Storage Question
-
@BRRABill said:
As an afterthought, I thought about not getting the PERC controller and a straight LSI/Adaptec. But then wouldn't that cause the same problems, where the DELL server itself doesn't like the drive, hence flashing the amber? Or is the hotplug cage lights controlled by the adapter itself?
No, this would not carry through the issue. The issue that you have is that the drives you have now are hidden behind a proprietary controller that cannot talk to the drives. Because of this, the OS or hypervisor cannot talk to the RAID controller to find out the status of the drives.
Going to an LSI controller, as an example, that can get SMART errors off of the drives means that now the information is presented to the OS. The server itself is not proprietary and does not block the OS from talking to peripherals.
-
@BRRABill said:
Our mailserver is currently sitting at around 110GB. The data server at 130. That's including data and OS (Server 2003). (I'll be buying a second server in a few weeks once I get this all worked out. I didn't want to buy them both in case any issues came up. And did they!!
)So
server 1 = dc/data
server 2 = dc/mailThe three Kingston SSDs are 480GB capacity. So there would be more than enough space.
So what I am hearing is....
Dump the RAID 1 array completely. Move to an LSI controller. Install everything to the RAID 5 SSD array. Fast, easy, done.
Why a second server? Is that really warranted?
-
@BRRABill said:
I wanted to have 2 servers for DC redundancy.
Now the obligatory you never want redundancy, only reliability link.
-
@scottalanmiller said:
@BRRABill said:
Our mailserver is currently sitting at around 110GB. The data server at 130. That's including data and OS (Server 2003). (I'll be buying a second server in a few weeks once I get this all worked out. I didn't want to buy them both in case any issues came up. And did they!!
)So
server 1 = dc/data
server 2 = dc/mailThe three Kingston SSDs are 480GB capacity. So there would be more than enough space.
So what I am hearing is....
Dump the RAID 1 array completely. Move to an LSI controller. Install everything to the RAID 5 SSD array. Fast, easy, done.
Why a second server? Is that really warranted?
I agree completely. You already have 3 SSD drives, so in RAID 5 you have 960 GB of storage, and you're using 230 GB, plenty of room for growth.
I'd stick with one box.
-
You need to do a cost analysis to see if the cost of downtime from the server going down is significant enough to justify the cost of getting another server. That's a lot of money in hardware AND money in licenses, potentially.
In Windows licensing alone going down to two VMs on a single host like nearly $700 in savings.
-
@DustinB3403 said:
Virtualize every server you have, and run everything between the two host.
Virtualize Everything!
Exchange is best not virtualized.
-
@scottalanmiller said:
Why a second server? Is that really warranted?
For DC redundancy. I really don't want to roll with one DC. I guess I could just install another copy of Server on a desktop for that purpose, though. I already purchased two licenses for it.
I was also thinking that since they will all be virtualized, it would be good to have a second server-grade box to be able to install to if the other server goes down.
-
@Jason said:
Exchange is best not virtualized.
Why? What artifact of Exchange would make it be that way? This goes against both industry knowledge and how Microsoft runs their own Exchange servers.
-
@BRRABill said:
For DC redundancy. I really don't want to roll with one DC.
What makes you so dependent on Active Directory? I've had AD go down for two weeks and not one user even mentioned it. That's atypical, but my point is that on its own AD is designed to be able to go offline for long periods of time with little or no impact. What's the specific risk that you are facing?
-
@BRRABill said:
I was also thinking that since they will all be virtualized, it would be good to have a second server-grade box to be able to install to if the other server goes down.
Being virtualized makes them more reliable, not less, so while having the ability to failover is good when it makes financial sense and virtualization makes this easier, it also slightly reduces the need for it.
-
@scottalanmiller said:
@Jason said:
Exchange is best not virtualized.
Why? What artifact of Exchange would make it be that way? This goes against both industry knowledge and how Microsoft runs their own Exchange servers.
I should say not virtualized in the sense that it runs on shared storage and does automated Vmotion. Exchange level failovers are much better.
-
And I thought my head was spinning 2 hours ago!
-
@scottalanmiller said:
@BRRABill said:
For DC redundancy. I really don't want to roll with one DC.
What makes you so dependent on Active Directory? I've had AD go down for two weeks and not one user even mentioned it. That's atypical, but my point is that on its own AD is designed to be able to go offline for long periods of time with little or no impact. What's the specific risk that you are facing?
Well I don't know about him, not that this is an advocate for requiring dual AD boxes, but I know that I run all internet DNS queries through my AD DNS box. If I only have one, then basically the internet is down for me as well as the AD box.
-
@scottalanmiller said:
What makes you so dependent on Active Directory? I've had AD go down for two weeks and not one user even mentioned it. That's atypical, but my point is that on its own AD is designed to be able to go offline for long periods of time with little or no impact. What's the specific risk that you are facing?
I was going on the concept you should always have 2 DCs.
-
@Jason said:
@scottalanmiller said:
@Jason said:
Exchange is best not virtualized.
Why? What artifact of Exchange would make it be that way? This goes against both industry knowledge and how Microsoft runs their own Exchange servers.
I should say not virtualized in the sense that it runs on shared storage and does automated Vmotion.
Oh, well yeah, of course it should not do that - you should be using application level reliability, not hardware based. If it's really needed.
-
@Dashrender said:
@scottalanmiller said:
@BRRABill said:
For DC redundancy. I really don't want to roll with one DC.
What makes you so dependent on Active Directory? I've had AD go down for two weeks and not one user even mentioned it. That's atypical, but my point is that on its own AD is designed to be able to go offline for long periods of time with little or no impact. What's the specific risk that you are facing?
Well I don't know about him, not that this is an advocate for requiring dual AD boxes, but I know that I run all internet DNS queries through my AD DNS box. If I only have one, then basically the internet is down for me as well as the AD box.
Should not be. You just set your secondary and tertiary DNS entries via DHCP to Google and voila, problem fixed.
-
@Jason said:
Exchange is best not virtualized.
Actually a third party mail server (MDaemon), not Exchange.
-
@scottalanmiller said:
Should not be. You just set your secondary and tertiary DNS entries via DHCP to Google and voila, problem fixed.
Um, that's against Best practice and causes AD DNS issues. @Rob-Dunn would fuss at you for that one.
-
@Jason said:
I should say not virtualized in the sense that it runs on shared storage and does automated Vmotion. Exchange level failovers are much better.
Ah yes, in that case, I totally agree. Virtualize but don't use shared storage of any sort. Application level high availability via the DAG groups is how it "should" be handled. And how Office 365 and any large environment that I know of would be handling it.
-
@scottalanmiller said:
@Dashrender said:
@scottalanmiller said:
@BRRABill said:
For DC redundancy. I really don't want to roll with one DC.
What makes you so dependent on Active Directory? I've had AD go down for two weeks and not one user even mentioned it. That's atypical, but my point is that on its own AD is designed to be able to go offline for long periods of time with little or no impact. What's the specific risk that you are facing?
Well I don't know about him, not that this is an advocate for requiring dual AD boxes, but I know that I run all internet DNS queries through my AD DNS box. If I only have one, then basically the internet is down for me as well as the AD box.
Should not be. You just set your secondary and tertiary DNS entries via DHCP to Google and voila, problem fixed.
Yeah, that's been less than successful for me in that past. Once the PC fails to the second or third DNS (which by itself even in Windows 7 seems to take forever) the machine will never failback. You have to reboot, or at least refresh IP to get it to go back.
But it's definitely an option, and one I would use in this case.
