Meraki Bells and Whistles
-
@Dashrender said in Datto AP60:
OK that makes sense... But managing 20 firewalls (one after each AP) yet keeping the network flat sounds HUGELY painful at min.. where the Meraki interface handles that all for you.
It would be a huge pain in the ass, but why do you feel the identical situation is easy with Meraki and hard with Unifi? It's a pain equally in both cases. Remember, we just established that it's a name game with Meraki and that technically there are 20 firewalls there just like with the Unifi. In both cases you have a site manager and a single pain of glass, but in both cases you are choosing to deploy twenty individual firewalls all throughout your wireless (but not wired) network.
No matter how you slice it, that's a crazily complex situation that Meraki has no way to fix over Unifi.
-
@Dashrender said in Datto AP60:
we did? when? you said performance and command line flexibility - which has nothing to do with APs, but the the whole Meraki line in general.
All choices about a unified network system is about the system in general.
-
@Dashrender said in Datto AP60:
The Unifi line (SPoG) also doesn't have commandline
Ours does. Doesn't yours? We use it all the time.
-
@Dashrender said in Datto AP60:
SPoG
Spog:
An absolute fricking spagbole who is mentally special and wants to suck on everyone’s toesIs that what you meant?
Ha. now I get it. Single Pane of Glass.
-
@scottalanmiller said in Datto AP60:
@Dashrender said in Datto AP60:
OK that makes sense... But managing 20 firewalls (one after each AP) yet keeping the network flat sounds HUGELY painful at min.. where the Meraki interface handles that all for you.
It would be a huge pain in the ass, but why do you feel the identical situation is easy with Meraki and hard with Unifi? It's a pain equally in both cases. Remember, we just established that it's a name game with Meraki and that technically there are 20 firewalls there just like with the Unifi. In both cases you have a site manager and a single pain of glass, but in both cases you are choosing to deploy twenty individual firewalls all throughout your wireless (but not wired) network.
No matter how you slice it, that's a crazily complex situation that Meraki has no way to fix over Unifi.
Because with Meraki - it's a point and click set of changes... Even with a total Unif situation there wouldn't be the ease of finding said AP and simply clicking to change a setting... but again - someone it's actually all that likely to do this - so it's mostly a moot point.
-
@Dashrender said in Datto AP60:
@scottalanmiller said in Datto AP60:
@Dashrender said in Datto AP60:
What? Meraki has devices for all the network components - APs, Switches and Firewalls - sounds like a single pain of glass to me.
You are totally missing the big picture. THOSE get replaced because of complexity. It was you who singled out the AP apart from the rest of the solution. When those complex pieces get replaced because you need the power and flexibility of Ubiquiti, then you have to replace the Meraki APs to get a single pain of glass.
I honestly don't even know what you are talking about anymore.
I'm not sure how you are confused. You ask why UBNT over Meraki, YOU asked. I explained. Then you asked about APs, rather than the network at large, which should have been obvious, but I explained. It's only complex because you are struggling to make Merakis sound viable. But because they are not, that's failing, but you are trying to pick apart the network to find a place that they do something of value.
They just don't. I've done this a long time. They were good when they were the only game. Now they are a lame, poorly designed product compared to the field. Just accept that and stop trying to make them seem good.
-
@DustinB3403 said in Datto AP60:
@Dashrender said in Datto AP60:
SPoG
Spog:
An absolute fricking spagbole who is mentally special and wants to suck on everyone’s toesIs that what you meant?
Single Pain of Glass
-
@Dashrender said in Datto AP60:
@scottalanmiller said in Datto AP60:
@Dashrender said in Datto AP60:
OK that makes sense... But managing 20 firewalls (one after each AP) yet keeping the network flat sounds HUGELY painful at min.. where the Meraki interface handles that all for you.
It would be a huge pain in the ass, but why do you feel the identical situation is easy with Meraki and hard with Unifi? It's a pain equally in both cases. Remember, we just established that it's a name game with Meraki and that technically there are 20 firewalls there just like with the Unifi. In both cases you have a site manager and a single pain of glass, but in both cases you are choosing to deploy twenty individual firewalls all throughout your wireless (but not wired) network.
No matter how you slice it, that's a crazily complex situation that Meraki has no way to fix over Unifi.
Because with Meraki - it's a point and click set of changes... Even with a total Unif situation there wouldn't be the ease of finding said AP and simply clicking to change a setting... but again - someone it's actually all that likely to do this - so it's mostly a moot point.
Simply wrong. You are imaging Meraki to be magic. It's not. The effort is identical.
-
-
@Dashrender said in Datto AP60:
Because with Meraki - it's a point and click set of changes...
Okay but why didn't you say....
"Because with Unifi, it's a point and click set of changes..."
Why did you say it about one but not the other when they both do that?
-
@Dashrender said in Datto AP60:
Even with a total Unif situation there wouldn't be the ease of finding said AP and simply clicking to change a setting...
Why not? Why is finding one firewall on Meraki easy in your mind but hard on Unifi?
I think you've decided that all Meraki tasks are easy and all Unifi tasks are hard without having used them. You are injecting obviously false assumptions into the discussion. But not just false assumptions, ones we already addressed before hand. This would be a huge mess on any system, we already said Meraki can't handle this gracefully either. Managing 20 firewalls is a mess no matter what tool you use, but Unifi can do this just like Meraki can... but with more power and less cost.
-
@Dashrender said in Datto AP60:
@scottalanmiller said in Datto AP60:
@Dashrender said in Datto AP60:
OK that makes sense... But managing 20 firewalls (one after each AP) yet keeping the network flat sounds HUGELY painful at min.. where the Meraki interface handles that all for you.
It would be a huge pain in the ass, but why do you feel the identical situation is easy with Meraki and hard with Unifi? It's a pain equally in both cases. Remember, we just established that it's a name game with Meraki and that technically there are 20 firewalls there just like with the Unifi. In both cases you have a site manager and a single pain of glass, but in both cases you are choosing to deploy twenty individual firewalls all throughout your wireless (but not wired) network.
No matter how you slice it, that's a crazily complex situation that Meraki has no way to fix over Unifi.
Because with Meraki - it's a point and click set of changes... Even with a total Unif situation there wouldn't be the ease of finding said AP and simply clicking to change a setting... but again - someone it's actually all that likely to do this - so it's mostly a moot point.
....Have you ever used Unifi networking equipment?
-
@scottalanmiller said in Datto AP60:
@Dashrender said in Datto AP60:
@scottalanmiller said in Datto AP60:
@Dashrender said in Datto AP60:
What? Meraki has devices for all the network components - APs, Switches and Firewalls - sounds like a single pain of glass to me.
You are totally missing the big picture. THOSE get replaced because of complexity. It was you who singled out the AP apart from the rest of the solution. When those complex pieces get replaced because you need the power and flexibility of Ubiquiti, then you have to replace the Meraki APs to get a single pain of glass.
I honestly don't even know what you are talking about anymore.
I'm not sure how you are confused. You ask why UBNT over Meraki, YOU asked. I explained. Then you asked about APs, rather than the network at large, which should have been obvious, but I explained. It's only complex because you are struggling to make Merakis sound viable. But because they are not, that's failing, but you are trying to pick apart the network to find a place that they do something of value.
you took a conversation that was about APs and then suddenly started talking about unified systems - that's where this took a left turn. I stated focused soley on APs, and you branched it to everything.. sure I talked about features that are firewall features - but they are still part of the AP in Meraki - so you wanting to confuse the issue by splitting them out is what I see... now sure - you can say.. the Meraki AP is a firewall and AP all in one - and the UBNT doesn't offer that. Fine - say that...
And I'm not defending Meraki here - just trying to find what actual problems you've had to justify replacing them while the maintenance contract is still valid - once it's coming for renewal - hell yeah, rip that shit out!
-
@coliver said in Datto AP60:
@Dashrender said in Datto AP60:
@scottalanmiller said in Datto AP60:
@Dashrender said in Datto AP60:
OK that makes sense... But managing 20 firewalls (one after each AP) yet keeping the network flat sounds HUGELY painful at min.. where the Meraki interface handles that all for you.
It would be a huge pain in the ass, but why do you feel the identical situation is easy with Meraki and hard with Unifi? It's a pain equally in both cases. Remember, we just established that it's a name game with Meraki and that technically there are 20 firewalls there just like with the Unifi. In both cases you have a site manager and a single pain of glass, but in both cases you are choosing to deploy twenty individual firewalls all throughout your wireless (but not wired) network.
No matter how you slice it, that's a crazily complex situation that Meraki has no way to fix over Unifi.
Because with Meraki - it's a point and click set of changes... Even with a total Unif situation there wouldn't be the ease of finding said AP and simply clicking to change a setting... but again - someone it's actually all that likely to do this - so it's mostly a moot point.
....Have you ever used Unifi networking equipment?
He's had to, he setup an AP for wrcombs so he must know how the general interface looks and works.
-
@DustinB3403 said in Datto AP60:
Anyways back to the OP, @WrCombs since your boss brought in a physical device, she needs to provide credentials into the management environment so you can set this up to run the SSID you need.
How/where you get into that cloud I don't have an answer.
Yeah, that part is simple, just tell her to log in and show you how to access it. Don't let her hand it over without showing that it works and how to get in. Problem will solve itself.
-
@scottalanmiller said in Datto AP60:
@Dashrender said in Datto AP60:
Because with Meraki - it's a point and click set of changes...
Okay but why didn't you say....
"Because with Unifi, it's a point and click set of changes..."
Why did you say it about one but not the other when they both do that?
Because with Unifi - I have to manage two pieces of equipment to get that info.
-
@Dashrender said in Datto AP60:
@scottalanmiller said in Datto AP60:
@Dashrender said in Datto AP60:
Because with Meraki - it's a point and click set of changes...
Okay but why didn't you say....
"Because with Unifi, it's a point and click set of changes..."
Why did you say it about one but not the other when they both do that?
Because with Unifi - I have to manage two pieces of equipment to get that info.
So you want a SPoF?
-
@Dashrender said in Datto AP60:
you took a conversation that was about APs and then suddenly started talking about unified systems
Yes, because it's a discussion about Datto (and Meraki and Unifi) which are unified systems. If you mention an AP in that context, the value and functionality are a sub-component of the overall system.
I didn't change the conversation, I answered what was asked. In an attempt to pick it apart, you started trying to isolate components to try to make a sensible conversation not make sense.
Let's make it simple: "Is a Meraki AP a good idea?"
Answer: "No, because it is part of an ecosystem that when taken holistically doesn't make sense altogether, or separately as individual components."
If that isn't good enough for you, which is wasn't, and you have to pick apart every possible combination of features, then you need to keep the context straight because you are the one trying to argue that there is value in the Meraki, but haven't shown any.
-
@Dashrender said in Datto AP60:
@scottalanmiller said in Datto AP60:
@Dashrender said in Datto AP60:
Because with Meraki - it's a point and click set of changes...
Okay but why didn't you say....
"Because with Unifi, it's a point and click set of changes..."
Why did you say it about one but not the other when they both do that?
Because with Unifi - I have to manage two pieces of equipment to get that info.
And we covered this, labeling it one thing in Meraki doesn't change that it is two components. Are you not reading anything I'm writing? Use some duct tape with the Unifi, use a label maker, call it the "Unifi FWAP". Ta da. Two functions in one unit. All solved, kicks Meraki's ass. Done.
-
@dbeato - What would it take to get creds for the management interface?
