Time to gut the network - thoughts?

stacksofplates

@scottalanmiller said in Time to gut the network - thoughts?:

@Dashrender said in Time to gut the network - thoughts?:

Currently my HP-2824 switch is acting as a router between my VLANs. Anyone know from experience if the Edgeswitches can do this? The specs claim they can.

Yes they can, any L3 switch can. But consider this as a good time to just remove the VLANs, too.

Do you ( @Dashrender ) have to have a DMZ for anything? Or are you completely cloud now with your EMR portal?

Jason

@stacksofplates said in Time to gut the network - thoughts?:

Ok I'm done. I'm missing time with my family.

My point was, most of the people hiring consultants don't know what good or bad advice is. Look at SW. It's a perfect example.

I was saying statements like this:

Should have walked them out the door the moment that you found out that they didn't know even the basic underpinnings of networking or phones. What value did they bring if they aren't aware of how either work?

Are kind of ridiculous. If you yourself don't understand how they work, how would you decide they don't. Which is why people on SW are in the situations they are in.

Yeah this site is going down hill fast.. all it is is threads that turn into arguments anymore.

scottalanmiller

@stacksofplates said in Time to gut the network - thoughts?:

@scottalanmiller said in Time to gut the network - thoughts?:

Put in QoS for your RTP traffic (the REAL voice traffic, not SIP),

Ah you said RDP before and I was so confused.

Whoops. Yes RTP, the Real Time Protocol.

scottalanmiller

@Dashrender said in Time to gut the network - thoughts?:

I guess I don't see the point in VLANs with no firewall rules.

Legacy understanding, and the belief (by the phone installation company) that VLANs would allow QOS for the IP phones.

Of course the use of VLANs does allow for VLAN X to have a higher QOS level, but if the switch is saturated by traffic on other VLANs, I suppose the switch should give priority to the QOS ratings, but I probably have problems to fix.

Ah, actually there is a mistake here. VLANs, as we've discussed, don't provide for QoS. That we know. But what was being mentioned here is that without firewall rules, there isn't any effective QoS at all.

QoS only ever kicks in when something is totally saturated, otherwise there is nothing to do. But the issue is that your switches are effectively never a bottleneck. If they are, fix that.

QoS exists, for all intents and purposes, for one spot only and that is the bottleneck of when the LAN hits the WAN. When it does, the QoS from the VLANing is stripped off. So if you don't have QoS where it makes a difference, what was the point of it all along?

This is the fear of VLANs, well one of them. Not only do the VLANs make things more complex, but they also hide when the QoS might have actually been completely left off. Yes, a checkbox called QoS was checked, but there isn't any useful QoS on the network if it is not handled by a rule in the router(s).

This isn't a legacy thinking problem, VLANs are not a legacy thing. It's also not legacy in other potential ways. No matter what era you go back to, VLANs were never for performance or QoS and in no era was QoS on the LAN a replacement for QoS to the WAN. This isn't a consultant that didn't "keep up" with modern thinking. This was wrong in every era, in every scenario if there was nothing on the WAN link to do the QoS there.

scottalanmiller

@Dashrender said in Time to gut the network - thoughts?:

FYI - in Q1 of 2017, the plan is to replace the digital phones with IP phones, this is the reason for the POE switches in Building 2.

Is the pure PoE because essentially every device connects "through a phone"?

Jason

I'm not sure why people use VLANS thinking it's QOS heck most of the time VoIP doesn't need QoS on the LAN until you get big anyhow..

We use VLANs for security and logical separation but if you have no ACLs then there's no security.

We use VLANs for the phones most for sanity.. We don't want to see 23,000 phone in our dang DHCP server nor pay for windows device cals for non-domain users with phones. DHCP is handled by routers for phones. Secondly, Phones are setup by a TFTP server which is handed out by DHCP. Doing this on the main network will mess with PXE boot for clients.

scottalanmiller

@Jason said in Time to gut the network - thoughts?:

We use VLANs for security and logical separation but if you have no ACLs then there's no security.

We use VLANs for the phones most for sanity.. We don't want to see 23,000 phone in our dang DHCP server nor pay for windows device cals for non-domain users with phones. DHCP is handled by routers for phones. Secondly, Phones are setup by a TFTP server which is handed out by DHCP. Doing this on the main network will mess with PXE boot for clients.

Yeah, if you are using it for management domains or whatever, totally different. Still need some amount of scale to make that makes sense, but not a crazy scale by any stretch. Even at 30 phones you might justify it, if it's because of management. But even then, you'd probably add ACLs, just for the extra security since it is so easy.

scottalanmiller

@Jason said in Time to gut the network - thoughts?:

I'm not sure why people use VLANS thinking it's QOS heck most of the time VoIP doesn't need QoS on the LAN until you get big anyhow..

This is definitely one that I can't figure out. Where the idea that QoS is needed on the LAN, needed for a normal SMB or is achieved with VLANs I can't figure out. I've never found a logical source of where this would come from.

stacksofplates

@Jason said in Time to gut the network - thoughts?:

I'm not sure why people use VLANS thinking it's QOS heck most of the time VoIP doesn't need QoS on the LAN until you get big anyhow..

We use VLANs for security and logical separation but if you have no ACLs then there's no security.

We use VLANs for the phones most for sanity.. We don't want to see 23,000 phone in our dang DHCP server nor pay for windows device cals for non-domain users with phones. DHCP is handled by routers for phones. Secondly, Phones are setup by a TFTP server which is handed out by DHCP. Doing this on the main network will mess with PXE boot for clients.

Ha ya I don't know how you gain performance in going from a LAN to a ....LAN.

Dashrender

@scottalanmiller said in Time to gut the network - thoughts?:

@Dashrender said in Time to gut the network - thoughts?:

4 Edgeswitch ES-48-500w
....
Suggestions of changes? other questions, things I should consider?

So these are all PoE? Is that necessary?

For all but the switch in the server cabinet, yes because I don't want to deal with power bricks at the phone side.

Dashrender

@scottalanmiller said in Time to gut the network - thoughts?:

Have you considered a stacked switch environment instead? I love UBNT EdgeSwitches, but I don't think that they stack as well as some alternatives, even Netgear Prosafe. Moving to a single switch stack is the standard answer for a multi-switch environment.

Three of the switches are in one building, two are in the other. Do the stacked switches work over ethernet connections? And what's the cost difference for those over the EdgeSwitch. Not to mention that I already have one HP and one Edgeswitch ( I didn't mention the other EdgeSwitch earilier because I was just planning on getting more of them, so really, I'm only buying 3, not 4). If I don't use them, I have $1500+ just sitting around - yeah sunk cost and all, but my currently approved budget (pending my confirmation from posting here) does not account for having to buy five switches. Adding two additional switches would probably increase the cost 25%+. Does it give me a bit more work, sure, do I think it will cost me more in time managing it than the cost of additional gear? no.

scottalanmiller

@Dashrender said in Time to gut the network - thoughts?:

Three of the switches are in one building, two are in the other. Do the stacked switches work over ethernet connections?

No, not really. It wouldn't be a functional stack if it did. You'd have a terrible backplane problem.

Dashrender

@scottalanmiller said in Time to gut the network - thoughts?:

If possible, I'd flatten the network ~~and stack the switches~~ as the first step. Simplicity is its own reward. Less to manage, better performance.

Yes I'd like to do that.

current VLAN setup

 VLAN 1       192.168.1.x/24       servers/PCs/printers
 VLAN 2       192.168.150.x/24     Phones (the phones are programmed to be on this VLAN
 VLAN 105     192.168.105.x/24     wireless
 VLAN 17      10.10.10.x/28        imaging
 Remote site  192.168.5.x/24       remote location (no VLAN tags)

From this information, I believe that I can expand the VLAN1 (default VLAN) to 192.168.0.x/22 without affecting any of the other VLANs and move the laptops and phones into the expanded network at my own pace, but I would have to have the VLANs active while doing so.

Comments, concerns?

Dashrender

@Dashrender said in Time to gut the network - thoughts?:

 VLAN 17      10.10.10.x/28        imaging

There is currently a plan being made to make VLAN 17 be completely independent, i.e. share no hardware with the rest of the network. This will require a ER with fiber GBIC/SFP in building 1 connected to a private MAN connection (copper based) to another client, and internally connected to the private fiber to building 2. In building two I'll have the smallest EdgeSwitch with an SFP port to plug in fiber. The devices for this network would be be plugged into this switch.
Should I use VLAN instead to deliver this of splitting it to it's own hardware? ensuring that NO traffic passes between this imaging network and my production network is critical. If the EdgeSwitch supports ACLs (which I read it does) then I should be able to do it completely with VLANs without risking my network.

Thoughts?

Dashrender

@scottalanmiller said in Time to gut the network - thoughts?:

@Dashrender said in Time to gut the network - thoughts?:

Three of the switches are in one building, two are in the other. Do the stacked switches work over ethernet connections?

No, not really. It wouldn't be a functional stack if it did. You'd have a terrible backplane problem.

LOL, yeah if backplaning is a requirement of the stack, than yeah.. that would be bad! Though I'm pretty sure I read that HP switches in the past could be centrally managed through a master switch, but the backplanes would be all internal to each switch.

in any case, having them split mostly makes the need/desire for stacking not really desired/cared about.

JaredBusch

@Dashrender said in Time to gut the network - thoughts?:

@scottalanmiller said in Time to gut the network - thoughts?:

If possible, I'd flatten the network ~~and stack the switches~~ as the first step. Simplicity is its own reward. Less to manage, better performance.

Yes I'd like to do that.

current VLAN setup
 VLAN 1       192.168.1.x/24       servers/PCs/printers
 VLAN 2       192.168.150.x/24     Phones (the phones are programmed to be on this VLAN
 VLAN 105     192.168.105.x/24     wireless
 VLAN 17      10.10.10.x/28        imaging
 Remote site  192.168.5.x/24       remote location (no VLAN tags)
From this information, I believe that I can expand the VLAN1 (default VLAN) to 192.168.0.x/22 without affecting any of the other VLANs and move the laptops and phones into the expanded network at my own pace, but I would have to have the VLANs active while doing so.

Comments, concerns?

This is how I would handle a migration to a flat network.

Dashrender

Speaking about a flat switched network - OK so my phone vendor is adamant I need QoS to ensure I don't have phone quality issues. What respectable publications can I point to that say this isn't a typical concern anymore?

Looking at you mostly @scottalanmiller

DustinB3403

@Dashrender said in Time to gut the network - thoughts?:

Speaking about a flat switched network - OK so my phone vendor is adamant I need QoS to ensure I don't have phone quality issues. What respectable publications can I point to that say this isn't a typical concern anymore?

Looking at you mostly @scottalanmiller

I would say every source would insist you have QoS enabled.

Not the other way around...

Dashrender

@DustinB3403 said in Time to gut the network - thoughts?:

@Dashrender said in Time to gut the network - thoughts?:

Speaking about a flat switched network - OK so my phone vendor is adamant I need QoS to ensure I don't have phone quality issues. What respectable publications can I point to that say this isn't a typical concern anymore?

Looking at you mostly @scottalanmiller

I would say every source would insist you have QoS enabled.

Not the other way around...

OK that's fine to - guides/recommendations for that setup? Focusing specifically on the switches.

JaredBusch

@Dashrender said in Time to gut the network - thoughts?:

Speaking about a flat switched network - OK so my phone vendor is adamant I need QoS to ensure I don't have phone quality issues. What respectable publications can I point to that say this isn't a typical concern anymore?

Looking at you mostly @scottalanmiller

You vendor is 100% correct in that statement as you just typed it. You are required to use QoS on all switches and routers in your control to ensure quality.

The point you glossed here is that you need said QoS on the traffic not an entire VLAN. Every reputable SIP device uses DSCP tagging. So what you would do is set QoS on DSCP 46 (RTP the voice) and 26 (SIP the signaling) traffic.

Those examples are what my Yealink phones use by default to communicate to the FreePBX server and is the traffic going out my WAN.

You generally will never see QoS applied on your switch unless a port is saturated.

You will see the QoS applied all the time on your routers assuming you are decently normal. It gets hit in spikes most of the time, not consistently.