The AP60 is not the latest and should be on AP62 now.
That does not sound promising. Do these units work if they cannot reach the controller?
Without the controller the device cannot be managed as there is no interface to manage standalone.
....
That was not the question
@JaredBusch said in Datto AP60:
@dbeato said in Datto AP60:
@JaredBusch said in Datto AP60:
@dbeato said in Datto AP60:
To answer the question that @WrCombs was asking. THe first step I need to know if this Access Point was purchased by your boss through a Partner or Directly (Which is rarely the case). The Datto Access Points (AP) are managed through the Cloud Portal of the MSP that usually manages them.
The AP60 is not the latest and should be on AP62 now.
That does not sound promising. Do these units work if they cannot reach the controller?
Without the controller the device cannot be managed as there is no interface to manage standalone.
....
That was not the question
You probably edited your post after me since I quoted only what you posted. But I will answer it shortly.
So to answer the question finally, I know if you have it already configured it will continue to work just not controllable after the cloud controller stops.
I wonder if his boss received an MSP account so they could try this device... just like Meraki gave away free APs and free accounts for 3 years trying to hook people onto their platform. It was a good ploy.
I bet that they are expected to call the MSP to get things done. And that this was long ago. Just like the free Merakis... they time out if you don't keep paying (is my guess.)
-
@scottalanmiller said in Datto AP60:
@Dashrender said in Datto AP60:
@dbeato said in Datto AP60:
@dbeato said in Datto AP60:
@JaredBusch said in Datto AP60:
@dbeato said in Datto AP60:
@JaredBusch said in Datto AP60:
@dbeato said in Datto AP60:
To answer the question that @WrCombs was asking. THe first step I need to know if this Access Point was purchased by your boss through a Partner or Directly (Which is rarely the case). The Datto Access Points (AP) are managed through the Cloud Portal of the MSP that usually manages them.
The AP60 is not the latest and should be on AP62 now.
That does not sound promising. Do these units work if they cannot reach the controller?
Without the controller the device cannot be managed as there is no interface to manage standalone.
....
That was not the question
@JaredBusch said in Datto AP60:
@dbeato said in Datto AP60:
@JaredBusch said in Datto AP60:
@dbeato said in Datto AP60:
To answer the question that @WrCombs was asking. THe first step I need to know if this Access Point was purchased by your boss through a Partner or Directly (Which is rarely the case). The Datto Access Points (AP) are managed through the Cloud Portal of the MSP that usually manages them.
The AP60 is not the latest and should be on AP62 now.
That does not sound promising. Do these units work if they cannot reach the controller?
Without the controller the device cannot be managed as there is no interface to manage standalone.
....
That was not the question
You probably edited your post after me since I quoted only what you posted. But I will answer it shortly.
So to answer the question finally, I know if you have it already configured it will continue to work just not controllable after the cloud controller stops.
I wonder if his boss received an MSP account so they could try this device... just like Meraki gave away free APs and free accounts for 3 years trying to hook people onto their platform. It was a good ploy.
I bet that they are expected to call the MSP to get things done. And that this was long ago. Just like the free Merakis... they time out if you don't keep paying (is my guess.)
His company is the MSP - the clients are the restaurants. I'm guessing his boss got this free unit as a way to get the company to start using them... no different from Meraki.
Of course, they are basically useless in this setup, because the APs are on a non internet connected network.
-
@Dashrender said in Datto AP60:
No job should ever expect you to perform a job that they don't give you the tools for, unless the job stated you had to provide such tools as part of the hiring process.
And outlined what those tools were, or cost thereof. Otherwise the job can easily start treating you like a parts supplier. It's an AP today. Maybe a switch tomorrow. Eventually, maybe a desktop, or a server. First a car, then a pickup, eventually a box truck and a CDL.
There is a big gap between an employer who puts it on you to pay for their mistakes and treats you like dirt and an employer that treats you well, provides what is needed and you want to go the extra mile for because you can. There is a difference between being emotionally tricked into feeling responsible for someone else's failures, and volunteering to be a hero and go the extra mile.
-
@scottalanmiller said in Datto AP60:
@dbeato said in Datto AP60:
@scottalanmiller said in Datto AP60:
@DustinB3403 said in Datto AP60:
@scottalanmiller said in Datto AP60:
We replace them with UBNT because they are better, not because they are less.
You absolutely have to be replacing this not only because Ubiquiti offers a better product, but because the TCO is way cheaper than the cost of Meraki's gear as well.
Actually, that pretty much never happens. That they are cheaper makes customers jump at it, but typically we replace the Merakis because of a failing that the UBNT fixes.
What failing? And the problem is not Meraki or Ubiquiti here. However when it comes to so called security experts they talk about Security Controls on APs which is very interesting and they leave out Ubiquiti because they don't have any.
Lack of features or flexibility, generally. Or that configuration costs, rather than unit costs, are so much higher that while it might be a cost factor, isn't a cost of the device factor.
I see, so bottom line factors.
-
@WrCombs said in Datto AP60:
@dbeato - What would it take to get creds for the management interface?
You need to be a Datto partner or find one like me.
-
@dbeato said in Datto AP60:
@WrCombs said in Datto AP60:
@dbeato - What would it take to get creds for the management interface?
You need to be a Datto partner or find one like me.
Can you seize control of other MSPs' gear?
-
Thread is open.
-
Not sure if there are still questions re: the device but I've run a few sites using these or related devices for quite a while. APs were purchased as OpenMesh prior to the Datto takeover. Most that we were using were an earlier model but the cloud controller has remained quite similar through the whole process.
They've been reliable and are easy to work with.
Have experienced a few occasions where internet access went down and they stopped providing network access until the connection to the cloud controller was reestablished. Haven't experienced the situation in some time though so unsure if it is still a thing.
-
@NDC said in Datto AP60:
Have experienced a few occasions where internet access went down and they stopped providing network access until the connection to the cloud controller was reestablished.
That could be an issue here, he plans to use them in a disconnected mode.
-
@scottalanmiller said in Datto AP60:
@NDC said in Datto AP60:
Have experienced a few occasions where internet access went down and they stopped providing network access until the connection to the cloud controller was reestablished.
That could be an issue here, he plans to use them in a disconnected mode.
Yep, I thought I saw that in a related thread, it's why I mentioned it.
-
@Dashrender said in Datto AP60:
@WrCombs said in Datto AP60:
@scottalanmiller said in Datto AP60:
@WrCombs said in Datto AP60:
But I'm running out of time and options here...
Just to be clear, she's running out of time and options. You are unaffected.
Sure ; IF that's how you see it.
I see it as MY install; im the Account Manager on this one and taking the lead so im the one stressing.This, this is the hardest aspect of this job that I've had to get over. Sure, it's your project, but you don't have a company CC - you don't have ordering rights/purchasing rights (Or do you?)
No job should ever expect you to perform a job that they don't give you the tools for, unless the job stated you had to provide such tools as part of the hiring process.
For example - if you having cell phone they can call you on is required for the job - either a) they provide it/pay for it - or B) tell you when you take the job of this requirement so you can decide if that is an acceptable part of the job requirements.
This is no different than wearing clothes to work - They tell you what type of clothes you must wear, but generally don't provide you those clothes, or even pay you so you can acquire them (well, not directly).
But, I assume they did say - to get this job you need to have reliable transportation, and we (the company) will reimburse you for driving your own vehicle based on mileage.
It's no different in your AP situation. You were told pre-hire that you had to provide networking equipment, so why should you? You still have 3 weeks before this install - assuming you can't get this 'free' AP working by noon - I'd go to her and say - Hey, I can't get this to work, I need to order an $90 UAP so I can pre-stage these tablets for this client - oh, and we'll have it here for the next install as well, etc.
If she says no - then say - OK, no problem, but I'll need a few more hours onsite at the client site to setup the tablets, once I get their WIFI network setup.
Frankly - from a time spent POV, there shouldn't really be much of a difference, it will likely take you the same amount of time - just in one case the client is watching you, and in the other, they are not.
I assume this project was sold as a flat rate project - so it's not like there could be more or less billing...Well said.
-
@Dashrender said in Datto AP60:
His company is the MSP
No he isn't. The only "MSP" being discussed is the MSP that sells Datto shit.
-
@Dashrender said in Datto AP60:
Of course, they are basically useless in this setup, because the APs are on a non internet connected network.
No, they are not. @dbeato has clearly stated it works offline once programmed. Yes @NDC mentioned a rare condition where it failed.
None of that matters. This unit is not going out to the restaraunt. He only needs the fucking thing to configure the tablets in the office. The restaurant will be providing s the wifi for the production closed network.
-
@JaredBusch said in Datto AP60:
@Dashrender said in Datto AP60:
Of course, they are basically useless in this setup, because the APs are on a non internet connected network.
No, they are not. @dbeato has clearly stated it works offline once programmed. Yes @NDC mentioned a rare condition where it failed.
None of that matters. This unit is not going out to the restaraunt. He only needs the fucking thing to configure the tablets in the office. The restaurant will be providing s the wifi for the production closed network.
this
