Network setup - Hyper-V
-
@ccwtech said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
Transfer speed of a folder with files (about 300 Meg) is about 20 MB/s
20 MB/s which seems VERY slow to me.
Is that with IP or DNS?
-
@black3dynamite said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
Transfer speed of a folder with files (about 300 Meg) is about 20 MB/s
20 MB/s which seems VERY slow to me.
Is that with IP or DNS?
DNS I will try via IP
-
@jaredbusch said in Network setup - Hyper-V:
The implementation of VMQ was rolled out so badly.
I ranted on it in a thread more than a year ago.
https://mangolassi.it/topic/8358/i-hate-vmqYou can disable it on the NICs quite easily.
Get-NetAdapterVmq | Disable-NetAdapterVmqIf you haven't done this, I'm going to suggest this again. Run it on the Hyper-V host. I've seen this clear up issues on both Intel and Broadcom chips.
-
@ccwtech said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
Transfer speed of a folder with files (about 300 Meg) is about 20 MB/s
20 MB/s which seems VERY slow to me.
Yeah, 160 Mb/s on a 1 GB line, that is pretty slow.
-
@dafyre said in Network setup - Hyper-V:
@jaredbusch said in Network setup - Hyper-V:
The implementation of VMQ was rolled out so badly.
I ranted on it in a thread more than a year ago.
https://mangolassi.it/topic/8358/i-hate-vmqYou can disable it on the NICs quite easily.
Get-NetAdapterVmq | Disable-NetAdapterVmqIf you haven't done this, I'm going to suggest this again. Run it on the Hyper-V host. I've seen this clear up issues on both Intel and Broadcom chips.
I know I've suggested running this several times since it was first mentioned.
How about showing the output forGet-NetworkAdapterVmq -
@dashrender said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
Transfer speed of a folder with files (about 300 Meg) is about 20 MB/s
20 MB/s which seems VERY slow to me.
Yeah, 160 Mb/s on a 1 GB line, that is pretty slow.
Actually, that's not all that bad. SMB is insanely chatty.
-
@scottalanmiller said in Network setup - Hyper-V:
@dashrender said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
Transfer speed of a folder with files (about 300 Meg) is about 20 MB/s
20 MB/s which seems VERY slow to me.
Yeah, 160 Mb/s on a 1 GB line, that is pretty slow.
Actually, that's not all that bad. SMB is insanely chatty.
I can typically transfer over 500 Mb/s on my network between Win10 and Server 2012R2.
-
@dashrender said in Network setup - Hyper-V:
@scottalanmiller said in Network setup - Hyper-V:
@dashrender said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
Transfer speed of a folder with files (about 300 Meg) is about 20 MB/s
20 MB/s which seems VERY slow to me.
Yeah, 160 Mb/s on a 1 GB line, that is pretty slow.
Actually, that's not all that bad. SMB is insanely chatty.
I can typically transfer over 500 Mb/s on my network between Win10 and Server 2012R2.
What SMB version?
-
@scottalanmiller said in Network setup - Hyper-V:
@dashrender said in Network setup - Hyper-V:
@scottalanmiller said in Network setup - Hyper-V:
@dashrender said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
Transfer speed of a folder with files (about 300 Meg) is about 20 MB/s
20 MB/s which seems VERY slow to me.
Yeah, 160 Mb/s on a 1 GB line, that is pretty slow.
Actually, that's not all that bad. SMB is insanely chatty.
I can typically transfer over 500 Mb/s on my network between Win10 and Server 2012R2.
What SMB version?
Great question, I've never dug into it.
-
@dashrender said in Network setup - Hyper-V:
@scottalanmiller said in Network setup - Hyper-V:
@dashrender said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
Transfer speed of a folder with files (about 300 Meg) is about 20 MB/s
20 MB/s which seems VERY slow to me.
Yeah, 160 Mb/s on a 1 GB line, that is pretty slow.
Actually, that's not all that bad. SMB is insanely chatty.
I can typically transfer over 500 Mb/s on my network between Win10 and Server 2012R2.
With SMBv1 you won’t get that... also do you have SSDs?
-
@dbeato said in Network setup - Hyper-V:
@dashrender said in Network setup - Hyper-V:
@scottalanmiller said in Network setup - Hyper-V:
@dashrender said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
Transfer speed of a folder with files (about 300 Meg) is about 20 MB/s
20 MB/s which seems VERY slow to me.
Yeah, 160 Mb/s on a 1 GB line, that is pretty slow.
Actually, that's not all that bad. SMB is insanely chatty.
I can typically transfer over 500 Mb/s on my network between Win10 and Server 2012R2.
With SMBv1 you won’t get that... also do you have SSDs?
SSD = nope in server, yes in desktop
-
@dashrender said in Network setup - Hyper-V:
Get-NetworkAdapterVmq
I just get an error saying that's not a recognized command. That is for powershell right? (I also tried command line)
-
I have also copied the application to the physical server to do some testing.
-
@ccwtech said in Network setup - Hyper-V:
@dashrender said in Network setup - Hyper-V:
Get-NetworkAdapterVmq
I just get an error saying that's not a recognized command. That is for powershell right? (I also tried command line)
Get-NetAdapterVmq
-
@black3dynamite said in Network setup - Hyper-V:
Get-NetAdapterVmq
Thanks.
Running that command produces no output. It just goes to the next line.
-
@ccwtech said in Network setup - Hyper-V:
@black3dynamite said in Network setup - Hyper-V:
Get-NetAdapterVmq
Thanks.
Running that command produces no output. It just goes to the next line.
Vmq not enabled.
-
Did your run that on the Hyper-V host or the VM? or both?
What is the current status of NIC teaming? do you have one on the Hyper-V?
-
@black3dynamite said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
@black3dynamite said in Network setup - Hyper-V:
Get-NetAdapterVmq
Thanks.
Running that command produces no output. It just goes to the next line.
Vmq not enabled.
Well that's good and bad... Good that it's not enabled, but bad that that's not the solution.
-
Ran on both, same result (no output). I had them teamed but unteamed for testing to see if that was the issue.
-
Can you provide any information about the system requirements for the veterinary software?
