Network routing question
-
@Kelly said in Network routing question:
@FATeknollogee said in Network routing question:
@Kelly said in Network routing question:
@FATeknollogee said in Network routing question:
@Kelly said in Network routing question:
@FATeknollogee said in Network routing question:
Does 250.254 have 235.235 in its upstream list or have a secondary zone for 235.x?
No, 250.254 doesn't have a DNS server, just services provided by the dhcp router.
I am confused. Either way, does the DNS server in the subnet where your DNS service is working have the DNS server for the non functioning subnet in its upstream list or a secondary zone for that subnet?
250.254 is my Meraki router (so no "standalone" DNS server)
Not sure if I can add a secondary zoneYou can use an IP helper for a Meraki: https://documentation.meraki.com/MX/DHCP/Configuring_DHCP_Relay.
Unfortunately, no MX, I got rid of my MX84.
DHCP is handled by Meraki MS320-24 Layer 3 switch -
Why are you discussing DNS? Routing has nothing to do with DNS. DNS is for resolving names.
-
@Pete-S said in Network routing question:
Why are you discussing DNS? Routing has nothing to do with DNS. DNS is for resolving names.
Because I want to access the resources via name resolution (you gotta read my OP)
-
Looks like the MS series supports the DHCP relay setting: https://community.meraki.com/t5/Switching/need-to-configure-DHCP-IP-helper-address-on-VLAN-in-MS-switch/td-p/22806.
-
@Kelly said in Network routing question:
Looks like the MS series supports the DHCP relay setting: https://community.meraki.com/t5/Switching/need-to-configure-DHCP-IP-helper-address-on-VLAN-in-MS-switch/td-p/22806.
I can't use that relay setting since I still need dhcp on the 250.254 network
-
@FATeknollogee said in Network routing question:
@Kelly said in Network routing question:
Looks like the MS series supports the DHCP relay setting: https://community.meraki.com/t5/Switching/need-to-configure-DHCP-IP-helper-address-on-VLAN-in-MS-switch/td-p/22806.
I can't use that relay setting since I still need dhcp on the 250.254 network
If you're using some automation you could push the resolution for specific targets to the hosts file on the end points.
-
@dafyre said in Network routing question:
@dafyre said in Network routing question:
DNS server is at 10.50.235.235
Configure your computer to look to 235.235 for DNS... and configure the DNS server at 235.235 to forward anything it doesn't recognize along to your Meraki?
I added 235.235 as an additional DNS in the 250.254 network.
I tried this yesterday but silly me forgot to "refresh" the NIC so it could grab the new settings.
All is good & working.
