ZTE Shows Off Immersion Server Liquid Cooling at MWC
-
@momurda said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
Also seems it would be a huge pain in the ass to replace a failed component like a stick of RAM. I imagine the need for changing RAM happens in Datacenters.
Shouldn't be bad. How do you replace RAM normally? Power off the machine, pull it from the rack, replace RAM, power on.
Same here.
-
@scottalanmiller said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
@momurda said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
Also seems it would be a huge pain in the ass to replace a failed component like a stick of RAM. I imagine the need for changing RAM happens in Datacenters.
Shouldn't be bad. How do you replace RAM normally? Power off the machine, pull it from the rack, replace RAM, power on.
Same here.
The question becomes how do you handle the dust particles and such in the air that cling to said ram chip, as @DustinB3403 mentioned.
-
Could easily have a filtration system.
-
@scottalanmiller said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
Could easily have a filtration system.
If you have the money to invest in a liquid immersion cooled system you had better have a filter system... and a nice clean room with positive air pressure.
-
@scottalanmiller said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
@momurda said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
Also seems it would be a huge pain in the ass to replace a failed component like a stick of RAM. I imagine the need for changing RAM happens in Datacenters.
Shouldn't be bad. How do you replace RAM normally? Power off the machine, pull it from the rack, replace RAM, power on.
Same here.
Except its filled with ultra clean dust free liquid which wouldnt be if you touched it.
-
@gjacobse said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
@scottalanmiller said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
Could easily have a filtration system.
If you have the money to invest in a liquid immersion cooled system you had better have a filter system... and a nice clean room with positive air pressure.
Liquid cooling is done to save money.
-
@scottalanmiller said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
@momurda said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
Also seems it would be a huge pain in the ass to replace a failed component like a stick of RAM. I imagine the need for changing RAM happens in Datacenters.
Shouldn't be bad. How do you replace RAM normally? Power off the machine, pull it from the rack, replace RAM, power on.
Same here.
And it would have to be drained. Then filled up.
-
@momurda said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
@scottalanmiller said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
@momurda said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
Also seems it would be a huge pain in the ass to replace a failed component like a stick of RAM. I imagine the need for changing RAM happens in Datacenters.
Shouldn't be bad. How do you replace RAM normally? Power off the machine, pull it from the rack, replace RAM, power on.
Same here.
And it would have to be drained. Then filled up.
Why?
-
@momurda said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
@scottalanmiller said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
@momurda said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
Also seems it would be a huge pain in the ass to replace a failed component like a stick of RAM. I imagine the need for changing RAM happens in Datacenters.
Shouldn't be bad. How do you replace RAM normally? Power off the machine, pull it from the rack, replace RAM, power on.
Same here.
Except its filled with ultra clean dust free liquid which wouldnt be if you touched it.
Is it? Do we know that?
-
Phase change liquid is so viscous, I bet those ultra clean concerns aren't real. That's based on oil-based cooling, single phase.
-
@scottalanmiller Yes or it wouldnt work. Why do you think you could replace a piece of RAM in a full immersion system without draining it?
-
@momurda said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
@scottalanmiller Yes or it wouldnt work. Why do you think you could replace a piece of RAM in a full immersion system without draining it?
Why do you think you'd need to? Just pull the parts out.
-
@momurda said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
@scottalanmiller Yes or it wouldnt work.
Why wouldn't it work?
-
Remember this is a new liquid being used here, how does everyone seem to know so much about it?
-
Parts replacement is likely done by lifting the computer out of the tank. you would not want to reach in as your skin has stuff and oil on it.
Process (likely) is Raise and drip,.. remove/ replace, re simmer the system again.
-
@gjacobse said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
Parts replacement is likely done by lifting the computer out of the tank. you would not want to reach in as your skin has stuff and oil on it.
Process (likely) is Raise and drip,.. remove/ replace, re simmer the system again.
That's what I'm guessing. Might actually be easier than air cooled because of the lack of heavy chassis.
-
@scottalanmiller said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
@gjacobse said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
Parts replacement is likely done by lifting the computer out of the tank. you would not want to reach in as your skin has stuff and oil on it.
Process (likely) is Raise and drip,.. remove/ replace, re simmer the system again.
That's what I'm guessing. Might actually be easier than air cooled because of the lack of heavy chassis.
The thermal transfer to liquid is better than air as well.
-
I've been hearing of data centers that use liquid cooling for most of my IT career. It becomes more economical once you've reached a certain point.
Believe it or not, it's very easy to do with just some mineral oil at home. If water happens to get into the system, it just floats on the top and remains easy to skim off. Dust isn't so much of an issue, with a normal replacement cycle for computers just change the oil when the computer equipment gets changed. I've also heard that plain mineral oil can wear away electrical components. I've never experimented with this myself, so this is all 2nd hand stuff I've heard over the years.
-
@travisdh1 said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
I've been hearing of data centers that use liquid cooling for most of my IT career. It becomes more economical once you've reached a certain point.
The big bank on Wall St. that I was at put in chilled water cooling while I was there.
-
@travisdh1 said in ZTE Shows Off Immersion Server Liquid Cooling at MWC:
Believe it or not, it's very easy to do with just some mineral oil at home. If water happens to get into the system, it just floats on the top and remains easy to skim off. Dust isn't so much of an issue, with a normal replacement cycle for computers just change the oil when the computer equipment gets changed. I've also heard that plain mineral oil can wear away electrical components. I've never experimented with this myself, so this is all 2nd hand stuff I've heard over the years.
That stuff is messy, though. That's where a lot of the hesitation about liquid cooling comes from, I think.
