ASUS gets their butt handed to them by the feds
-
@NattNatt said:
Yup, just got PlusNets "new" supposed top class router...its horrible, cant assign IP's to MAC's, can't setup multiple SSID's or change anything I want to...all I have is change SSID name, decide whether its dual band (2.4 and 5GHz) or to split them, change the DHCP pool range and...thats about it...
Using their device is like letting the fox in the henhouse - I'd disable as much functionality as possible, install my own ERX behind theirs.. and my own AP behind the ERX.
Now you can have whatever you want settings wise, config, etc. -
I don't use Comcast equipment. I bought my own modem for like $70 and use that. Theirs sucked and you had to pay extra or some nonsense for bridging.
-
@Dashrender said:
@NattNatt said:
Yup, just got PlusNets "new" supposed top class router...its horrible, cant assign IP's to MAC's, can't setup multiple SSID's or change anything I want to...all I have is change SSID name, decide whether its dual band (2.4 and 5GHz) or to split them, change the DHCP pool range and...thats about it...
Using their device is like letting the fox in the henhouse - I'd disable as much functionality as possible, install my own ERX behind theirs.. and my own AP behind the ERX.
Now you can have whatever you want settings wise, config, etc.Yeah, I'm just saving up and debating what to get....
-
@johnhooks said:
I don't use Comcast equipment. I bought my own modem for like $70 and use that. Theirs sucked and you had to pay extra or some nonsense for bridging.
TWC does the same thing. I bought a decent DOCSIS 3 modem from the local big chain store. Much better then the one the tech was trying to install. They wanted to charge me an arm and a leg for the rental too.
-
@coliver said:
@johnhooks said:
I don't use Comcast equipment. I bought my own modem for like $70 and use that. Theirs sucked and you had to pay extra or some nonsense for bridging.
TWC does the same thing. I bought a decent DOCSIS 3 modem from the local big chain store. Much better then the one the tech was trying to install. They wanted to charge me an arm and a leg for the rental too.
Ya it was like $5-10 a month for that junk.
-
I had a DOCSIS 2 which was working fine at our place in FL, but when we moved back they wouldn't let me use it. I only have 30 down and 3 up so speed wasn't affected. I don't know why I couldn't use it.
-
@johnhooks Because they want to charge you that rental fee for their piece of equipment.
-
@DustinB3403 said:
@johnhooks Because they want to charge you that rental fee for their piece of equipment.
Ha they didn't get it anyway. I just went and bought one for cheaper.
-
@johnhooks said:
I don't use Comcast equipment. I bought my own modem for like $70 and use that. Theirs sucked and you had to pay extra or some nonsense for bridging.
I'm not sure about Comcast - but with Cox use theirs, use yours, doesn't matter, they have full control over the device. You give them a serial number, and there must be carrier level default username and passwords on it because Cox is who manages the thing.
I would personally never use a cable modem/ADSL all in one router device. I just don't want the ISP inside my private network.
-
@Dashrender said:
@johnhooks said:
I don't use Comcast equipment. I bought my own modem for like $70 and use that. Theirs sucked and you had to pay extra or some nonsense for bridging.
I'm not sure about Comcast - but with Cox use theirs, use yours, doesn't matter, they have full control over the device. You give them a serial number, and there must be carrier level default username and passwords on it because Cox is who manages the thing.
I would personally never use a cable modem/ADSL all in one router device. I just don't want the ISP inside my private network.
You give them the mac address but I think it's just to attach it to your account. Ya the one I bought is just the modem, I have an ERX.
-
@Dashrender said:
@johnhooks said:
I don't use Comcast equipment. I bought my own modem for like $70 and use that. Theirs sucked and you had to pay extra or some nonsense for bridging.
I'm not sure about Comcast - but with Cox use theirs, use yours, doesn't matter, they have full control over the device. You give them a serial number, and there must be carrier level default username and passwords on it because Cox is who manages the thing.
I would personally never use a cable modem/ADSL all in one router device. I just don't want the ISP inside my private network.
So you'd recommend a separate router and modem at home too? Any recommendations other than the Unify stuff mentioned above (not sure how expensive/easy to get hold of they are in the UK?
-
@Dashrender That seems insane that every Modem/ Router provider would be creating a custom account that the ISP could use to access a personally owned device..
-
@DustinB3403 said:
@Dashrender That seems insane that every Modem/ Router provider would be creating a custom account that the ISP could use to access a personally owned device..
And (from the UK point of view) certainly a legal grey area at best...
-
@NattNatt said:
@Dashrender said:
@johnhooks said:
I don't use Comcast equipment. I bought my own modem for like $70 and use that. Theirs sucked and you had to pay extra or some nonsense for bridging.
I'm not sure about Comcast - but with Cox use theirs, use yours, doesn't matter, they have full control over the device. You give them a serial number, and there must be carrier level default username and passwords on it because Cox is who manages the thing.
I would personally never use a cable modem/ADSL all in one router device. I just don't want the ISP inside my private network.
So you'd recommend a separate router and modem at home too? Any recommendations other than the Unify stuff mentioned above (not sure how expensive/easy to get hold of they are in the UK?
As a techie - absolutely I recommend them to be separate. For normal consumers who don't care - nah, they don't care so why should I?
-
The cable company in FL had an ONT in the garage. So the fiber went directly in the garage and then you could plug your router into the ONT.
-
@Dashrender I wonder if the same account you're mentioning would still be effective with an OS like DD-WRT on these units....
Also what models have you seen that Cox has control over? What kind of access do they have, what are they able to do? If they have access to the modem, what would stop them from accessing the router behind the modem?
-
@Dashrender said:
@NattNatt said:
@Dashrender said:
@johnhooks said:
I don't use Comcast equipment. I bought my own modem for like $70 and use that. Theirs sucked and you had to pay extra or some nonsense for bridging.
I'm not sure about Comcast - but with Cox use theirs, use yours, doesn't matter, they have full control over the device. You give them a serial number, and there must be carrier level default username and passwords on it because Cox is who manages the thing.
I would personally never use a cable modem/ADSL all in one router device. I just don't want the ISP inside my private network.
So you'd recommend a separate router and modem at home too? Any recommendations other than the Unify stuff mentioned above (not sure how expensive/easy to get hold of they are in the UK?
As a techie - absolutely I recommend them to be separate. For normal consumers who don't care - nah, they don't care so why should I?
but would it work if I got a modem and simply put that direct behind the All-in-one thing the company sent?
I presume it would but not done much networking stuff on this level... -
@DustinB3403 said:
@Dashrender That seems insane that every Modem/ Router provider would be creating a custom account that the ISP could use to access a personally owned device..
Well, the device manufacturer could do one of three things - 1) create a completely random password for every device and allow ISPs access to the DB 2) create a password based on the serial number, give the algorithm to the ISPs and the ISPs can figure out the passwords themselves 3)use the same usernames and passwords on every single one of them.
Now to provide some level of security - the cable modem could rely on ethernet level access, and not IP level access. This would prevent anyone on the internet from messing with the devices as routers don't route ethernet level packets.
-
-
I think we need someone with experience to weigh in on how this works. From my knowledge they use a DHCP-esque system and do MAC reservations to set addresses. @PSX_Defector may have some inside knowledge though. Certainly TWC hasn't, at least to my knowledge, logged into the modem to set it up. They get the MAC address then plug it into the network.
