Redoing Home Network
-
@jt1001001 said in Redoing Home Network:
@scottalanmiller wouldn't use use firewall rules to separate the traffic? (either separate firewall or rues in router if we're using a router/firewall combo,and yes I know today firewall/router are essentially the same thing)
No, the traffic is still mixed in the router. "Separating traffic" is never a thing. What is a thing is "ability to attack each other". You already do that, right? You have firewalls on each device to already limit what device can talk to each other.
The VLAN + Firewall combination is only ever a secondary security tool to do a very rudimentary duplication of what should already exist on a per machine basis. That doesn't make it bad, we just have to be realistic. It's not about separating traffic (that's done in the switch on every network anywhere), nor about providing a block to attacks, it's about attempting to block an attack on another layer of attack blocking.
-
@scottalanmiller Ok appreciate the video. That was enlightening. Half of what I studied is probably wrong lol. I didn't realize that cert was so bad, or I would have just skipped it entirely. Their blanket statements about things definitely caused me to make some bad decisions. However, I should have dug deeper into the material. I just figured I would encounter deeper info in later certs. So, thanks for the explanation!
-
@jmoore said in Redoing Home Network:
@scottalanmiller Ok appreciate the video. That was enlightening. Half of what I studied is probably wrong lol. I didn't realize that cert was so bad, or I would have just skipped it entirely. Their blanket statements about things definitely caused me to make some bad decisions. However, I should have dug deeper into the material. I just figured I would encounter deeper info in later certs. So, thanks for the explanation!
So in what situation do vlans make the most sense and what is their purpose there? Just security to keep machines from talking to each other?
-
@jmoore said in Redoing Home Network:
@scottalanmiller Ok appreciate the video. That was enlightening. Half of what I studied is probably wrong lol. I didn't realize that cert was so bad, or I would have just skipped it entirely. Their blanket statements about things definitely caused me to make some bad decisions. However, I should have dug deeper into the material. I just figured I would encounter deeper info in later certs. So, thanks for the explanation!
CompTIA doesn't do later certs, as those would require, you know, hiring IT people that actually know material lol
-
@jmoore said in Redoing Home Network:
So in what situation do vlans make the most sense and what is their purpose there? Just security to keep machines from talking to each other?
Correct, that is essentially their only function. In some extreme cases, they can be used to isolate broadcast traffic, or to do "LAN level" performance tweaking, but most of that is just ridiculous in practice. Nearly the only legitimate role of VLANs is to provide isolation containers for networks.
That means.... provide the isolation one gets from isolated, dedicated hardware, but without the physical performance benefits of having isolated hardware (or the cost.)
-
@jmoore said in Redoing Home Network:
@jmoore said in Redoing Home Network:
@scottalanmiller Ok appreciate the video. That was enlightening. Half of what I studied is probably wrong lol. I didn't realize that cert was so bad, or I would have just skipped it entirely. Their blanket statements about things definitely caused me to make some bad decisions. However, I should have dug deeper into the material. I just figured I would encounter deeper info in later certs. So, thanks for the explanation!
So in what situation do vlans make the most sense and what is their purpose there? Just security to keep machines from talking to each other?
Correct. Here is an ER-4 at a client.
- eth0 = WAN
- eth1 = Unused
- was LAN until I moved it to eth3 (SFP)
- eth2 = Credit card machine.
- Outbound NAT makes it X.X.X.138
- This could easily have been a VLAN if needed, but I had the extra port, meh.
- eth3 = LAN & WiFi
- Outbound NAT makes it X.X.X.138
- eth3.10 = Guest WiFi
- Outbound NAT makes it X.X.X.140
- eth3.20 = IoT shit
- Outbound NAT makes it X.X.X.140
None of the local subnets are allowed to talk to each other by firewall rules.
-
@Grey said in Redoing Home Network:
The Ubiquiti USG can handle 1gig connections without a problem.
The original USG most certainly cannot handle it if you have traffic shaping or QoS or a number of other things that kill offloading.
-
@Grey said in Redoing Home Network:
Either get an AP that matches the rest of the system, or get the rest of the Ubiquiti equipment.
FFS, are you on crack?
EdgeMax is Ubiquiti equipment.
The EdgeMax line has no wireless at all. So you have to provide a separate device for an access point.
-
@JaredBusch Ok thanks for the sample config. I see what your talking about with the rules.
-
@JaredBusch said in Redoing Home Network:
None of the local subnets are allowed to talk to each other by firewall rules.
This is the scenario I think of when you want (need?) to isolate and segment LAN traffic, yet each segment needs Internet access and you have only one WAN connection.
-
-
-
Thanks Scott for all these videos. You cleared up a lot of actual and implied questions, along with correcting my erroneous thought process. Much appreciated. I'll be questioning things I read much more now.
-
@JaredBusch said in Redoing Home Network:
@Grey said in Redoing Home Network:
Either get an AP that matches the rest of the system, or get the rest of the Ubiquiti equipment.
FFS, are you on crack?
EdgeMax is Ubiquiti equipment.
The EdgeMax line has no wireless at all. So you have to provide a separate device for an access point.
Ok, I should have been more clear in that. I wouldn't go to a product line that not designed for home use.
-
@Grey said in Redoing Home Network:
@JaredBusch said in Redoing Home Network:
@Grey said in Redoing Home Network:
Either get an AP that matches the rest of the system, or get the rest of the Ubiquiti equipment.
FFS, are you on crack?
EdgeMax is Ubiquiti equipment.
The EdgeMax line has no wireless at all. So you have to provide a separate device for an access point.
Ok, I should have been more clear in that. I wouldn't go to a product line that not designed for home use.
I'm the opposite. I won't use anything meant for "home" use. Home equipment is always low quality and marketed to consumers, nothing good is sold that way. Everything good in IT is targeted at discerning IT pros. That's where you'll find the best quality and best options, because it's the only market where people are actually evaluating both the price and the features/quality rather than just buying based on ads or sales.
-
@scottalanmiller I'm the same way, I get that habit from my Av days. I bought Allen & Heath mixing boards, QSC amps, and small Community speakers. This is all professional equipment and it had more options and lasted a lot longer. In fact all those pieces are still working today.
-
@jmoore said in Redoing Home Network:
@scottalanmiller I'm the same way, I get that habit from my Av days. I bought Allen & Heath mixing boards, QSC amps, and small Community speakers. This is all professional equipment and it had more options and lasted a lot longer. In fact all those pieces are still working today.
Yup, I can from the audiophile world, too. And it was often cheaper to get hifi gear than to get the crappy, sounds horrible consumer junk.
