Backup and Recovery Goals
-
@hubtechagain said:
but if you're a 1 site location and power goes out..... power is out. get a generator? regardless of server location, unless you use RDS or have an alt location, you'd be down down down until power comes up.
So are you saying, if you are planning for a power outage, make sure you know the whole plan, and if you even care if the server is working considering the rest of the business?
-
@Dashrender said:
@DustinB3403 said:
So it has to go to a local storage first, then to tape.
Kind of what I was reading, just putting thoughts out there.
But if that's the case, you only need enough storage to stage the data, 8 or so TB, not the full 24 GB you've been looking at.
Yes, although if doing that normally you will use the disk as a point for restore too, makes things much faster.
-
So I found a rather easy way to find our delta for last week. 12.52 GB. Which isn't that much. Pushed out hourly to an online storage service could be reasonable.
Now to find options..
-
@DustinB3403 said:
A power outage would still result in an outage. And its more to try and protect.
But do you need a second server at all?
-
The boss just told me to look at the Bronze and Copper options. So that kind of removes the available funds for a second server.
-
@DustinB3403 said:
The boss just told me to look at the Bronze and Copper options. So that kind of removes the available funds for a second server.
I'm not sure that I understand the metallic reference.
-
Cadellac vs a Honda options
-
Oh okay, I thought maybe but wasn't sure if that was what you meant.
-
A single server and tape backup for offsite might REALLY make sense. Unless you have a full secondary site to fail to and deep pockets, this is how SMBs generally run.
OR backup to cloud or similar instead of tape. You can play with that a little bit.
-
Obviously Porsche would be the Gold option, and Ferrari would be the Platinum option.
-
You have a bit of old equipment that should be able to be reused here.
Again, back to my suggestion:
1 new server for all production workloads1 local onsite backup server (running StorageCraft) - maybe a new to you/used box if current hardware won't work
1 offsite at your remote location replicated with the StorageCraft box - use currently owned hardware
-
@DustinB3403 said:
So I found a rather easy way to find our delta for last week. 12.52 GB. Which isn't that much. Pushed out hourly to an online storage service could be reasonable.
Now to find options..
12.52 GB = 100.16 Gb = 100,160 Mb Assuming the 30 Mb/s connection mentioned earlier (and that you can use the whole thing) = 3338.7 seconds = 55.64 Mins
OK not bad, takes about 1 hour a day at full saturation to push that to your remote site. As you said, if you do that hourly, you should be fine.
-
Alright @scottalanmiller, Dustin seems to really want his full backups. Am I crazy to think they really aren't needed considering he has a StorageCraft backup solution?
I know this is a point of difference of opinion between Dustin and I.
-
@Dashrender said:
@DustinB3403 said:
So I found a rather easy way to find our delta for last week. 12.52 GB. Which isn't that much. Pushed out hourly to an online storage service could be reasonable.
Now to find options..
12.52 GB = 100.16 Gb = 100,160 Mb Assuming the 30 Mb/s connection mentioned earlier (and that you can use the whole thing) = 3338.7 seconds = 55.64 Mins
OK not bad, takes about 1 hour a day at full saturation to push that to your remote site. As you said, if you do that hourly, you should be fine.
Which can be done at night. Kick it off two hours after people have gone home and you are good to go.
-
@Dashrender said:
Alright @scottalanmiller, Dustin seems to really want his full backups. Am I crazy to think they really aren't needed considering he has a StorageCraft backup solution?
I know this is a point of difference of opinion between Dustin and I.
Weekly fulls? No, not needed.
-
@Dashrender and @scottalanmiller how should I backup my VM's then? What is the restore process for if a VM takes a dive and I have no full to recover from?
The backup process has to remain someone current.
-
@DustinB3403 said:
@Dashrender and @scottalanmiller how should I backup my VM's then? What is the restore process for if a VM takes a dive and I have no full to recover from?
The backup process has to remain someone current.
StorageCraft creates synthetic full backups from the incrementals. Veeam, Backup Exec, Unitrends, etc all do this.
You mount the date/time of the restore you want to perform, and say - do the whole enchilada.
-
I'm not familiar with StorageCraft specifically, so I speak about AppAssure.
With AA I boot from a CD in the VM I want to restore to. That image finds my AA server on the network, I authenticate then choose my restore point, and tell it to restore the whole thing.
-
@scottalanmiller said:
@Dashrender said:
@DustinB3403 said:
So I found a rather easy way to find our delta for last week. 12.52 GB. Which isn't that much. Pushed out hourly to an online storage service could be reasonable.
Now to find options..
12.52 GB = 100.16 Gb = 100,160 Mb Assuming the 30 Mb/s connection mentioned earlier (and that you can use the whole thing) = 3338.7 seconds = 55.64 Mins
OK not bad, takes about 1 hour a day at full saturation to push that to your remote site. As you said, if you do that hourly, you should be fine.
Which can be done at night. Kick it off two hours after people have gone home and you are good to go.
It could be, but if he's extra paranoid, or just wants to make sure the sync is more than once a day, he can kick it off hourly.
Assuming the typical work day (for production of files) you're dividing that hour into 9 chunks, so it should take around 7 mins at full speed, probably more like 12 at not full speed.
-
@DustinB3403 said:
@Dashrender and @scottalanmiller how should I backup my VM's then? What is the restore process for if a VM takes a dive and I have no full to recover from?
The backup process has to remain someone current.
You have a full ready to go that is older, say monthly, and you apply the delta to it. Instead of incrementals, move to differentials. All you need is the full plus the differential. Inrementals mean you that you need EVERY incremental to do a restore. Differentials mean you only need the Full plus the latest Diff.
