Hi All,

Thanks for the support.

restarted the asterisk service of remote PBX which solved the issue.

Execute the command "core restart now" from PBX > Tools > Asterisk-Cli

@thecreativeone91 Yes, all other traffic working fine across the VPN

Hi All,

We have configured iax2 trunk between sites under VPN. It was working fine and now we are facing issue for one site .The aix2 peer shows unreachable but able to ping to the destination. All other sites are OK .

Some times we are having this issue and it was related to the ISP latency to that site, But this time the latency is fine but UNREACHABLE .Firewall rules are allow all to that PBX Server . We checked the latency and its around 265 ms

PING x.x.x.x (x.x.x.x) 56(84) bytes of data.
64 bytes from x.x.x.x: icmp_seq=1 ttl=62 time=264 ms
64 bytes from x.x.x.x: icmp_seq=2 ttl=62 time=266 ms
64 bytes from x.x.x.x: icmp_seq=3 ttl=62 time=264 ms
64 bytes from x.x.x.x: icmp_seq=4 ttl=62 time=265 ms

pbx1*CLI> iax2 show peers
Name/Username Host Mask Port Status Description
priv 0.0.0.0 (S) 0.0.0.0 4569 Unmonitored
Site1Direct/unkoc xxx.xxx.xxx.xxx (S) 255.255.255.255 4569 UNREACHABLE
Site2directlink2/ xxx.xxx.xxx.xxx (S) 255.255.255.255 4569 OK (216 ms)

We restarted the PBX several times, still the issue is not resolved.

Please help

Hi All

"amportal a ma installall" command Fixed the Issue.

While browsing the Elastix > PBX > PBX Configuration

The web page display the following error message:

(internal) No active FreePBX modules found. Please enable Unembedded FreePBX for troubleshooting.

The last command run is

964 apt-get install asterisk zaptel zaptel-source
965 yum install asterisk zaptel zaptel-source
966 amportal a ma update motif
967 amportal a ma update ivr
968 amportal a ma deleteall
969 amportal a ma installall

Any Idea how to bring back the PBX module?

@thecreativeone91 said:

eryone making changes. That's why when you do it it's nightly.

We required only weekly backup,

HI all,

I need to take automated backup for our Firewall and Swictches. Currently we are taking manual backup and its takes a lot of time. Our requirement to take automatic backups of all our network devices.

We have Cisco ASA 5510 , Fortigate 110 C/40C, Dell Switch 5524 , Dell switch N2048 , Dell 2824 , Cisco Catalysit ,Juniper SRX 240.

Cost effetive tools is preffered .

We are testing spice work and RANCID , but looking for a solution dedicated to automate network device backup.

Please suggest a suitable solution .

@Ambarishrh This is nice app, testing the same

Thanks all,

Will test all these and update

@Minion-Queen Aasna is good ,but am looking for a inhouse hosted web application

Hi All,

I Am looking for a opensource local hosted web based application for Team task management and task update for team members .

My requirement is to assign task to team members and the members can update their daily task. Also I need to take the report of the daily task per person by weekly .

Please suggest a good one.

Evaluating Feng Office Community Edition.

Thanks all , now am cleared

I was referring this link

https://www.qnap.com/i/in/trade_teach/con_show.php?op=showone&cid=9

Thanks for correcting me ..

How can i provide full permission to to that folder to the user . Full permission is configured with Windows ACL . Also am confused that the read/write tick is enabled and preview showing Read Only . i have verified all other folders,non having this issue

@scottalanmiller said:

u are showing below on the QNAP is the SMB Share Permissions. These two are unrelated. T

If i delete the user from windows ACL , then the user will be moved from the QNAP Share permission, how its happen if they are unrelated , its a doubt

Hi All,

I am having a folder permission issue with our QNAP TS-459U Turbo NAS , we have enabled windows ACL in QNAP ,so that the permission for the folders are applied through windows explorer.

Folder structure are
-- Root Folder
------First Sub Folder
---------Second Sub Folder

I have configured full permission to a user for the second sub folder and read only access for Root Folder and First Sub Folder . Please find the image of folder permssion in windows explorer.

The issue is that the user complaint that he doesn't have a write access to the folder. while checking the permission through QNAP web UI ,it is showing read+write access and preview shows Read Only.

Any one face this issue, is this a QNAP bug or we need to do any other configuration.

Please advice.

Thanks in advance.

Thanks all for the comments and suggestion.

. I will do a test based on the suggestions and will update.

@scottalanmiller said:

t hardware device have you been testing out?

Polycom HDX 7000 hardware device as hardware
Polycom real presence desktop as software to have VC for remote desktop user.

From the above point for video conference ,cloud based will be suite as it doesn't required to purchase any dedicated hardware and can be used in any device. But am concern with the room conference camera ,as hardware will have a high resolution camera which cover the whole team in a conference room, but how we can integrate that to the software or cloud based solution

@scottalanmiller I have tried polycom real presence desktop software to connect to the Hardware device and from that we can share the desktop meanwhile having conference .