DNS Update Issue
-
@JaredBusch said in DNS Update Issue:
@Dashrender said in DNS Update Issue:
@JaredBusch said in DNS Update Issue:
@Dashrender said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Dashrender A computer is making a request of DC1. DC1's dns service has failed. computer receives no response and moves to DC2 (the second dns entry). This is what I am referring to. Why would DC1 need to reference DC2 in it's own DNS entries? The replication is something else entirely and doesnt rely on the dns service. Am I missing something? If the DNS service fails it's just a failure regardless of other entries.
Correct - that's how the client works.
But the server is also a client. Active Directory needs to make a DNS call - so it looks to the IP stack and gets the primary DNS server IP - which fails to respond. If there is no secondary DNS server, the AD service on this server now fails. BUT if you have a secondary DNS entry in the IP settings, then the IP stack will flip over to using the secondary DNS listed... and now get a response for Active Directory.
If 127.0.0.1 fails to respond to a DNS request, you have issues that need resolved. Dont mask it.
then there is never a reason to give a client a secondary DNS either - don't mask that problem.
Incorrect, because a client system is not a DNS server. You don’t setup a client and a server the same.
Why not? From the client perspective (the client process that is) it's the same. Point primarily to one DNS server, then secondarily to a different one. Why would one client be different from another just because it has access to a local server?
-
@scottalanmiller said in DNS Update Issue:
@Dashrender said in DNS Update Issue:
@JaredBusch said in DNS Update Issue:
@Dashrender said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Dashrender A computer is making a request of DC1. DC1's dns service has failed. computer receives no response and moves to DC2 (the second dns entry). This is what I am referring to. Why would DC1 need to reference DC2 in it's own DNS entries? The replication is something else entirely and doesnt rely on the dns service. Am I missing something? If the DNS service fails it's just a failure regardless of other entries.
Correct - that's how the client works.
But the server is also a client. Active Directory needs to make a DNS call - so it looks to the IP stack and gets the primary DNS server IP - which fails to respond. If there is no secondary DNS server, the AD service on this server now fails. BUT if you have a secondary DNS entry in the IP settings, then the IP stack will flip over to using the secondary DNS listed... and now get a response for Active Directory.
If 127.0.0.1 fails to respond to a DNS request, you have issues that need resolved. Dont mask it.
then there is never a reason to give a client a secondary DNS either - don't mask that problem.
Or to have a second AD / DNS at all, since all of that is to mask failures from the end users.
Masking problems isn't the goal but it's a side effect of doing it this way
-
@Donahue said in DNS Update Issue:
@pmoncho said in DNS Update Issue:
@Donahue said in DNS Update Issue:
man, after reading all this, I am pretty sure my DNS is not correct.
I think I am with ya on this one.
So let me get this straight. On DC0 with AD Integrated DNS, Preferred DNS should be IP address of DC0 and Alternate DNS should be 127.0.0.1?
Currently I point DC0 Preferred to itself and Alternate to DC1. I have not had any issue over the last X amount of years so I don't know what the actual issue is with my current setup.
I currently have a .local also (setup by a contractor a long time ago).
mine is the same. First is it's own IP, secondary is the other DC
That's what I do. Some people flip that, but you get lower latency with the major one being the local one.
-
@Donahue said in DNS Update Issue:
Ok, I am definitely getting confused between the DNS client settings that are set at the NIC, and some other internal setting in the DNS manager.
@JaredBusch Where are you saying we should set the loopback? What should the NIC settings be?
NIC to loopback, not the forwarders, forwarders can't look to the loopback, that would break a lot of things.
-
@scottalanmiller said in DNS Update Issue:
@Donahue said in DNS Update Issue:
Ok, I am definitely getting confused between the DNS client settings that are set at the NIC, and some other internal setting in the DNS manager.
@JaredBusch Where are you saying we should set the loopback? What should the NIC settings be?
NIC to loopback, not the forwarders, forwarders can't look to the loopback, that would break a lot of things.
I have no idea what you are saying. This is my NIC settings currently on my local DC. The first one is it's own IP, but not loopback.
-
@Donahue The first one (It's own IP) should be 127.0.0.1 is what they are saying
-
@wirestyle22 said in DNS Update Issue:
@Donahue The first one (It's own IP) should be 127.0.0.1 is what they are saying
That's what I thought. What about settings for the DNS server service?
-
@wirestyle22 said in DNS Update Issue:
@scottalanmiller said in DNS Update Issue:
@Dashrender said in DNS Update Issue:
@JaredBusch said in DNS Update Issue:
@Dashrender said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Dashrender A computer is making a request of DC1. DC1's dns service has failed. computer receives no response and moves to DC2 (the second dns entry). This is what I am referring to. Why would DC1 need to reference DC2 in it's own DNS entries? The replication is something else entirely and doesnt rely on the dns service. Am I missing something? If the DNS service fails it's just a failure regardless of other entries.
Correct - that's how the client works.
But the server is also a client. Active Directory needs to make a DNS call - so it looks to the IP stack and gets the primary DNS server IP - which fails to respond. If there is no secondary DNS server, the AD service on this server now fails. BUT if you have a secondary DNS entry in the IP settings, then the IP stack will flip over to using the secondary DNS listed... and now get a response for Active Directory.
If 127.0.0.1 fails to respond to a DNS request, you have issues that need resolved. Dont mask it.
then there is never a reason to give a client a secondary DNS either - don't mask that problem.
Or to have a second AD / DNS at all, since all of that is to mask failures from the end users.
Masking problems isn't the goal but it's a side effect of doing it this way
No more so than having RAID masks the problem. So it's better to have end user impact on DNS than it is from a drive failure?
-
@Donahue said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Donahue The first one (It's own IP) should be 127.0.0.1 is what they are saying
That's what I thought. What about settings for the DNS server service?
The DNS server (via DNS Manager) should have it's forwarders set to whatever service you want to use as your upstream resolution provider (I use Google - some people pay Umbrella, so they use Umbrella).
-
@Dashrender said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@scottalanmiller said in DNS Update Issue:
@Dashrender said in DNS Update Issue:
@JaredBusch said in DNS Update Issue:
@Dashrender said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Dashrender A computer is making a request of DC1. DC1's dns service has failed. computer receives no response and moves to DC2 (the second dns entry). This is what I am referring to. Why would DC1 need to reference DC2 in it's own DNS entries? The replication is something else entirely and doesnt rely on the dns service. Am I missing something? If the DNS service fails it's just a failure regardless of other entries.
Correct - that's how the client works.
But the server is also a client. Active Directory needs to make a DNS call - so it looks to the IP stack and gets the primary DNS server IP - which fails to respond. If there is no secondary DNS server, the AD service on this server now fails. BUT if you have a secondary DNS entry in the IP settings, then the IP stack will flip over to using the secondary DNS listed... and now get a response for Active Directory.
If 127.0.0.1 fails to respond to a DNS request, you have issues that need resolved. Dont mask it.
then there is never a reason to give a client a secondary DNS either - don't mask that problem.
Or to have a second AD / DNS at all, since all of that is to mask failures from the end users.
Masking problems isn't the goal but it's a side effect of doing it this way
No more so than having RAID masks the problem. So it's better to have end user impact on DNS than it is from a drive failure?
Valid
-
@Donahue said in DNS Update Issue:
@scottalanmiller said in DNS Update Issue:
@Donahue said in DNS Update Issue:
Ok, I am definitely getting confused between the DNS client settings that are set at the NIC, and some other internal setting in the DNS manager.
@JaredBusch Where are you saying we should set the loopback? What should the NIC settings be?
NIC to loopback, not the forwarders, forwarders can't look to the loopback, that would break a lot of things.
I have no idea what you are saying. This is my NIC settings currently on my local DC. The first one is it's own IP, but not loopback.
First one should be loopback, loopback is faster and more reliable than the local IP, it bypasses part of the network stack.
The secondary should be a different DNS server, which it is. So that's correct.
-
@Donahue said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Donahue The first one (It's own IP) should be 127.0.0.1 is what they are saying
That's what I thought. What about settings for the DNS server service?
The server cannot point to itself. DNS servers have forwarders, it's a different concept.
-
@Dashrender said in DNS Update Issue:
@Donahue said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Donahue The first one (It's own IP) should be 127.0.0.1 is what they are saying
That's what I thought. What about settings for the DNS server service?
The DNS server (via DNS Manager) should have it's forwarders set to whatever service you want to use as your upstream resolution provider (I use Google - some people pay Umbrella, so they use Umbrella).
I use CloudFlare. Just throwing that out there.
-
@scottalanmiller said in DNS Update Issue:
@Donahue said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Donahue The first one (It's own IP) should be 127.0.0.1 is what they are saying
That's what I thought. What about settings for the DNS server service?
The server cannot point to itself. DNS servers have forwarders, it's a different concept.
It can, it's just a terrible idea. This was the case with my families business.
-
@Dashrender said in DNS Update Issue:
@Donahue said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Donahue The first one (It's own IP) should be 127.0.0.1 is what they are saying
That's what I thought. What about settings for the DNS server service?
The DNS server (via DNS Manager) should have it's forwarders set to whatever service you want to use as your upstream resolution provider (I use Google - some people pay Umbrella, so they use Umbrella).
ok, weird. One of my DC's, the one at my location, is set to only google. The other at my branch is set to the DC at my location, then our two ISP provided servers, and then finally to google.
-
@wirestyle22 said in DNS Update Issue:
@scottalanmiller said in DNS Update Issue:
@Donahue said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Donahue The first one (It's own IP) should be 127.0.0.1 is what they are saying
That's what I thought. What about settings for the DNS server service?
The server cannot point to itself. DNS servers have forwarders, it's a different concept.
It can, it's just a terrible idea. This was the case with my families business.
That'll definitely break all kinds of things.
-
@Donahue said in DNS Update Issue:
@Dashrender said in DNS Update Issue:
@Donahue said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Donahue The first one (It's own IP) should be 127.0.0.1 is what they are saying
That's what I thought. What about settings for the DNS server service?
The DNS server (via DNS Manager) should have it's forwarders set to whatever service you want to use as your upstream resolution provider (I use Google - some people pay Umbrella, so they use Umbrella).
ok, weird. One of my DC's, the one at my location, is set to only google. The other at my branch is set to the DC at my location, then our two ISP provided servers, and then finally to google.
He means it shouldn't be, not that it can't. It can be listed but it doesn't function correctly when it's set that way.
-
@scottalanmiller said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@scottalanmiller said in DNS Update Issue:
@Donahue said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Donahue The first one (It's own IP) should be 127.0.0.1 is what they are saying
That's what I thought. What about settings for the DNS server service?
The server cannot point to itself. DNS servers have forwarders, it's a different concept.
It can, it's just a terrible idea. This was the case with my families business.
That'll definitely break all kinds of things.
Yeah I immediately changed it. One of the DC's had no forwarders at all!
-
@wirestyle22 said in DNS Update Issue:
@scottalanmiller said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@scottalanmiller said in DNS Update Issue:
@Donahue said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Donahue The first one (It's own IP) should be 127.0.0.1 is what they are saying
That's what I thought. What about settings for the DNS server service?
The server cannot point to itself. DNS servers have forwarders, it's a different concept.
It can, it's just a terrible idea. This was the case with my families business.
That'll definitely break all kinds of things.
Yeah I immediately changed it. One of the DC's had no forwarders at all!
This is actually less of an issue. Windows DNS servers have root hints - so if there are no forwarders listed, the query will be sent to a root server.
-
@Donahue said in DNS Update Issue:
@Dashrender said in DNS Update Issue:
@Donahue said in DNS Update Issue:
@wirestyle22 said in DNS Update Issue:
@Donahue The first one (It's own IP) should be 127.0.0.1 is what they are saying
That's what I thought. What about settings for the DNS server service?
The DNS server (via DNS Manager) should have it's forwarders set to whatever service you want to use as your upstream resolution provider (I use Google - some people pay Umbrella, so they use Umbrella).
ok, weird. One of my DC's, the one at my location, is set to only google. The other at my branch is set to the DC at my location, then our two ISP provided servers, and then finally to google.
You DNS Forwarders are set to only google? ok - so what's the problem? There is nothing wrong with that.
