Network setup - Hyper-V
-
@dashrender said in Network setup - Hyper-V:
Get-NetworkAdapterVmq
I just get an error saying that's not a recognized command. That is for powershell right? (I also tried command line)
-
I have also copied the application to the physical server to do some testing.
-
@ccwtech said in Network setup - Hyper-V:
@dashrender said in Network setup - Hyper-V:
Get-NetworkAdapterVmq
I just get an error saying that's not a recognized command. That is for powershell right? (I also tried command line)
Get-NetAdapterVmq
-
@black3dynamite said in Network setup - Hyper-V:
Get-NetAdapterVmq
Thanks.
Running that command produces no output. It just goes to the next line.
-
@ccwtech said in Network setup - Hyper-V:
@black3dynamite said in Network setup - Hyper-V:
Get-NetAdapterVmq
Thanks.
Running that command produces no output. It just goes to the next line.
Vmq not enabled.
-
Did your run that on the Hyper-V host or the VM? or both?
What is the current status of NIC teaming? do you have one on the Hyper-V?
-
@black3dynamite said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
@black3dynamite said in Network setup - Hyper-V:
Get-NetAdapterVmq
Thanks.
Running that command produces no output. It just goes to the next line.
Vmq not enabled.
Well that's good and bad... Good that it's not enabled, but bad that that's not the solution.
-
Ran on both, same result (no output). I had them teamed but unteamed for testing to see if that was the issue.
-
Can you provide any information about the system requirements for the veterinary software?
-
@black3dynamite said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
Odd to say the least. Their system requirements are low, we even purchased a new PC (for one of the workstations) to see if that would help.
The new PC is a I5-7400 CPU 2.4 Ghz with 8 GB Ram so it is more than sufficient.
Requirements:
Processor Intel
Core i7, i5, i3 Intel Core 
2 Duo 2.53 GHz
RAM 6 GB (64-bit) | 4 GB (32-bit) 2 GB
Hard Disk 160 GB available disk space 80 GB available disk space
Optical Drive DVD RW DVD ROM
Network Adapter Ethernet 100/1000 Ethernet 100/1000
Monitor 19 LCD/LED (or larger) 17 LCD/LED
Video Adapter 32-bit, 1024 x 768
or higher resolution capable
16-bit, 800 x 600
or higher resolution capable
Sound Standard sound card Standard sound card
USB 6 available USB 2.0 Ports 4 available USB 2.0 Ports
Operating Systems (32/64-bit) Windows 10 Professional
Windows 8.1 Professional
Windows 7 ProfessionalYou can try setting up a Windows 10, 8.1 and 7 VM on the host and see if the performance is still slow.
-
@ccwtech said in Network setup - Hyper-V:
@black3dynamite said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
Odd to say the least. Their system requirements are low, we even purchased a new PC (for one of the workstations) to see if that would help.
The new PC is a I5-7400 CPU 2.4 Ghz with 8 GB Ram so it is more than sufficient.
Requirements:
Processor Intel Core i7, i5, i3 Intel Core 2 Duo 2.53 GHz
RAM 6 GB (64-bit) | 4 GB (32-bit) 2 GB
Hard Disk 160 GB available disk space 80 GB available disk space
Optical Drive DVD RW DVD ROM
Network Adapter Ethernet 100/1000 Ethernet 100/1000
Monitor 19 LCD/LED (or larger) 17 LCD/LED
Video Adapter 32-bit, 1024 x 768
or higher resolution capable
16-bit, 800 x 600
or higher resolution capable
Sound Standard sound card Standard sound card
USB 6 available USB 2.0 Ports 4 available USB 2.0 Ports
Operating Systems (32/64-bit) Windows 10 Professional
Windows 8.1 Professional
Windows 7 ProfessionalYou can try setting up a Windows 10, 8.1 and 7 VM on the host and see if the performance is still slow.
Is it meant to be accessible via network shares?
-
Yes, that is primarily how it's used.
-
@black3dynamite said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
@black3dynamite said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
Odd to say the least. Their system requirements are low, we even purchased a new PC (for one of the workstations) to see if that would help.
The new PC is a I5-7400 CPU 2.4 Ghz with 8 GB Ram so it is more than sufficient.
Requirements:
Processor Intel Core i7, i5, i3 Intel Core 2 Duo 2.53 GHz
RAM 6 GB (64-bit) | 4 GB (32-bit) 2 GB
Hard Disk 160 GB available disk space 80 GB available disk space
Optical Drive DVD RW DVD ROM
Network Adapter Ethernet 100/1000 Ethernet 100/1000
Monitor 19 LCD/LED (or larger) 17 LCD/LED
Video Adapter 32-bit, 1024 x 768
or higher resolution capable
16-bit, 800 x 600
or higher resolution capable
Sound Standard sound card Standard sound card
USB 6 available USB 2.0 Ports 4 available USB 2.0 Ports
Operating Systems (32/64-bit) Windows 10 Professional
Windows 8.1 Professional
Windows 7 ProfessionalYou can try setting up a Windows 10, 8.1 and 7 VM on the host and see if the performance is still slow.
Is it meant to be accessible via network shares?
Even worse - the vendor declares that access is through UNC path only, not a mapped network drive.. lol
-
@CCWTech what versions of SMB are enabled on the server and the clients?
-
I'm aware.
-
@dashrender said in Network setup - Hyper-V:
@CCWTech what versions of SMB are enabled on the server and the clients?
I haven't tried SMB 1 yet. Is that something that needs to be done on physical, hyper-v, and clients?
-
@ccwtech said in Network setup - Hyper-V:
@dashrender said in Network setup - Hyper-V:
@CCWTech what versions of SMB are enabled on the server and the clients?
I haven't tried SMB 1 yet. Is that something that needs to be done on physical, hyper-v, and clients?
I'm curious as to what's currently enabled?
-
So the app is fast when using local storage and slow when using network storage? Seems like a not unexpected behaviour.
-
@dashrender said in Network setup - Hyper-V:
@ccwtech said in Network setup - Hyper-V:
@dashrender said in Network setup - Hyper-V:
@CCWTech what versions of SMB are enabled on the server and the clients?
I haven't tried SMB 1 yet. Is that something that needs to be done on physical, hyper-v, and clients?
I'm curious as to what's currently enabled?
Just defaults.
Does SMB1 need to be enabled on ALL servers (Physical, Hyper-V Applications) and then all clients?
If so, can that be done when they are in production?
-
Temporary exclude the software directory and/or processes of that software from Windows Defender AV on server to see if that helps.
