Errors Updating NextCloud

@scottalanmiller said in Errors Updating NextCloud:

@black3dynamite said in Errors Updating NextCloud:

setsebool -P httpd_unified on

Even if I turn SELinux off to test completely, its' the same.

I have to wait until the update is available for me to confirm it if I get that error.

I took it out of maintenance mode so that I could try again, and the update is no longer available.

JaredBusch

@black3dynamite said in Errors Updating NextCloud:

Enable setsebool -P httpd_unified on to update from gui and then disable setsebool -P httpd_unified off

I never have this problem, I assume, because I turn off SELinux for the update. I do that instead of giving all the directories and shit HTTP_RW perms.

scottalanmiller

@jaredbusch said in Errors Updating NextCloud:

@black3dynamite said in Errors Updating NextCloud:

Enable setsebool -P httpd_unified on to update from gui and then disable setsebool -P httpd_unified off

I never have this problem, I assume, because I turn off SELinux for the update. I do that instead of giving all the directories and shit HTTP_RW perms.

I tried that, still got the error. I normally keep it on, though, so it might be part of my historical issues.

black3dynamite

Updating to 13.0.4 was a success.

scottalanmiller

Now with 13.0.4...

0_1528734680250_Screenshot from 2018-06-11 11-30-24.png

black3dynamite

@scottalanmiller said in Errors Updating NextCloud:

Now with 13.0.4...

Do you have any of these setup in your nginx conf for nextcloud?

proxy_connect_timeout 
proxy_send_timeout
proxy_read_timeout
send_timeout

NerdyDad

Went from 13.0.2 to 13.0.4 on Vultr and had no problems at all.

bnrstnr

@scottalanmiller said in Errors Updating NextCloud:

Now with 13.0.4...

I got this on one of my instances, too. Took it out of maintenance mode with the CLI and then continued the update via the web interface and it finished without any further issues.

scottalanmiller

@bnrstnr said in Errors Updating NextCloud:

@scottalanmiller said in Errors Updating NextCloud:

Now with 13.0.4...

I got this on one of my instances, too. Took it out of maintenance mode with the CLI and then continued the update via the web interface and it finished without any further issues.

Yeah, that's what I normally do. But... why is that always necessarily, like almost every time.

scottalanmiller

Update done, just had to run it a couple of times.

zachary715

I just ran into an error updating from 13.0.2 to 13.0.4. When trying to update via CLI I would get the following message...

[root@nextcloud updater]# sudo -u apache php updater.phar
Nextcloud Updater - version: v13.0.0beta1

Current version is 13.0.2.
PHP Fatal error:  Uncaught Error: Call to undefined function NC\Updater\json_encode() in phar:///var/www/html/nextcloud/updater/updater.phar/lib/Updater.php:453
Stack trace:
#0 phar:///var/www/html/nextcloud/updater/updater.phar/lib/Updater.php(118): NC\Updater\Updater->getUpdateServerResponse()
#1 phar:///var/www/html/nextcloud/updater/updater.phar/lib/UpdateCommand.php(142): NC\Updater\Updater->checkForUpdate()
#2 phar:///var/www/html/nextcloud/updater/updater.phar/vendor/symfony/console/Command/Command.php(256): NC\Updater\UpdateCommand->execute(Object(Symfony\Component\Console\Input\ArgvInput), Object(Symfony\Component\Console\Output\ConsoleOutput))
#3 phar:///var/www/html/nextcloud/updater/updater.phar/vendor/symfony/console/Application.php(820): Symfony\Component\Console\Command\Command->run(Object(Symfony\Component\Console\Input\ArgvInput), Object(Symfony\Component\Console\Output\ConsoleOutput))
#4 phar:///var/www/html/nextcloud/updater/updater.phar/vendor/symfony/console/Application.php(187): Symfony\Component\Console\ in phar:///var/www/html/nextcloud/updater/updater.phar/lib/Updater.php on line 453

Some Googling led me to potential issues with lack of json module for php. Figured I'd give it a shot so I installed dnf install php-json and re-ran the update. Worked like a charm.

I usually have initiated the update from the Web GUI in the past, but was on my phone at home last night and thought I'd give the CLI a go since I too have issues with the web update from time to time.

JaredBusch

@zachary715 said in Errors Updating NextCloud:

I just ran into an error updating from 13.0.2 to 13.0.4. When trying to update via CLI I would get the following message...

[root@nextcloud updater]# sudo -u apache php updater.phar
Nextcloud Updater - version: v13.0.0beta1

Current version is 13.0.2.
PHP Fatal error:  Uncaught Error: Call to undefined function NC\Updater\json_encode() in phar:///var/www/html/nextcloud/updater/updater.phar/lib/Updater.php:453
Stack trace:
#0 phar:///var/www/html/nextcloud/updater/updater.phar/lib/Updater.php(118): NC\Updater\Updater->getUpdateServerResponse()
#1 phar:///var/www/html/nextcloud/updater/updater.phar/lib/UpdateCommand.php(142): NC\Updater\Updater->checkForUpdate()
#2 phar:///var/www/html/nextcloud/updater/updater.phar/vendor/symfony/console/Command/Command.php(256): NC\Updater\UpdateCommand->execute(Object(Symfony\Component\Console\Input\ArgvInput), Object(Symfony\Component\Console\Output\ConsoleOutput))
#3 phar:///var/www/html/nextcloud/updater/updater.phar/vendor/symfony/console/Application.php(820): Symfony\Component\Console\Command\Command->run(Object(Symfony\Component\Console\Input\ArgvInput), Object(Symfony\Component\Console\Output\ConsoleOutput))
#4 phar:///var/www/html/nextcloud/updater/updater.phar/vendor/symfony/console/Application.php(187): Symfony\Component\Console\ in phar:///var/www/html/nextcloud/updater/updater.phar/lib/Updater.php on line 453

Some Googling led me to potential issues with lack of json module for php. Figured I'd give it a shot so I installed dnf install php-json and re-ran the update. Worked like a charm.

I usually have initiated the update from the Web GUI in the past, but was on my phone at home last night and thought I'd give the CLI a go since I too have issues with the web update from time to time.

Might be a new dependency to account for. I have not ran a new in stall in a couple years.

zachary715

@jaredbusch said in Errors Updating NextCloud:

@zachary715 said in Errors Updating NextCloud:
I just ran into an error updating from 13.0.2 to 13.0.4. When trying to update via CLI I would get the following message...
[root@nextcloud updater]# sudo -u apache php updater.phar
Nextcloud Updater - version: v13.0.0beta1

Current version is 13.0.2.
PHP Fatal error:  Uncaught Error: Call to undefined function NC\Updater\json_encode() in phar:///var/www/html/nextcloud/updater/updater.phar/lib/Updater.php:453
Stack trace:
#0 phar:///var/www/html/nextcloud/updater/updater.phar/lib/Updater.php(118): NC\Updater\Updater->getUpdateServerResponse()
#1 phar:///var/www/html/nextcloud/updater/updater.phar/lib/UpdateCommand.php(142): NC\Updater\Updater->checkForUpdate()
#2 phar:///var/www/html/nextcloud/updater/updater.phar/vendor/symfony/console/Command/Command.php(256): NC\Updater\UpdateCommand->execute(Object(Symfony\Component\Console\Input\ArgvInput), Object(Symfony\Component\Console\Output\ConsoleOutput))
#3 phar:///var/www/html/nextcloud/updater/updater.phar/vendor/symfony/console/Application.php(820): Symfony\Component\Console\Command\Command->run(Object(Symfony\Component\Console\Input\ArgvInput), Object(Symfony\Component\Console\Output\ConsoleOutput))
#4 phar:///var/www/html/nextcloud/updater/updater.phar/vendor/symfony/console/Application.php(187): Symfony\Component\Console\ in phar:///var/www/html/nextcloud/updater/updater.phar/lib/Updater.php on line 453
Some Googling led me to potential issues with lack of json module for php. Figured I'd give it a shot so I installed dnf install php-json and re-ran the update. Worked like a charm.

I usually have initiated the update from the Web GUI in the past, but was on my phone at home last night and thought I'd give the CLI a go since I too have issues with the web update from time to time.
Might be a new dependency to account for. I have not ran a new in stall in a couple years.

This was originally a Nextcloud 12 install on Fedora 27. Have upgraded to versions 13 and 28 respectively. Upgrades up to this point have not required this module.

Be curious for others who are running latest Nextcloud on Fedora 28, if you run php -m if the php-json module is installed or if you were able to upgrade to the latest without it. @scottalanmiller @NerdyDad @bnrstnr @black3dynamite

I didn't find any searches related to Nextcloud for this error but if I searched for the PHP Fatal error with json_encode() that's what led me to the result.