MSP Helpdesk Options
-
@JaredBusch said in MSP Helpdesk Options:
The product development was dropped, but it was never disabled to be used. Now it likely will.
They claimed that they disabled the "remote kill" ability so that their infrastructure was no longer in use. Is the assumption that they broke their terms of service and secretly kept it tied and they can (and will) remote kill people's systems?
-
@JaredBusch said in MSP Helpdesk Options:
The hosted helpdesk was still active until this year
Still a little active, AFAIK. Very lightly, but something, I think.
-
@scottalanmiller said in MSP Helpdesk Options:
@JaredBusch said in MSP Helpdesk Options:
The product development was dropped, but it was never disabled to be used. Now it likely will.
They claimed that they disabled the "remote kill" ability so that their infrastructure was no longer in use. Is the assumption that they broke their terms of service and secretly kept it tied and they can (and will) remote kill people's systems?
I never saw that. So I assumed it was still all tied to the community accounts and such.
-
@JaredBusch said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@JaredBusch said in MSP Helpdesk Options:
The product development was dropped, but it was never disabled to be used. Now it likely will.
They claimed that they disabled the "remote kill" ability so that their infrastructure was no longer in use. Is the assumption that they broke their terms of service and secretly kept it tied and they can (and will) remote kill people's systems?
I never saw that. So I assumed it was still all tied to the community accounts and such.
they had a massive outage a couple years ago and everyone found out that they had been tying it together (and had no redundancy) so when their ISP failed, every on prem SW failed with it. Then they promised that it was separated and no longer depended no their no-redundancy, no-failover back end. And I'd heard from people who tested that it seemed to actually be done. So my understanding was that they really did it, but they are always pretty suspect, for obvious reasons, they've violated their terms so often that there is a good chance they would have turned it back on later. But they were so exposed when it happened that it seems kind of unlikely that they would risk that happening again.
-
@scottalanmiller said in MSP Helpdesk Options:
Spiceworks (viability)....
Funny it took only six days since stating this risk concern before it came true. So that was a well founded worry.
-
@vhinzsanchez said in MSP Helpdesk Options:
Had deployed SW on-premise in my previous employment, I do not know how it will fare out after reading the news earlier. It has been rock solid even when others had an issue logging in when a problem struck...it seemed that my installation was not affected then.
I've tried and really liked osTicket but I am now testing GLPI. I was looking into a ticketing system with inventory and the features which tied the ticket to a person and/or hardware and keep its history (like SW). GLPI with FusionInventory seemed to be just that.
Let me know if you need any help, I've been dealing with the inventory side of that combo for going on 3 years now. Going to be getting more into the data-center / server room management side of it with the management and financials stuff next week.
-
@notverypunny said in MSP Helpdesk Options:
@vhinzsanchez said in MSP Helpdesk Options:
Had deployed SW on-premise in my previous employment, I do not know how it will fare out after reading the news earlier. It has been rock solid even when others had an issue logging in when a problem struck...it seemed that my installation was not affected then.
I've tried and really liked osTicket but I am now testing GLPI. I was looking into a ticketing system with inventory and the features which tied the ticket to a person and/or hardware and keep its history (like SW). GLPI with FusionInventory seemed to be just that.
Let me know if you need any help, I've been dealing with the inventory side of that combo for going on 3 years now. Going to be getting more into the data-center / server room management side of it with the management and financials stuff next week.
With GLPI? I need to install that one again and poke around.
-
@scottalanmiller said in MSP Helpdesk Options:
@JaredBusch said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@JaredBusch said in MSP Helpdesk Options:
The product development was dropped, but it was never disabled to be used. Now it likely will.
They claimed that they disabled the "remote kill" ability so that their infrastructure was no longer in use. Is the assumption that they broke their terms of service and secretly kept it tied and they can (and will) remote kill people's systems?
I never saw that. So I assumed it was still all tied to the community accounts and such.
they had a massive outage a couple years ago and everyone found out that they had been tying it together (and had no redundancy) so when their ISP failed, every on prem SW failed with it. Then they promised that it was separated and no longer depended no their no-redundancy, no-failover back end. And I'd heard from people who tested that it seemed to actually be done. So my understanding was that they really did it, but they are always pretty suspect, for obvious reasons, they've violated their terms so often that there is a good chance they would have turned it back on later. But they were so exposed when it happened that it seems kind of unlikely that they would risk that happening again.
It is still tied to it at least on the initial setup, same for network monitor. You can set it up offline after that but it does need checkins for the plugins such as warranty check, cloud detection, alien vault alerts, software updates by Zoho and many more.
-
@dbeato said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@JaredBusch said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@JaredBusch said in MSP Helpdesk Options:
The product development was dropped, but it was never disabled to be used. Now it likely will.
They claimed that they disabled the "remote kill" ability so that their infrastructure was no longer in use. Is the assumption that they broke their terms of service and secretly kept it tied and they can (and will) remote kill people's systems?
I never saw that. So I assumed it was still all tied to the community accounts and such.
they had a massive outage a couple years ago and everyone found out that they had been tying it together (and had no redundancy) so when their ISP failed, every on prem SW failed with it. Then they promised that it was separated and no longer depended no their no-redundancy, no-failover back end. And I'd heard from people who tested that it seemed to actually be done. So my understanding was that they really did it, but they are always pretty suspect, for obvious reasons, they've violated their terms so often that there is a good chance they would have turned it back on later. But they were so exposed when it happened that it seems kind of unlikely that they would risk that happening again.
It is still tied to it at least on the initial setup, same for network monitor. You can set it up offline after that but it does need checkins for the plugins such as warranty check, cloud detection, alien vault alerts, software updates by Zoho and many more.
Additional stuff i"m not surprised, but I think that the product itself is offline, at least after install?
-
@scottalanmiller said in MSP Helpdesk Options:
@dbeato said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@JaredBusch said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@JaredBusch said in MSP Helpdesk Options:
The product development was dropped, but it was never disabled to be used. Now it likely will.
They claimed that they disabled the "remote kill" ability so that their infrastructure was no longer in use. Is the assumption that they broke their terms of service and secretly kept it tied and they can (and will) remote kill people's systems?
I never saw that. So I assumed it was still all tied to the community accounts and such.
they had a massive outage a couple years ago and everyone found out that they had been tying it together (and had no redundancy) so when their ISP failed, every on prem SW failed with it. Then they promised that it was separated and no longer depended no their no-redundancy, no-failover back end. And I'd heard from people who tested that it seemed to actually be done. So my understanding was that they really did it, but they are always pretty suspect, for obvious reasons, they've violated their terms so often that there is a good chance they would have turned it back on later. But they were so exposed when it happened that it seems kind of unlikely that they would risk that happening again.
It is still tied to it at least on the initial setup, same for network monitor. You can set it up offline after that but it does need checkins for the plugins such as warranty check, cloud detection, alien vault alerts, software updates by Zoho and many more.
Additional stuff i"m not surprised, but I think that the product itself is offline, at least after install?
Only after install and still dependent of gekko.spiceworks.com
-
@dbeato said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@dbeato said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@JaredBusch said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@JaredBusch said in MSP Helpdesk Options:
The product development was dropped, but it was never disabled to be used. Now it likely will.
They claimed that they disabled the "remote kill" ability so that their infrastructure was no longer in use. Is the assumption that they broke their terms of service and secretly kept it tied and they can (and will) remote kill people's systems?
I never saw that. So I assumed it was still all tied to the community accounts and such.
they had a massive outage a couple years ago and everyone found out that they had been tying it together (and had no redundancy) so when their ISP failed, every on prem SW failed with it. Then they promised that it was separated and no longer depended no their no-redundancy, no-failover back end. And I'd heard from people who tested that it seemed to actually be done. So my understanding was that they really did it, but they are always pretty suspect, for obvious reasons, they've violated their terms so often that there is a good chance they would have turned it back on later. But they were so exposed when it happened that it seems kind of unlikely that they would risk that happening again.
It is still tied to it at least on the initial setup, same for network monitor. You can set it up offline after that but it does need checkins for the plugins such as warranty check, cloud detection, alien vault alerts, software updates by Zoho and many more.
Additional stuff i"m not surprised, but I think that the product itself is offline, at least after install?
Only after install and still dependent of gekko.spiceworks.com
What does Gekko do and what happens when it goes away?
-
@scottalanmiller said in MSP Helpdesk Options:
@dbeato said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@dbeato said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@JaredBusch said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@JaredBusch said in MSP Helpdesk Options:
The product development was dropped, but it was never disabled to be used. Now it likely will.
They claimed that they disabled the "remote kill" ability so that their infrastructure was no longer in use. Is the assumption that they broke their terms of service and secretly kept it tied and they can (and will) remote kill people's systems?
I never saw that. So I assumed it was still all tied to the community accounts and such.
they had a massive outage a couple years ago and everyone found out that they had been tying it together (and had no redundancy) so when their ISP failed, every on prem SW failed with it. Then they promised that it was separated and no longer depended no their no-redundancy, no-failover back end. And I'd heard from people who tested that it seemed to actually be done. So my understanding was that they really did it, but they are always pretty suspect, for obvious reasons, they've violated their terms so often that there is a good chance they would have turned it back on later. But they were so exposed when it happened that it seems kind of unlikely that they would risk that happening again.
It is still tied to it at least on the initial setup, same for network monitor. You can set it up offline after that but it does need checkins for the plugins such as warranty check, cloud detection, alien vault alerts, software updates by Zoho and many more.
Additional stuff i"m not surprised, but I think that the product itself is offline, at least after install?
Only after install and still dependent of gekko.spiceworks.com
What does Gekko do and what happens when it goes away?
Scripts and such
https://community.spiceworks.com/topic/2142631-spiceworks-hangs -
Just found out that RepairShopr is $99 for 10 users and $200 extra for the 1 more user.
Time for a new CRM Soon.
-
@CCWTech said in MSP Helpdesk Options:
Just found out that RepairShopr is $99 for 10 users and $200 extra for the 1 more user.
Time for a new CRM Soon.
I bet you get a block of users for that? If not, wow.
-
@scottalanmiller said in MSP Helpdesk Options:
@CCWTech said in MSP Helpdesk Options:
Just found out that RepairShopr is $99 for 10 users and $200 extra for the 1 more user.
Time for a new CRM Soon.
I bet you get a block of users for that? If not, wow.
It would have to be a block of 20 to make any sense.
-
@CCWTech said in MSP Helpdesk Options:
@scottalanmiller said in MSP Helpdesk Options:
@CCWTech said in MSP Helpdesk Options:
Just found out that RepairShopr is $99 for 10 users and $200 extra for the 1 more user.
Time for a new CRM Soon.
I bet you get a block of users for that? If not, wow.
It would have to be a block of 20 to make any sense.
that's what I had been figuring that it was, like 30+ users.
But looking at their site, they only go to 10 users and have no "contact us for pricing for more" or any larger category. I think that you've just topped out their platform and they don't want you to keep going down that path so the pricing is a punishment for trying to get too big with that product.
-
I'm sure this has been discussed din the past, but what about https://suitecrm.com/ if cost is an issue?
-
@DustinB3403 said in MSP Helpdesk Options:
I'm sure this has been discussed din the past, but what about https://suitecrm.com/ if cost is an issue?
That's a CRM. Of course, CRM and Helpdesk systems have overlaps, but if free helpdesks don't really stack up, the chances that a free CRM is going to is pretty low. We've used vTiger, SugarCRM, and SuiteCRM in the past and while all are mediocre as CRMs, I can't imagine trying to use them as helpdesk systems.
-
This is the exact verbiage. It will increase the MONTLY bill by $200.00 so I don't think I am reading it wrong. Now hopefully they made a typo!!
Nothing yet from @robert yet but it is a weekend so maybe he's not monitoring.
-
@CCWTech what it doesn't tell you is if the 12th user will cost zero, $200, $2000... no idea.
