Starting to work on an initial FreePBX setup script

JaredBusch

I've never installed FreePBX, from scratch, often enough, back to back, to actually script my process.

But today I decided to get off my ass and do a little more documentation. That turned in to me FFSing myself with "just fucking put it in a script Jared".

I put a new folder in my FreePBX helper scripts repo.
https://github.com/sorvani/freepbx-helper-scripts/tree/master/InitialSetup

I will turn the module deletion into a loop once I validate all the dependencies. I believe that the current order is correct though.

JaredBusch

Wondering how to better automate this first bit....

 - Install FreePBX 15 from the 2020-02 ISO
 - Log in as root to the Vultr virtual console
useradd --create-home jbusch
mkdir /home/jbusch/.ssh
wget -O /home/jbusch/.ssh/authorized_keys https://gitlab.com/sorvani/public_keys/-/raw/master/authorized_keys
chown -R jbusch:jbusch /home/jbusch/.ssh
chmod 700 /home/jbusch/.ssh
chmod 600 /home/jbusch/authorized_keys
passwd jbusch
gpasswd -a jbusch wheel
gpasswd -a jbusch asterisk
exit

 - from local terminal
ssh pbx15.bundystl.com (or IP)
sudo nano /etc/sshd/sshd_config
  - disable root login and password login.
wget https://raw.githubusercontent.com/sorvani/freepbx-helper-scripts/master/InitialSetup/setup.sh
chmod +x setup.sh
./setup.sh
  - wait for a while
 - Go to GUI and complete setup
 - Create admin account, activate system, and run the firewall wizard, then set interface to internet.

JaredBusch

FYI, as of April 13, 2020, this is wehre the above leaves a FreepBX 15 system.

[jbusch@freepbx ~]$ sudo fwconsole ma listonline
No repos specified, using: [standard,commercial] from last GUI settings

Module	Version	Status	License
accountcodepreserve	13.0.2.2	Enabled and up to date	GPLv2
amd	15.0.2	Enabled and up to date	GPLv3+
announcement	15.0.3.10	Enabled and up to date	GPLv3+
api		Not Installed (Available online: 15.0.3.7)	AGPLv3+
areminder		Not Installed (Available online: 15.0.14.20)	Commercial
arimanager	15.0.3.8	Enabled and up to date	GPLv3+
asterisk-cli	14.0.1	Enabled and up to date	GPLv3+
asteriskinfo	15.0.9	Enabled and up to date	GPLv3+
backup	15.0.8.94	Enabled and up to date	GPLv3+
blacklist	15.0.2.10	Enabled and up to date	GPLv3+
broadcast		Not Installed (Available online: 15.0.12)	Commercial
builtin		Enabled; Not available online
bulkhandler	13.0.17	Enabled and up to date	GPLv3+
calendar	15.0.4.19	Enabled and up to date	GPLv3+
callback	15.0.8	Enabled and up to date	GPLv3+
callerid		Not Installed (Available online: 15.0.14)	Commercial
callforward	15.0.10	Enabled and up to date	AGPLv3+
calllimit		Not Installed (Available online: 15.0.5.3)	Commercial
callrecording	15.0.7.11	Enabled and up to date	AGPLv3+
callwaiting	15.0.4.2	Enabled and up to date	GPLv3+
campon	13.0.4.1	Enabled and up to date	GPLv3+
cdr	15.0.17	Enabled and up to date	GPLv3+
cel	15.0.15.8	Enabled and up to date	GPLv3+
certman	15.0.22	Enabled and up to date	AGPLv3+
cidlookup	15.0.15	Enabled and up to date	GPLv3+
conferences	15.0.7.4	Enabled and up to date	GPLv3+
conferencespro		Not Installed (Available online: 15.0.3.15)	Commercial
configedit	13.0.7.1	Enabled and up to date	AGPLv3+
contactmanager	15.0.8.23	Enabled and up to date	GPLv3+
core	15.0.9.94	Enabled and up to date	GPLv3+
cos		Not Installed (Available online: 15.0.9)	Commercial
customappsreg	15.0.13	Enabled and up to date	GPLv3+
cxpanel		Not Installed (Available online: 15.0.4)	GPLv3
dahdiconfig	15.0.5.4	Enabled and up to date	GPLv3+
dashboard	15.0.5	Enabled and up to date	AGPLv3+
daynight	15.0.11	Enabled and up to date	GPLv3+
dictate	15.0.6	Enabled and up to date	GPLv3+
digium_phones	15.0.2	Enabled and up to date	GPLv2
digiumaddoninstaller	13.0.1.1	Enabled and up to date	GPLv2
directory	15.0.16	Enabled and up to date	GPLv3+
disa	15.0.4.7	Enabled and up to date	AGPLv3+
donotdisturb	15.0.6	Enabled and up to date	GPLv3+
endpoint		Not Installed (Available online: 15.0.27.16)	Commercial
extensionroutes		Not Installed (Available online: 15.0.5)	Commercial
extensionsettings	13.0.4	Enabled and up to date	GPLv3+
fax	15.0.19	Enabled and up to date	GPLv3+
faxpro		Not Installed (Available online: 15.0.8.8)	Commercial
featurecodeadmin	13.0.6.4	Enabled and up to date	GPLv3+
filestore	15.0.3.7	Enabled and up to date	AGPLv3
findmefollow	15.0.20	Enabled and up to date	GPLv3+
firewall	15.0.6.5	Enabled and up to date	AGPLv3+
framework	15.0.16.49	Enabled and up to date	GPLv2+
fw_langpacks	14.0.1	Enabled and up to date	GPLv3+
hotelwakeup	15.0.5.4	Enabled and up to date	GPLv2
iaxsettings	15.0.6	Enabled and up to date	AGPLv3
infoservices	15.0.2	Enabled and up to date	GPLv2+
iotserver		Not Installed (Available online: 15.0.0.7)	Commercial
irc	13.0.1	Enabled and up to date	GPLv3+
ivr	15.0.26	Enabled and up to date	GPLv3+
languages	15.0.10	Enabled and up to date	GPLv3+
logfiles	13.0.10.7	Enabled and up to date	GPLv3+
manager	15.0.9	Enabled and up to date	GPLv2+
miscapps	15.0.8	Enabled and up to date	GPLv3+
miscdests	15.0.2.9	Enabled and up to date	GPLv3+
music	15.0.20	Enabled and up to date	GPLv3+
oracle_connector		Not Installed (Available online: 14.0.1.8)	Commercial
outroutemsg	15.0.9	Enabled and up to date	GPLv3+
paging	15.0.4.21	Enabled and up to date	GPLv3+
pagingpro		Not Installed (Available online: 15.0.1.16)	Commercial
parking	15.0.15	Enabled and up to date	GPLv3+
parkpro		Not Installed (Available online: 15.0.12.6)	Commercial
pbdirectory	2.11.0.6	Enabled and up to date	GPLv3+
phonebook	15.0.11	Enabled and up to date	GPLv3+
phpinfo	13.0.2	Enabled and up to date	GPLv2+
pinsets	15.0.1.10	Enabled and up to date	GPLv3+
pinsetspro		Not Installed (Available online: 15.0.3)	Commercial
pm2	15.0.3.7	Enabled and up to date	AGPLv3+
pms		Not Installed (Available online: 15.0.2.45)	Commercial
presencestate	15.0.9	Enabled and up to date	GPLv3+
printextensions	13.0.3.2	Enabled and up to date	GPLv3+
queueprio	15.0.10	Enabled and up to date	GPLv3+
queues	15.0.17	Enabled and up to date	GPLv2+
queuestats		Not Installed (Available online: 15.0.3.25)	Commercial
qxact_reports		Not Installed (Available online: 15.0.3.20)	Commercial
recording_report		Not Installed (Available online: 15.0.4.24)	Commercial
recordings	15.0.3.13	Enabled and up to date	GPLv3+
restapps		Not Installed (Available online: 15.0.19.3)	Commercial
ringgroups	15.0.11.7	Enabled and up to date	GPLv3+
sangomacrm		Not Installed (Available online: 15.0.14.43)	Commercial
setcid	15.0.8	Enabled and up to date	GPLv3+
sipsettings	15.0.6.25	Enabled and up to date	AGPLv3+
sipstation		Not Installed (Available online: 15.0.5.8)	Commercial
sms		Not Installed (Available online: 15.0.4)	Commercial
soundlang	15.0.5.6	Enabled and up to date	GPLv3+
speeddial	2.11.0.4	Enabled and up to date	GPLv3+
superfecta	15.0.2.23	Enabled and up to date	GPLv2+
sysadmin	15.0.13.18	Enabled and up to date	Commercial
timeconditions	15.0.15.2	Enabled and up to date	GPLv3+
tts	15.0.9	Enabled and up to date	GPLv3+
ttsengines	15.0.4.6	Enabled and up to date	AGPLv3
ucp	15.0.6.14	Enabled and up to date	AGPLv3+
userman	15.0.23	Enabled and up to date	AGPLv3+
vega		Not Installed (Available online: 15.0.6)	Commercial+
vmblast	15.0.11.3	Enabled and up to date	GPLv3+
vmnotify		Not Installed (Available online: 15.0.10)	Commercial
voicemail	15.0.18.13	Enabled and up to date	GPLv3+
voicemail_report		Not Installed (Available online: 15.0.5)	Commercial
vqplus		Not Installed (Available online: 15.0.7.15)	Commercial
weakpasswords	13.0.2	Enabled and up to date	GPLv3+
webcallback		Not Installed (Available online: 15.0.6.2)	Commercial
webrtc	15.0.8	Enabled and up to date	GPLv3+
xmpp	15.0.6.4	Enabled and up to date	AGPLv3
zulu		Not Installed (Available online: 15.0.58.3)	Commercial

black3dynamite

# Prompt for a username and password
read -p "Enter a new username: " myUserName
read -s -p "Enter a new password for $myUserName: " myPassword; echo

# Prompt for your GitLab username
read -p "Enter your GitLab username: " myGitLabUsername

# Create user account and add user to wheel and asterisk group
useradd --create-home $myUserName --password $myPassword
gpasswd -a $myUserName wheel
gpasswd -a $myUserName asterisk

# Create .ssh directory, add authorized_keys file, set permissions
mkdir /home/$myUserName/.ssh
wget -O /home/$myUserName/.ssh/authorized_keys https://gitlab.com/$myGitLabUsername/public_keys/-/raw/master/authorized_keys
chown -R $myUserName:$myUserName /home/$myUserName/.ssh
chmod 700 /home/$myUserName/.ssh
chmod 600 /home/$myUserName/.ssh/authorized_keys

# Disable root login
sed -i 's/#\?\(PerminRootLogin\s*\).*$/\1 no/' /etc/ssh/sshd_config
# Disable PasswordAuthentication
# Ends up with duplicate PasswordAuthentication because it modifies both #PasswordAuthentication and PasswordAuthentication
sed -i 's/#\?\(PasswordAuthentication\s*\).*$/\1 no/' /etc/ssh/sshd_config

wget https://raw.githubusercontent.com/sorvani/freepbx-helper-scripts/master/InitialSetup/setup.sh
chmod +x setup.sh
./setup.sh

systemctl restart sshd.service
exit

JaredBusch

@black3dynamite dunno if that is "better" from an automation standpoint, but it is certainly better from a guide standpoint.

JaredBusch

so restoring again.

lots of typing from the initial root login in the Vultr virtual console. I need to make that less.
hmmm....

JaredBusch

New method, testing now.

Complete setup from ISO in Vultr Virtual Console.
Log in as root user in the Vultr Virtual Console.
Download this script and execute.

wget https://raw.githubusercontent.com/sorvani/freepbx-helper-scripts/master/InitialSetup/root_setup.sh
chmod +x root_setup.sh
./root_setup.sh

Log in as your user via SSH
Execute the setup.sh already in your home folder.

sudo ./setup.sh

JaredBusch

Assuming this works as planned, then making it more generic would be next up.
For example, for getting the SSH public keys or not.

JaredBusch

That worked well.

black3dynamite

@JaredBusch said in Starting to work on an initial FeePBX setup script:

@black3dynamite dunno if that is "better" from an automation standpoint, but it is certainly better from a guide standpoint.

Yeah, I was all over the place trying to make it more of an automation deployment.

One of the things going back and forth was the part for creating a password, I was thinking of using chage -d 0 $myUserName to force password change upon first login instead of having the user enter a password during the setup since the PasswordAuthentication is disabled. And then use arguments instead of read prompts.

JaredBusch

@black3dynamite said in Starting to work on an initial FeePBX setup script:

@JaredBusch said in Starting to work on an initial FeePBX setup script:

@black3dynamite dunno if that is "better" from an automation standpoint, but it is certainly better from a guide standpoint.

Yeah, I was all over the place trying to make it more of an automation deployment.

One of the things going back and forth was the part for creating a password, I was thinking of using chage -d 0 $myUserName to force password change upon first login instead of having the user enter a password during the setup since the PasswordAuthentication is disabled. And then use arguments instead of read prompts.

I was thinking something like that also with the new user. But I had not had time to look up the syntax.

scottalanmiller

Corrected the title to FreePBX instead of FeePBX, lol. Although that name would be useful somewhere, too.

JaredBusch

@scottalanmiller said in Starting to work on an initial FreePBX setup script:

Corrected the title to FreePBX instead of FeePBX, lol. Although that name would be useful somewhere, too.

go me