XenServer NFS Storage Repo in the SMB

scottalanmiller

That's why it's important to use thin provisioned storage as possible.

Like local files and/or NFS

scottalanmiller

@olivier is it a reasonable assumption that you'd want to have at least double the capacity that you're using on the Local Xen SR when building the Delta for that process?

Not generally, no. That's huge. You have to know something about your system, if course, but this is a theoretical limit, not a practical number.

DustinB3403

@scottalanmiller said:

@DustinB3403 said:

@scottalanmiller the reason for scaling up to 22TB would be for the time & space it takes to build the delta which is a Snapshot on the Host, until it gets put onto the NFS Server.

Which would then copy it to an External NAS (and with planning another external device like a USB)

3-2-1 Backup.

Live and 2 copies on different media and one off site.

Okay, so that's assuming 11TB of native VMs and 100% deltas and backing up the entire server in a single go to be able to hit that? Do those things happen?

No, but if I don't plan for it now, when it happens in a years time because of poor decision making I'll be the asshole who didn't plan for stupidity.

scottalanmiller

@DustinB3403 said:

@scottalanmiller said:

@DustinB3403 said:

@scottalanmiller the reason for scaling up to 22TB would be for the time & space it takes to build the delta which is a Snapshot on the Host, until it gets put onto the NFS Server.

Which would then copy it to an External NAS (and with planning another external device like a USB)

3-2-1 Backup.

Live and 2 copies on different media and one off site.

Okay, so that's assuming 11TB of native VMs and 100% deltas and backing up the entire server in a single go to be able to hit that? Do those things happen?

No, but if I don't plan for it now, when it happens in a years time because of poor decision making I'll be the asshole who didn't plan for stupidity.

So the thing that you are ACTUALLY planning for is using 16TB of storage for VMs. That's fine, but be transparent about what you are planning for. It's not the backups, it's overrunning the intended storage.

DustinB3403

@scottalanmiller I wasn't trying to be non-transparent.

Just trying to make a point that you need to have enough space for the eventuality of growth, which might change plans.

scottalanmiller

@DustinB3403 said:

@scottalanmiller I wasn't trying to be non-transparent.

Just trying to make a point that you need to have enough space for the eventuality of growth, which might change plans.

To make it transparent, you would state it as X storage + Y for backup overhead. Not project 11TB as the growth number, then add another growth number and the backup overhead together.

So in your case, accounting for future unknown growth, you'd have something like 16TB and a reasonable 5TB of space for snaps during the backup process. Which sounds a lot more reasonable.

stacksofplates

So this is kind of a related question. Normally thin LVMs look like the test one I created here:

root@Megatron:/home/jhooks# lvs
  LV     VG        Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  root   ubuntu-vg -wi-ao----   1.81t                                                    
  swap_1 ubuntu-vg -wi-ao----   7.96g                                                    
  test   ubuntu-vg twi-a-tz-- 100.00m             0.00   0.88                            
root@Megatron:/home/jhooks#

However XenServer doesn't show a Data or Meta section, is that just because it's Centos 6? It shows a type of linear for each LVM. So if they aren't thin provisioned does it create the LVM, then attach a thin provisioned VHD over top?

olivier

@johnhooks If you are on a XenServer pre-Dundee, that's normal: LVM is not thin provisioned in this case.

Dashrender

@olivier said:

@DustinB3403 Even classical backup: for a running VM we need to export the snapshot. So if all your VMs are running and you are backuping everything at once, you'll need to double your space usage (at least during the VM export process).

That's why it's important to use thin provisioned storage as possible.

HUH? Creating a Snap doesn't instantly create a double of your current in use storage. Assuming a 2 TB VM, you snap it, As I understand it, what happens is the current 2 TB file is no longer written to, and a new additional file is created where all of the changes are written to. If that VM isn't very change heavy, the Snap file most likely will remain small. Of course there are times when the system might be changing data like crazy - out with the old, in with the new - so total usage doesn't change, but actual changes could be epic.

olivier

@Dashrender It's not exactly like that on a thick storage. It's a little bit more complicated in fact.

It depends of the current disk content. XenServer will try to deflate as possible. Let's take for example, only one VDI with the total size of the disk space provisioned (let's say on a LVMoiSCSI):

Then, if you do a snapshot, you'll have 3 disks:

the original one will become the parent
the new created active VDI will be remapped to be current VM disk
the snapshot

Doubling size is the worst case, when deflate won't free some space (or very little). In this case, the initial snapshot mechanism will double the space used.

But any extra snapshot (after the initial one) won't consume a lot of space.

olivier

By the way, you can spot the difference with a thin provisioned SR, like NFS in this case:

Far better...

Dashrender

Interesting. What happens when you take a second snap? When it is deleted, is the there two or three files now?

olivier

@Dashrender Okay let's retake a clean example: one VM in a SR, with one 4GB VDI:

# lvscan 
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/MGT' [4.00 MiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-770ceeac-e97e-4e05-b9c5-892b97b9d16e' [4.02 GiB] inherit

After first snapshot:

# lvscan 
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/MGT' [4.00 MiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-38e2156f-da74-4edb-ac83-56fda54cfe55' [1.75 GiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-770ceeac-e97e-4e05-b9c5-892b97b9d16e' [4.02 GiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-f18856a5-039b-4d84-bf6c-a259d0f49a9e' [8.00 MiB] inherit

After second snapshot:

# lvscan 
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/MGT' [4.00 MiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-38e2156f-da74-4edb-ac83-56fda54cfe55' [1.75 GiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-f18856a5-039b-4d84-bf6c-a259d0f49a9e' [8.00 MiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-770ceeac-e97e-4e05-b9c5-892b97b9d16e' [4.02 GiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-68408f33-5a69-4b3b-afdd-a2cfabcad9ba' [8.00 MiB] inherit

As you can see, we got a second 8 MiB logical volume, nothing more (base parent and active VDI doesn't change).

Let's remove the latest snapshot:

# lvscan 
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/MGT' [4.00 MiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-38e2156f-da74-4edb-ac83-56fda54cfe55' [1.75 GiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-f18856a5-039b-4d84-bf6c-a259d0f49a9e' [8.00 MiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-770ceeac-e97e-4e05-b9c5-892b97b9d16e' [4.02 GiB] inherit

It removes the previously created volume, as expected. Now, let's remove the initial snapshot. Durin few seconds, we'll have this:

lvscan 
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/MGT' [4.00 MiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-38e2156f-da74-4edb-ac83-56fda54cfe55' [1.75 GiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-770ceeac-e97e-4e05-b9c5-892b97b9d16e' [8.00 MiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/leaf_770ceeac-e97e-4e05-b9c5-892b97b9d16e_38e2156f-da74-4edb-ac83-56fda54cfe55' [4.00 MiB] inherit

But it will be automatically "garbage collected" when the system will see than the chain doesn't have any snapshot in it (after few seconds in this case):

# lvscan 
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/MGT' [4.00 MiB] inherit
  inactive          '/dev/VG_XenStorage-e27c48de-509f-3fec-d627-7f348062ab1a/VHD-770ceeac-e97e-4e05-b9c5-892b97b9d16e' [4.02 GiB] inherit

We are back to the initial situation.