What Are You Doing Right Now
-
@hobbit666 said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
Is SW having issues this morning? It is so hard to tell from here because everything is so slow and their site is so heavy that it fails often even when other things work, but it is just normal. But I'm not seeing any issues at all on other sites and I've getting constant page failures there, no ability to post or load threads. Is it just me?
I wouldn't notice only visit once a day
mainly in the afternoon
But yeah seems slowNot slow, but nearly continuous "Secure Connection Failed" errors here.
-
@travisdh1 said in What Are You Doing Right Now:
Spending all evening making a new template and deploying basic assets in my lab. Not nearly so productive as I hopped.
That's the nice thing about libvirt. If you forget something just run virt-customize later and install something or edit something with virt-edit (or guestfish).
-
@scottalanmiller no issues on my side posting has been fine at least from mobile and desktop.
-
Just took the long walk to the grocery store. Well stocked now though.
-
I need a walk after the way this mornings already gone.
So much so that I can't even!
-
@DustinB3403 said in What Are You Doing Right Now:
I need a walk after the way this mornings already gone.
So much so that I can't even!
I haven't got to use this one in a while...
-
@stacksofplates said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
Spending all evening making a new template and deploying basic assets in my lab. Not nearly so productive as I hopped.
That's the nice thing about libvirt. If you forget something just run virt-customize later and install something or edit something with virt-edit (or guestfish).
It's XenServer, and I hadn't even setup a base CentOS image for it yet. Got the template made tho, so every "new" machine will only take a minute (or less) to deploy. It's always the specific service being setup that takes all the time.
-
@travisdh1 said in What Are You Doing Right Now:
@stacksofplates said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
Spending all evening making a new template and deploying basic assets in my lab. Not nearly so productive as I hopped.
That's the nice thing about libvirt. If you forget something just run virt-customize later and install something or edit something with virt-edit (or guestfish).
It's XenServer, and I hadn't even setup a base CentOS image for it yet. Got the template made tho, so every "new" machine will only take a minute (or less) to deploy. It's always the specific service being setup that takes all the time.
That's why you set up Salt / Ansible or some other CM system to make it painless.
-
@travisdh1 said in What Are You Doing Right Now:
@stacksofplates said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
Spending all evening making a new template and deploying basic assets in my lab. Not nearly so productive as I hopped.
That's the nice thing about libvirt. If you forget something just run virt-customize later and install something or edit something with virt-edit (or guestfish).
It's XenServer, and I hadn't even setup a base CentOS image for it yet. Got the template made tho, so every "new" machine will only take a minute (or less) to deploy. It's always the specific service being setup that takes all the time.
That would be a good project for me to work on
-
@dafyre said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@stacksofplates said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
Spending all evening making a new template and deploying basic assets in my lab. Not nearly so productive as I hopped.
That's the nice thing about libvirt. If you forget something just run virt-customize later and install something or edit something with virt-edit (or guestfish).
It's XenServer, and I hadn't even setup a base CentOS image for it yet. Got the template made tho, so every "new" machine will only take a minute (or less) to deploy. It's always the specific service being setup that takes all the time.
That's why you set up Salt / Ansible or some other CM system to make it painless.
Yeah, I'll be getting around to that, probably Salt to start with. I've tried Ansible in the past, but never really put the time in with it that's needed.
-
@wirestyle22 said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@stacksofplates said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
Spending all evening making a new template and deploying basic assets in my lab. Not nearly so productive as I hopped.
That's the nice thing about libvirt. If you forget something just run virt-customize later and install something or edit something with virt-edit (or guestfish).
It's XenServer, and I hadn't even setup a base CentOS image for it yet. Got the template made tho, so every "new" machine will only take a minute (or less) to deploy. It's always the specific service being setup that takes all the time.
That would be a good project for me to work on
Very, very good. Ansible is definitely the one with the more momentum.
-
@scottalanmiller said in What Are You Doing Right Now:
@wirestyle22 said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@stacksofplates said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
Spending all evening making a new template and deploying basic assets in my lab. Not nearly so productive as I hopped.
That's the nice thing about libvirt. If you forget something just run virt-customize later and install something or edit something with virt-edit (or guestfish).
It's XenServer, and I hadn't even setup a base CentOS image for it yet. Got the template made tho, so every "new" machine will only take a minute (or less) to deploy. It's always the specific service being setup that takes all the time.
That would be a good project for me to work on
Very, very good. Ansible is definitely the one with the more momentum.
Looking between the two of them, the salt config files make more sense to me, but I have not worked with Ansible any yet.
-
@dafyre said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@wirestyle22 said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@stacksofplates said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
Spending all evening making a new template and deploying basic assets in my lab. Not nearly so productive as I hopped.
That's the nice thing about libvirt. If you forget something just run virt-customize later and install something or edit something with virt-edit (or guestfish).
It's XenServer, and I hadn't even setup a base CentOS image for it yet. Got the template made tho, so every "new" machine will only take a minute (or less) to deploy. It's always the specific service being setup that takes all the time.
That would be a good project for me to work on
Very, very good. Ansible is definitely the one with the more momentum.
Looking between the two of them, the salt config files make more sense to me, but I have not worked with Ansible any yet.
Ansible + Tower looks downright amazing, at least without having used them yet. What I've seen of the Salt config files so far, which is what @scottalanmiller has posted here, do look easier to read.
-
@dafyre said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@wirestyle22 said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
@stacksofplates said in What Are You Doing Right Now:
@travisdh1 said in What Are You Doing Right Now:
Spending all evening making a new template and deploying basic assets in my lab. Not nearly so productive as I hopped.
That's the nice thing about libvirt. If you forget something just run virt-customize later and install something or edit something with virt-edit (or guestfish).
It's XenServer, and I hadn't even setup a base CentOS image for it yet. Got the template made tho, so every "new" machine will only take a minute (or less) to deploy. It's always the specific service being setup that takes all the time.
That would be a good project for me to work on
Very, very good. Ansible is definitely the one with the more momentum.
Looking between the two of them, the salt config files make more sense to me, but I have not worked with Ansible any yet.
I prefer Salt myself, but lots of people prefer Ansible. Both are very good.
-
@scottalanmiller said in What Are You Doing Right Now:
I prefer Salt myself, but lots of people prefer Ansible. Both are very good.
Might have to put these on my "project" list to have a look and play with
-
@hobbit666 said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
I prefer Salt myself, but lots of people prefer Ansible. Both are very good.
Might have to put these on my "project" list to have a look and play with
A little secret... we might be talking about some of this stuff at a certain convention coming up this summer.
-
The kids are addicted to SciShow Kids and are at the kitchen table doing science experiments on their own right now.
-
@scottalanmiller said in What Are You Doing Right Now:
@hobbit666 said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
I prefer Salt myself, but lots of people prefer Ansible. Both are very good.
Might have to put these on my "project" list to have a look and play with
A little secret... we might be talking about some of this stuff at a certain convention coming up this summer.
Blast it all, I'm trying to figure out my schedule still.
-
Just clocked out for today and will now visit my wife. She's in the hospital for the next few days.
-
@scottalanmiller said in What Are You Doing Right Now:
The kids are addicted to SciShow Kids and are at the kitchen table doing science experiments on their own right now.
Explodong Spaghetti volcano in 5...4...3....2...
