XenServer local storage on a T3500
-
@DustinB3403 said in XenServer local storage on a T3500:
For shits and giggles I'm gonna break my home lab tonight (pull the usb)
And follow that guide, it would be worthwhile to know if that works..
From my testing (in my "lab" ... aka non production machine at work) it works flawlessly.
Which is why I am not too worried about my USB drive dying.
Though for time sake in a crash, it would be nice to just have a clone of the boot USB. (Instead of reinstalling, re-updating, and then reattaching SR.)
-
@BRRABill said in XenServer local storage on a T3500:
@DustinB3403 said in XenServer local storage on a T3500:
For shits and giggles I'm gonna break my home lab tonight (pull the usb)
And follow that guide, it would be worthwhile to know if that works..
From my testing (in my "lab" ... aka non production machine at work) it works flawlessly.
Which is why I am not too worried about my USB drive dying.
Though for time sake in a crash, it would be nice to just have a clone of the boot USB. (Instead of reinstalling, re-updating, and then reattaching SR.)
Well you have a clone for the purpose of having it. Obviously it would save some time (should everything work).
But if it doesn't it would be great to know if the steps there work.
-
So the partition did not get set up properly by the installation routine? My guess is the "over 2TB" hypothesis again.
-
@DustinB3403 said
Well you have a clone for the purpose of having it. Obviously it would save some time (should everything work).
But if it doesn't it would be great to know if the steps there work.
Yep.
In fact, it works so well, I have not yet even made a clone!
Shhhhh, DO NOT tell my server this.
-
@BRRABill It's OKAY your server knows, and will blow up on you when you really need it to be stable.
-
@DustinB3403 said in XenServer local storage on a T3500:
@BRRABill It's OKAY your server knows, and will blow up on you when you really need it to be stable.
Dangit
-
On a side topic, a full backup of my filer (6.5TB) took 16 hours to complete, the delta will run tonight, and should be way faster!
But now it's done and out of the way.
-
@DustinB3403 said in XenServer local storage on a T3500:
For shits and giggles I'm gonna break my home lab tonight (pull the usb)
And follow that guide, it would be worthwhile to know if that works..
I can't speak for v7, but I know similar instructions work for v6.5
-
@DustinB3403 said in XenServer local storage on a T3500:
On a side topic, a full backup of my filer (6.5TB) took 16 hours to complete, the delta will run tonight, and should be way faster!
But now it's done and out of the way.
backup using what?
-
@Dashrender XO.
And before you get on the omg that took forever, it was the first backup ever taken (running 6.5 XS) of this VM (since rebuilding) and the VM is near max planned usage.
-
@scottalanmiller said in XenServer local storage on a T3500:
So the partition did not get set up properly by the installation routine? My guess is the "over 2TB" hypothesis again.
I'm curious about this as well.
When you installed XS, did it see your 6 TB array?
Did you choose a SR location during installation?
If so did it try to add it, and auto create ext3 like Dustin's did and fail to mount?
or did it just ignore it since it was over 2 TB?if you didn't choose a SR during install, What about the LVM didn't work?
-
@DustinB3403 said in XenServer local storage on a T3500:
@Dashrender XO.
And before you get on the omg that took forever, it was the first backup ever taken (running 6.5 XS) of this VM (since rebuilding) and the VM is near max planned usage.
No, quite the contrary - my 700 GB took 30+ hours, so your system was fast as hell!
-
@Dashrender said in XenServer local storage on a T3500:
@DustinB3403 said in XenServer local storage on a T3500:
@Dashrender XO.
And before you get on the omg that took forever, it was the first backup ever taken (running 6.5 XS) of this VM (since rebuilding) and the VM is near max planned usage.
No, quite the contrary - my 700 GB took 30+ hours, so your system was fast as hell!
Yeah that is pretty quick.
-
@Dashrender said in XenServer local storage on a T3500:
@DustinB3403 said in XenServer local storage on a T3500:
@Dashrender XO.
And before you get on the omg that took forever, it was the first backup ever taken (running 6.5 XS) of this VM (since rebuilding) and the VM is near max planned usage.
No, quite the contrary - my 700 GB took 30+ hours, so your system was fast as hell!
What the literal [moderated] 700GB and 30+ hours?!
-
Are you backing up to a remote location or to a local NAS?
I ran my backup to an onsite NAS over the 1GB management interface.
If I bonded a few pairs together on the server for management (I have em to spare, probably should've) it likely would've gone way faster.
-
@DustinB3403 said in XenServer local storage on a T3500:
Are you backing up to a remote location or to a local NAS?
I ran my backup to an onsite NAS over the 1GB management interface.
If I bonded a few pairs together on the server for management (I have em to spare, probably should've) it likely would've gone way faster.
I have the same backup performance issues that many other people have with XS. I'm backing up to a NAS target over a 1 GB link I think my best throughput was like 35 Mb.
The NAS is a 8 drive Drobo Pro.
As another test, I setup a PC with a 5 TB SATA WD Red Drive created a share and the performance was the same. In the case of this single drive, I might have been hitting a one drive write throughput max, so I don't really count it's performance.
-
@Dashrender said in XenServer local storage on a T3500:
@DustinB3403 said in XenServer local storage on a T3500:
Are you backing up to a remote location or to a local NAS?
I ran my backup to an onsite NAS over the 1GB management interface.
If I bonded a few pairs together on the server for management (I have em to spare, probably should've) it likely would've gone way faster.
I have the same backup performance issues that many other people have with XS. I'm backing up to a NAS target over a 1 GB link I think my best throughput was like 35 Mb.
The NAS is a 8 drive Drobo Pro.
As another test, I setup a PC with a 5 TB SATA WD Red Drive created a share and the performance was the same. In the case of this single drive, I might have been hitting a one drive write throughput max, so I don't really count it's performance.
You need to mention the backup tool that you are using. XS doesn't have it's own backups and backup speed is determined by the tool, not the platform.
-
@Dashrender said in XenServer local storage on a T3500:
The NAS is a 8 drive Drobo Pro.
As another test, I setup a PC with a 5 TB SATA WD Red Drive created a share and the performance was the same. In the case of this single drive, I might have been hitting a one drive write throughput max, so I don't really count it's performance.
Drobo Pro is RAID 5/6. It's insanely slow. Even the B800fs is insanely slow and it is faster by a bit. With write expansion and parity overhead problems, it is very likely that the write speed of a Drobo will be slower than a single drive. At best it is expected to be only about 20% faster than a single drive and that would only be if there was no latency introduced by the parity system and on a Drobo, there definitely is.
-
@scottalanmiller said in XenServer local storage on a T3500:
@Dashrender said in XenServer local storage on a T3500:
@DustinB3403 said in XenServer local storage on a T3500:
Are you backing up to a remote location or to a local NAS?
I ran my backup to an onsite NAS over the 1GB management interface.
If I bonded a few pairs together on the server for management (I have em to spare, probably should've) it likely would've gone way faster.
I have the same backup performance issues that many other people have with XS. I'm backing up to a NAS target over a 1 GB link I think my best throughput was like 35 Mb.
The NAS is a 8 drive Drobo Pro.
As another test, I setup a PC with a 5 TB SATA WD Red Drive created a share and the performance was the same. In the case of this single drive, I might have been hitting a one drive write throughput max, so I don't really count it's performance.
You need to mention the backup tool that you are using. XS doesn't have it's own backups and backup speed is determined by the tool, not the platform.
XO is what he's using. With XS 6.5 there have been numerous reported issues in the backup speed performance with XO. But due to some limitation / bug of XS 6.5
-
@scottalanmiller said in XenServer local storage on a T3500:
@Dashrender said in XenServer local storage on a T3500:
@DustinB3403 said in XenServer local storage on a T3500:
Are you backing up to a remote location or to a local NAS?
I ran my backup to an onsite NAS over the 1GB management interface.
If I bonded a few pairs together on the server for management (I have em to spare, probably should've) it likely would've gone way faster.
I have the same backup performance issues that many other people have with XS. I'm backing up to a NAS target over a 1 GB link I think my best throughput was like 35 Mb.
The NAS is a 8 drive Drobo Pro.
As another test, I setup a PC with a 5 TB SATA WD Red Drive created a share and the performance was the same. In the case of this single drive, I might have been hitting a one drive write throughput max, so I don't really count it's performance.
You need to mention the backup tool that you are using. XS doesn't have it's own backups and backup speed is determined by the tool, not the platform.
XO
