Windows restore from system image (Windows 7 Professional)
-
@g-i-jones said in Windows restore from system image (Windows 7 Professional):
I then pulled the old HDD out, and put in it's place the new HDD with the image I created,
I don't follow exactly what you did here.
You removed the old drive, check
you installed the new drive, checkwhen and how did you create an image, and how did you put it on the new disk?
-
For this specific situation, I would boot the computer with the original drive attached to SATA 0, the new drive on SATA 1, and boot to Clonezilla.
Use Clonezilla to clone the old drive to the new drive.
Shut down the computer, remove the old drive, move the new drive to SATA 0, and boot. Windows shouldn't even know the drive changed - with the possible exception that the size of the drive changed.
-
Alternatively, you can boot the computer from Clonezilla with only the old drive installed, then save an image of the old drive to a NAS/other PC, etc.
Then swap out the old drive for the new one, and again boot from Clonezilla, pull the image onto the new drive, then reboot - again, windows might notice it's on a difference sized drive, might not.
-
I'm not sure that Windows backup can backup an image to another drive, i.e. clone drive to drive.
Instead, the Windows backup creates an image file of the drive. This is likely what you have on the new drive. By default, Windows can't boot from that image file. You now need to move that image file to a different piece of media (a memory stick large enough to hold it, another HDD, etc). Then attach both the new(replacement) drive and the device holding the image to the computer, boot from recovery, choose your backup image, and you can then pick where to restore it.
As it likely stands now, you are picking the image to be restored, but since that image is on the only HDD in the system, it can't restore over the top of itself.
-
@dashrender I plugged the new HDD in using a USB 3.0 to 2.5" SATA III Hard Drive Adapter Cable. Made an image from Backup and Restore>Create a system image just this morning. Then I physically removed the old one from inside the tower and replaced it with the new one.
I will give clonezilla a try, thanks.
-
Yes but the time to try taking a backup is not when the HDD is in a failed state. Any backup tool might struggle to properly take an image of a failing disk.
Anyway. You need three drives, the old failing, a backup target and the new one.
The order should be.
Create rescue DVD on a working Win-7 machine.
Take image via Windows backup to a third HDD
Install Windows 7 on new HDD
Then restore from the backup. -
@breffni-potter said in Windows restore from system image (Windows 7 Professional):
Anyway. You need three drives, the old failing, a backup target and the new one.
If you are making an image, see my third post.
You only need two if you are making a direct clone, as mentioned in my second post.
-
Use Veeam Agent for Windows. Entirely free.
- Install.
- Create Recovery Image.
- Backup to USB.
- Remove failing HDD, add new HDD.
- Boot to Bootable USB with the Veeam Recovery Image applied (Rufus is good for that - also free).
- Inset restore USB and select it in Veeam Recovery.
- Let it recover...
- Done!
Easy. Works time after time.
-
@jimmy9008 said in Windows restore from system image (Windows 7 Professional):
Use Veeam Agent for Windows. Entirely free.
- Install.
- Create Recovery Image.
- Backup to USB.
- Remove failing HDD, add new HDD.
- Boot to Bootable USB with the Veeam Recovery Image applied (Rufus is good for that - also free).
- Inset restore USB and select it in Veeam Recovery.
- Let it recover...
- Done!
Easy. Works time after time.
Just for clarification - this is a three drive solution as well.
-
Maybe the system image restored failed due to errors found in the failing HDD.
Why dont you just backup the data of files in :
C:\Users
And the other drives besides C using a light Linux Live OS (Gparted) or WIndows recovery enviroment.
And take his browser profile, and bookmarks.Thats what most users need anyway.
Installing Windows 7 or any windows from scratch takes 5-10 mins on good machines and 15-20 on slow ones. then restore the data.
-
@emad-r Yeah, I learned that there isn't any specific software he needs, so I'm just going to literally copy his user folder and maybe the Pictures, Documents, and Music folders onto a thumb drive, give him a newer tower with a fresh 7 install and just drag and drop that over. Was still nice getting all these avenues of approach.
-
@dashrender said in Windows restore from system image (Windows 7 Professional):
@jimmy9008 said in Windows restore from system image (Windows 7 Professional):
Use Veeam Agent for Windows. Entirely free.
- Install.
- Create Recovery Image.
- Backup to USB.
- Remove failing HDD, add new HDD.
- Boot to Bootable USB with the Veeam Recovery Image applied (Rufus is good for that - also free).
- Inset restore USB and select it in Veeam Recovery.
- Let it recover...
- Done!
Easy. Works time after time.
Just for clarification - this is a three drive solution as well.
Veeam Agent won't care how many drives. You do the backup and image. Replace one, two or all three. Won't matter.
-
@emad-r said in Windows restore from system image (Windows 7 Professional):
Maybe the system image restored failed due to errors found in the failing HDD.
Why dont you just backup the data of files in :
C:\Users
And the other drives besides C using a light Linux Live OS (Gparted) or WIndows recovery enviroment.
And take his browser profile, and bookmarks.Thats what most users need anyway.
Installing Windows 7 or any windows from scratch takes 5-10 mins on good machines and 15-20 on slow ones. then restore the data.
Really? When was the last time you install Windows 7? It took over 5 hours to install all the updates.
-
@dashrender yea, those updates are ruthless for sure. Good point.
-
@jimmy9008 said in Windows restore from system image (Windows 7 Professional):
@dashrender said in Windows restore from system image (Windows 7 Professional):
@jimmy9008 said in Windows restore from system image (Windows 7 Professional):
Use Veeam Agent for Windows. Entirely free.
- Install.
- Create Recovery Image.
- Backup to USB.
- Remove failing HDD, add new HDD.
- Boot to Bootable USB with the Veeam Recovery Image applied (Rufus is good for that - also free).
- Inset restore USB and select it in Veeam Recovery.
- Let it recover...
- Done!
Easy. Works time after time.
Just for clarification - this is a three drive solution as well.
Veeam Agent won't care how many drives. You do the backup and image. Replace one, two or all three. Won't matter.
That's not what I mean.
To use Veeam - you need three total drives.
drive 1 - original
drive 2 - place to store the backup image (you can use any number of different software packages to do this)
drive 3 - replacement drive that you will restore the image onto.This is what my third post suggests, just using Clonezilla instead of Veeam, and @Breffni-Potter mentioned.
-
@g-i-jones said in Windows restore from system image (Windows 7 Professional):
@emad-r Yeah, I learned that there isn't any specific software he needs, so I'm just going to literally copy his user folder and maybe the Pictures, Documents, and Music folders onto a thumb drive, give him a newer tower with a fresh 7 install and just drag and drop that over. Was still nice getting all these avenues of approach.
Why are you giving them Windows 7? You can upgrade that machine to Windows 10 for free, why keep them on old stuff?
-
@dashrender I don't call the shots on that. I personally like 10, but everything we have at our organization is build on or with Windows 7 in mind. Plus, most of our users are older folk that if you threw a new OS at them, they would be calling me for every minor task because they hardly know how to set up a print job as it is.
-
Really? When was the last time you install Windows 7? It took over 5 hours to install all the updates.
In I.T bench world, you can tick the option to install updates automatically, and give the client the machine and it will install updates by itself. No one has to babysit the whole thing (unless you really love that person you are helping).
Also I love system image modder by the name of murphy78, what he does is incorporates Windows 7 updates in the base installation image, without corrupting anything (and I trust him after following many of his releases).
-
@emad-r I'm gonna have to look into that, that's highly interesting, thanks for sharing.
-
@dashrender said in Windows restore from system image (Windows 7 Professional):
@jimmy9008 said in Windows restore from system image (Windows 7 Professional):
@dashrender said in Windows restore from system image (Windows 7 Professional):
@jimmy9008 said in Windows restore from system image (Windows 7 Professional):
Use Veeam Agent for Windows. Entirely free.
- Install.
- Create Recovery Image.
- Backup to USB.
- Remove failing HDD, add new HDD.
- Boot to Bootable USB with the Veeam Recovery Image applied (Rufus is good for that - also free).
- Inset restore USB and select it in Veeam Recovery.
- Let it recover...
- Done!
Easy. Works time after time.
Just for clarification - this is a three drive solution as well.
Veeam Agent won't care how many drives. You do the backup and image. Replace one, two or all three. Won't matter.
That's not what I mean.
To use Veeam - you need three total drives.
drive 1 - original
drive 2 - place to store the backup image (you can use any number of different software packages to do this)
drive 3 - replacement drive that you will restore the image onto.This is what my third post suggests, just using Clonezilla instead of Veeam, and @Breffni-Potter mentioned.
Yes, makes sense. Read what you typed differently.
