Exploring VitalPBX

JaredBusch

@scottalanmiller said in Exploring VitalPBX:

@andrewbyrd70 said in Exploring VitalPBX:

@JaredBusch I am using Vultr VPS - no firewall issues. I have 10 vps servers with Vultr running Freepbx for different clients. Never had a firwall issue thus far.

FreePBX uses a different firewall than VitalPBX does. They use the same IPS, but different firewall styles. VitalPBX uses a plain firewall, and FreePBX uses responsive. They behave differently.

That he registers means the problem is not on that side firewall.

scottalanmiller

@andrewbyrd70 said in Exploring VitalPBX:

Accept my spanking.

https://i.imgflip.com/1n4h20.jpg

andrewbyrd70

I love your sense of humor Scott - Going to get a beer now

JaredBusch

First, you need to figure out WTF you are doing wrong.

VitalPBX is Asterisk. Asterisk has all the answers.

First show the registratoin info.

rasterisk -x "pjsip show aor 1001"

or

asterisk -rx "pjsip show aor 1001"

JaredBusch

and this

rasterisk -x "pjsip show endpoint 1001"

andrewbyrd70

OR I could just stick with what has worked for the past 5 years - FREEPBX. I am all about ease of setup and use.
It Vitalpbx wants me to change multiple settings and dance on one foot to get their product to work I don't need it. I can fire up a Freepbx server right now and have it working and ready to go in half an hour or less.
The only reason I explored Vitalpbx is for a client for multi-tenant.

I do thank you for the suggestions, criticisms and insights though. You gave this to me freely and I do appreciate that - I really do.

scottalanmiller

@andrewbyrd70 said in Exploring VitalPBX:

The only reason I explored Vitalpbx is for a client for multi-tenant.

While they support that, I'm not sure that it looks very interesting. FusionPBX is way more interesting for that kind of functionality, IMHO.

JaredBusch

@andrewbyrd70 said in Exploring VitalPBX:

OR I could just stick with what has worked for the past 5 years - FREEPBX. I am all about ease of setup and use.
It Vitalpbx wants me to change multiple settings and dance on one foot to get their product to work I don't need it. I can fire up a Freepbx server right now and have it working and ready to go in half an hour or less.
The only reason I explored Vitalpbx is for a client for multi-tenant.

I do thank you for the suggestions, criticisms and insights though. You gave this to me freely and I do appreciate that - I really do.

If you think FreePBX was easy the first time, then you have rose colored glasses on. take them off.

FreePBX is certainly not simple or straight forward to get right for a beginner.

Honestly, IMO, VitalPBX and FreePBX are about the same in that regard. The VitalPBX GUI is tons more friendly, but the settings and options are the same in both systems.

scottalanmiller

That said, I'm not a multi-tenant guy, I'm a single tenant engineer these days. So maybe Vital does something great there, but building multi-tenant on Asterisk seems like a nightmare.

JaredBusch

@scottalanmiller said in Exploring VitalPBX:

@andrewbyrd70 said in Exploring VitalPBX:

The only reason I explored Vitalpbx is for a client for multi-tenant.

While they support that, I'm not sure that it looks very interesting. FusionPBX is way more interesting for that kind of functionality, IMHO.

Correct. I would never recommend any thing base don Asterisk for a multi-tenant deployment. It was never not designed for it.

JaredBusch

@scottalanmiller said in Exploring VitalPBX:

That said, I'm not a multi-tenant guy, I'm a single tenant engineer these days. So maybe Vital does something great there, but building multi-tenant on Asterisk seems like a nightmare.

It is all prefixing. Nothing special, but crazy to maintain.

andrewbyrd70

I agree that Fusionpbx is a better multi-tenant solution. I have a server with Vultr running Fusionpbx and has for over 6 months with very little issues. It went into production 3 months ago and has been a great solution for 3 of my clients. Just my 2 cents. . . .

JaredBusch

Closed source is my #1 complaint about VitalPBX.

This is why:

I absolutely use custom contexts on almost all systems. Typically only one or two simple things. But they are things that make Asterisk so much more friendly IMO.

Asterisk is open source, and the structure of adding custom dialplan into contexts is freely available. But VitalPBX locks this out by not having a way to include custom contexts by default.

Examples of some I use with this pjsip send notify:
Reload, but do not reboot a Yealink Phone:

[reload-yealink]
Event=>check-sync\;reboot=false

Force reboot a Yealink Phone

[restart-yealink]
Event=>check-sync\;reboot=true

Send a command to a Yealink phone to turn on DND

[dndon-yealink]
Content-Type=>message/sipfrag
Event=>ACTION-URI
Content=>key=DNDOn

Send a command to a Yealink phone to turn off DND

[dndoff-yealink]
Content-Type=>message/sipfrag
Event=>ACTION-URI
Content=>key=DNDOff

Send a command to a Yealink phone to factory reset it

[default-yealink]
Content-Type=>message/sipfrag
Event=>ACTION-URI
Content=>key=Reset

That does not even get into simple basic custom dialplan for actual call routing things.

JaredBusch

That last one works awesome when you have DHCP options setup to point a phone when it boots.

1337

@JaredBusch
Off topic, but I haven't seen those 1-2-3 options on our T42 phones.
What is that? Is it to switch banks of BLF buttons or something like that?

JaredBusch

@Pete-S said in Exploring VitalPBX:

@JaredBusch
Off topic, but I haven't seen those 1-2-3 options on our T42 phones.
What is that? Is it to switch banks of BLF buttons or something like that?

Yes. The T42G has 6 physical buttons, but you can program up to 15 DSS keys on those 6 buttons.

If you use more than 1-6, button 6 becomes 1 - 2 or 1 -2 - 3 depending on which ones you have setup.

In this case I have buttons DSS keys 1as a line button, 2 as a BLF to my extension, and 14 and 15 set as line buttons, nothing else on any DSS key.

1337

@JaredBusch said in Exploring VitalPBX:

@Pete-S said in Exploring VitalPBX:

@JaredBusch
Off topic, but I haven't seen those 1-2-3 options on our T42 phones.
What is that? Is it to switch banks of BLF buttons or something like that?

Yes. The T42G has 6 physical buttons, but you can program up to 15 DSS keys on those 6 buttons.

If you use more than 1-6, button 6 becomes 1 - 2 or 1 -2 - 3 depending on which ones you have setup.

In this case I have buttons DSS keys 1as a line button, 2 as a BLF to my extension, and 14 and 15 set as line buttons, nothing else on any DSS key.

OK, so it's automatically handled by the phones firmware then.

JaredBusch

@andrewbyrd70 said in Exploring VitalPBX:

OR I could just stick with what has worked for the past 5 years - FREEPBX. I am all about ease of setup and use.
It Vitalpbx wants me to change multiple settings and dance on one foot to get their product to work I don't need it. I can fire up a Freepbx server right now and have it working and ready to go in half an hour or less.
The only reason I explored Vitalpbx is for a client for multi-tenant.

I do thank you for the suggestions, criticisms and insights though. You gave this to me freely and I do appreciate that - I really do.

So, I spun up VitalPBX again (so easy, this part I love).
Made a PJSIP extension, looky look. It is showing the internal IP. So of course the PBX cannot send a call back to it.

Had you done what I asked, we probably would see this. This is a configuration on your part in the PBX.

andrewbyrd70

@JaredBusch Something has changed. On previous versions of vitalpbx you could spin it up and instantly connect without showing the internal IP. In the most current version 2.3.6 something change to where something has to be adjusted. Where would I go in vitalpbx to fix this?

JaredBusch

I changed the default PJSIP profile to this and it now registers correctly.