SAS SSD vs SAS HDD in a RAID 10?
-
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@jaredbusch said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@phlipelder said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
I'm planning the build on a new server. I originally intended on putting 8 x "900GB 15K RPM SAS 12Gbps 512e" drives into a RAID 10 config using an H740P adapter, but then I saw that there are quite a few options for SAS SSD. I haven't really learned too much about the differences of putting SSD in RAID and how it compares to HDD in RAID, so I wanted to see if anyone here (Scott) had any input on the matter.
Example: Would it be worth putting, say, 6 x "1.6TB SSD SAS Mix Use 12Gbps 512e" drives into a RAID 10 instead? Is there a better approach with SSD in RAID?
RAID 6 is the way to go. We lost a server after replacing a drive and it's RAID 10 pair decided to drop out about 5 to 10 minutes into a rebuild.
In our comparison testing 8x 10K SAS drives in RAID 6 has a mean throughput of 800MiB/Second and about 250-450 IOPS per disk depending on the storage stack configuration.
SAS SSD would be anywhere from 25K IOPS per disk to 55K-75K IOPS per disk depending on whether read intensive, mixed use, or write intensive. There are some good deals out there on HGST SSDs (our preferred SAS SSD vendor).
Yeah, I've decided on RAID 6 if I am able to go with SSD drives. I am building out the server on Dell and purchasing through our VAR when it comes time to order.
Serious question, now that you seem to understand the concepts of what you may actually need.
Why R6? Your current workload seems to be nowhere near that level of redundancy, and does not appear to need it. Use a pair of SSD in R1 or a triplet in R5.
Yeah, getting new hardware is a time to evaluate this. But why the big jump to R6?
Edit: Yes, I realize hat your early posts stated you wanted to minimize any potential downtime.
For our current setup, we have 5 drives total: 4 drives in a RAID5 plus 1 dedicated drive as a hot-spare. We have about 1.6 TB total storage, 100GB of which is for Windows Server. The rest of the storage space is for our SQL database and it is nearing 90% full. I am looking to add another 2 or so GB of storage on top of that after migration.
The reason I wanted to go with RAID 6 if in an SSD setup is simply because it offers more protection than RAID 5. I want to eliminate outages as much as humanly possible. I don't want to have to restore from backups as much as possible.
I guess I could put two 4TB SSD's in a RAID 1 but there's doesn't seem to be an SSD of that capacity as an option while customizing the R740 I am building.
You only want to add 2GB of capacity or 2TB of capacity?
-
oops delete me
-
@dustinb3403 said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@jaredbusch said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@phlipelder said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
I'm planning the build on a new server. I originally intended on putting 8 x "900GB 15K RPM SAS 12Gbps 512e" drives into a RAID 10 config using an H740P adapter, but then I saw that there are quite a few options for SAS SSD. I haven't really learned too much about the differences of putting SSD in RAID and how it compares to HDD in RAID, so I wanted to see if anyone here (Scott) had any input on the matter.
Example: Would it be worth putting, say, 6 x "1.6TB SSD SAS Mix Use 12Gbps 512e" drives into a RAID 10 instead? Is there a better approach with SSD in RAID?
RAID 6 is the way to go. We lost a server after replacing a drive and it's RAID 10 pair decided to drop out about 5 to 10 minutes into a rebuild.
In our comparison testing 8x 10K SAS drives in RAID 6 has a mean throughput of 800MiB/Second and about 250-450 IOPS per disk depending on the storage stack configuration.
SAS SSD would be anywhere from 25K IOPS per disk to 55K-75K IOPS per disk depending on whether read intensive, mixed use, or write intensive. There are some good deals out there on HGST SSDs (our preferred SAS SSD vendor).
Yeah, I've decided on RAID 6 if I am able to go with SSD drives. I am building out the server on Dell and purchasing through our VAR when it comes time to order.
Serious question, now that you seem to understand the concepts of what you may actually need.
Why R6? Your current workload seems to be nowhere near that level of redundancy, and does not appear to need it. Use a pair of SSD in R1 or a triplet in R5.
Yeah, getting new hardware is a time to evaluate this. But why the big jump to R6?
Edit: Yes, I realize hat your early posts stated you wanted to minimize any potential downtime.
For our current setup, we have 5 drives total: 4 drives in a RAID5 plus 1 dedicated drive as a hot-spare. We have about 1.6 TB total storage, 100GB of which is for Windows Server. The rest of the storage space is for our SQL database and it is nearing 90% full. I am looking to add another 2 or so GB of storage on top of that after migration.
The reason I wanted to go with RAID 6 if in an SSD setup is simply because it offers more protection than RAID 5. I want to eliminate outages as much as humanly possible. I don't want to have to restore from backups as much as possible.
I guess I could put two 4TB SSD's in a RAID 1 but there's doesn't seem to be an SSD of that capacity as an option while customizing the R740 I am building.
You only want to add 2GB of capacity or 2TB of capacity?
I am looking to add 2TB so the target is to have about 4TB of storage.
-
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@dustinb3403 said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@jaredbusch said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@phlipelder said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
I'm planning the build on a new server. I originally intended on putting 8 x "900GB 15K RPM SAS 12Gbps 512e" drives into a RAID 10 config using an H740P adapter, but then I saw that there are quite a few options for SAS SSD. I haven't really learned too much about the differences of putting SSD in RAID and how it compares to HDD in RAID, so I wanted to see if anyone here (Scott) had any input on the matter.
Example: Would it be worth putting, say, 6 x "1.6TB SSD SAS Mix Use 12Gbps 512e" drives into a RAID 10 instead? Is there a better approach with SSD in RAID?
RAID 6 is the way to go. We lost a server after replacing a drive and it's RAID 10 pair decided to drop out about 5 to 10 minutes into a rebuild.
In our comparison testing 8x 10K SAS drives in RAID 6 has a mean throughput of 800MiB/Second and about 250-450 IOPS per disk depending on the storage stack configuration.
SAS SSD would be anywhere from 25K IOPS per disk to 55K-75K IOPS per disk depending on whether read intensive, mixed use, or write intensive. There are some good deals out there on HGST SSDs (our preferred SAS SSD vendor).
Yeah, I've decided on RAID 6 if I am able to go with SSD drives. I am building out the server on Dell and purchasing through our VAR when it comes time to order.
Serious question, now that you seem to understand the concepts of what you may actually need.
Why R6? Your current workload seems to be nowhere near that level of redundancy, and does not appear to need it. Use a pair of SSD in R1 or a triplet in R5.
Yeah, getting new hardware is a time to evaluate this. But why the big jump to R6?
Edit: Yes, I realize hat your early posts stated you wanted to minimize any potential downtime.
For our current setup, we have 5 drives total: 4 drives in a RAID5 plus 1 dedicated drive as a hot-spare. We have about 1.6 TB total storage, 100GB of which is for Windows Server. The rest of the storage space is for our SQL database and it is nearing 90% full. I am looking to add another 2 or so GB of storage on top of that after migration.
The reason I wanted to go with RAID 6 if in an SSD setup is simply because it offers more protection than RAID 5. I want to eliminate outages as much as humanly possible. I don't want to have to restore from backups as much as possible.
I guess I could put two 4TB SSD's in a RAID 1 but there's doesn't seem to be an SSD of that capacity as an option while customizing the R740 I am building.
You only want to add 2GB of capacity or 2TB of capacity?
I am looking to add 2TB so the target is to have about 4TB of storage.
I would use RAID5. You will be single disk tolerant and rebuild faster than you would need to worry about, generally. I mean you also have backups right?
3x 2TB drives or 4x 1.5TB drives.
RAID6 with 2 disk tolerance means a minimum of 5 drives.
5x 1.5TB drives to get 4TB+
-
@jaredbusch said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@dustinb3403 said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@jaredbusch said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@phlipelder said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
I'm planning the build on a new server. I originally intended on putting 8 x "900GB 15K RPM SAS 12Gbps 512e" drives into a RAID 10 config using an H740P adapter, but then I saw that there are quite a few options for SAS SSD. I haven't really learned too much about the differences of putting SSD in RAID and how it compares to HDD in RAID, so I wanted to see if anyone here (Scott) had any input on the matter.
Example: Would it be worth putting, say, 6 x "1.6TB SSD SAS Mix Use 12Gbps 512e" drives into a RAID 10 instead? Is there a better approach with SSD in RAID?
RAID 6 is the way to go. We lost a server after replacing a drive and it's RAID 10 pair decided to drop out about 5 to 10 minutes into a rebuild.
In our comparison testing 8x 10K SAS drives in RAID 6 has a mean throughput of 800MiB/Second and about 250-450 IOPS per disk depending on the storage stack configuration.
SAS SSD would be anywhere from 25K IOPS per disk to 55K-75K IOPS per disk depending on whether read intensive, mixed use, or write intensive. There are some good deals out there on HGST SSDs (our preferred SAS SSD vendor).
Yeah, I've decided on RAID 6 if I am able to go with SSD drives. I am building out the server on Dell and purchasing through our VAR when it comes time to order.
Serious question, now that you seem to understand the concepts of what you may actually need.
Why R6? Your current workload seems to be nowhere near that level of redundancy, and does not appear to need it. Use a pair of SSD in R1 or a triplet in R5.
Yeah, getting new hardware is a time to evaluate this. But why the big jump to R6?
Edit: Yes, I realize hat your early posts stated you wanted to minimize any potential downtime.
For our current setup, we have 5 drives total: 4 drives in a RAID5 plus 1 dedicated drive as a hot-spare. We have about 1.6 TB total storage, 100GB of which is for Windows Server. The rest of the storage space is for our SQL database and it is nearing 90% full. I am looking to add another 2 or so GB of storage on top of that after migration.
The reason I wanted to go with RAID 6 if in an SSD setup is simply because it offers more protection than RAID 5. I want to eliminate outages as much as humanly possible. I don't want to have to restore from backups as much as possible.
I guess I could put two 4TB SSD's in a RAID 1 but there's doesn't seem to be an SSD of that capacity as an option while customizing the R740 I am building.
You only want to add 2GB of capacity or 2TB of capacity?
I am looking to add 2TB so the target is to have about 4TB of storage.
I would use RAID5. You will be single disk tolerant and rebuild faster than you would need to worry about, generally. I mean you also have backups right?
3x 2TB drives or 4x 1.5TB drives.
RAID6 with 2 disk tolerance means a minimum of 5 drives.
5x 1.5TB drives to get 4TB+
Yeah I suppose it was just that the extra protection of RAID 6 was appealing. We do have backups but it would take a long time to rebuild (done it before) and this server is one of our more business critical servers so if there's anything I can do to minimize risk and down-time, I would do it.
-
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@jaredbusch said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@dustinb3403 said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@jaredbusch said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@phlipelder said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
I'm planning the build on a new server. I originally intended on putting 8 x "900GB 15K RPM SAS 12Gbps 512e" drives into a RAID 10 config using an H740P adapter, but then I saw that there are quite a few options for SAS SSD. I haven't really learned too much about the differences of putting SSD in RAID and how it compares to HDD in RAID, so I wanted to see if anyone here (Scott) had any input on the matter.
Example: Would it be worth putting, say, 6 x "1.6TB SSD SAS Mix Use 12Gbps 512e" drives into a RAID 10 instead? Is there a better approach with SSD in RAID?
RAID 6 is the way to go. We lost a server after replacing a drive and it's RAID 10 pair decided to drop out about 5 to 10 minutes into a rebuild.
In our comparison testing 8x 10K SAS drives in RAID 6 has a mean throughput of 800MiB/Second and about 250-450 IOPS per disk depending on the storage stack configuration.
SAS SSD would be anywhere from 25K IOPS per disk to 55K-75K IOPS per disk depending on whether read intensive, mixed use, or write intensive. There are some good deals out there on HGST SSDs (our preferred SAS SSD vendor).
Yeah, I've decided on RAID 6 if I am able to go with SSD drives. I am building out the server on Dell and purchasing through our VAR when it comes time to order.
Serious question, now that you seem to understand the concepts of what you may actually need.
Why R6? Your current workload seems to be nowhere near that level of redundancy, and does not appear to need it. Use a pair of SSD in R1 or a triplet in R5.
Yeah, getting new hardware is a time to evaluate this. But why the big jump to R6?
Edit: Yes, I realize hat your early posts stated you wanted to minimize any potential downtime.
For our current setup, we have 5 drives total: 4 drives in a RAID5 plus 1 dedicated drive as a hot-spare. We have about 1.6 TB total storage, 100GB of which is for Windows Server. The rest of the storage space is for our SQL database and it is nearing 90% full. I am looking to add another 2 or so GB of storage on top of that after migration.
The reason I wanted to go with RAID 6 if in an SSD setup is simply because it offers more protection than RAID 5. I want to eliminate outages as much as humanly possible. I don't want to have to restore from backups as much as possible.
I guess I could put two 4TB SSD's in a RAID 1 but there's doesn't seem to be an SSD of that capacity as an option while customizing the R740 I am building.
You only want to add 2GB of capacity or 2TB of capacity?
I am looking to add 2TB so the target is to have about 4TB of storage.
I would use RAID5. You will be single disk tolerant and rebuild faster than you would need to worry about, generally. I mean you also have backups right?
3x 2TB drives or 4x 1.5TB drives.
RAID6 with 2 disk tolerance means a minimum of 5 drives.
5x 1.5TB drives to get 4TB+
Yeah I suppose it was just that the extra protection of RAID 6 was appealing. We do have backups but it would take a long time to rebuild (done it before) and this server is one of our more business critical servers so if there's anything I can do to minimize risk and down-time, I would do it.
The cost for a 5th 1.5TB drive is not a big deal. so that is a risk analysis for you to make. But compare it to a 3x 2TB drive array, not a 4x 1.5TB array.
-
Remember that every drive you add also increases the risk that one of the disks fails.
Let's assume the annual failure rate for HDDs are 3% on average, as some studies says. With two disks it's 6%, three disks 9%, four disks 12%, 5 disks 15% etc.
So with 5 drives you have 15% risk of a drive failure in year one, 15% in year two etc. So during a five year period (if that is the lifespan on the machine) you'll have 75% risk of a drive failure on a 5 drive array. But with two drives the risk is only 30%.
For SSD some studies shows 1.5% annual failure rate but some manufacturers says they have much lower failure rates. Let's assume 1% for enterprise SSDs. That means five SSDs is 5% risk of drive failure in year one. So it's 25% risk that you have a SSD drive failure in five years on 5 drive array. But only 10% risk on a two drive array.
So more equipment = more failures. So if you can manage with fewer drives I would strive for that.
-
@pete-s said in SAS SSD vs SAS HDD in a RAID 10?:
Remember that every drive you add also increases the risk that one of the disks fails.
Let's assume the annual failure rate for HDDs are 3% on average, as some studies says. With two disks it's 6%, three disks 9%, four disks 12%, 5 disks 15% etc.
It does increase, but not that quickly. With that math, you'd hit 100% with 34 drives. But you never actually get that high, even with 200 drives, you just get close.
-
@scottalanmiller said in SAS SSD vs SAS HDD in a RAID 10?:
@pete-s said in SAS SSD vs SAS HDD in a RAID 10?:
Remember that every drive you add also increases the risk that one of the disks fails.
Let's assume the annual failure rate for HDDs are 3% on average, as some studies says. With two disks it's 6%, three disks 9%, four disks 12%, 5 disks 15% etc.
It does increase, but not that quickly. With that math, you'd hit 100% with 34 drives. But you never actually get that high, even with 200 drives, you just get close.
And on the inverse, I feel like there's some sort of risk to having only a few really large drives. It's like, maybe too few massive drives are bad and too many tiny drives are bad. Somewhere in that spectrum is a statistical sweet spot, but maybe what I'm currently saying is bs..
-
@pete-s said in SAS SSD vs SAS HDD in a RAID 10?:
So more equipment = more failures. So if you can manage with fewer drives I would strive for that.
Yes, this is true. More drives, means more drive failures.
-
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@scottalanmiller said in SAS SSD vs SAS HDD in a RAID 10?:
@pete-s said in SAS SSD vs SAS HDD in a RAID 10?:
Remember that every drive you add also increases the risk that one of the disks fails.
Let's assume the annual failure rate for HDDs are 3% on average, as some studies says. With two disks it's 6%, three disks 9%, four disks 12%, 5 disks 15% etc.
It does increase, but not that quickly. With that math, you'd hit 100% with 34 drives. But you never actually get that high, even with 200 drives, you just get close.
And on the inverse, I feel like there's some sort of risk to having only a few really large drives. It's like, maybe too few massive drives are bad and too many tiny drives are bad. Somewhere in that spectrum is a statistical sweet spot, but maybe what I'm currently saying is bs..
Bit failure is related to the size of the drives (number of bits) but annual failure rate doesn't correlate to the size of the drive. Check out backblaze blog for instance on their experience using spinning rust.
-
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@scottalanmiller said in SAS SSD vs SAS HDD in a RAID 10?:
@pete-s said in SAS SSD vs SAS HDD in a RAID 10?:
Remember that every drive you add also increases the risk that one of the disks fails.
Let's assume the annual failure rate for HDDs are 3% on average, as some studies says. With two disks it's 6%, three disks 9%, four disks 12%, 5 disks 15% etc.
It does increase, but not that quickly. With that math, you'd hit 100% with 34 drives. But you never actually get that high, even with 200 drives, you just get close.
And on the inverse, I feel like there's some sort of risk to having only a few really large drives. It's like, maybe too few massive drives are bad and too many tiny drives are bad. Somewhere in that spectrum is a statistical sweet spot, but maybe what I'm currently saying is bs..
Well, mathematically, fewer larger drives present their greatest risk during a prolonged recovery. But the chance that they need to do a recovery at all is lower. If your drives are slow, and recovery takes a really long time, large sizes are riskier.
So RAID 5 and 6 suffer from large drive resilvers more. Fast SSDs in mirrored RAID handle even quite large drives very quickly. It's not the size per se that is an issue, but the time it takes to fill the drive with recovered data.
But the only risk from large drives is that recovery time. So if you run the math, I think you'll find that fewer, larger drives will always outweigh many smaller drives because the reduced chance of drive loss will overshadow the increased risk of secondary failure during a resilver. The faster the drives, the more pronounced the overshadowing. If they ever do have a tipping point, it is with parity on very slow drives (think 5400 RPM.)
-
Semi-On Topic: BackBlaze publishes their reliability rate for the tens of thousands of drives in their fleet.
https://www.backblaze.com/b2/hard-drive-test-data.html
EDIT: Which is contrary to drive manufacturer's publishing ban on said statistics AFAIR.
-
@pete-s said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@scottalanmiller said in SAS SSD vs SAS HDD in a RAID 10?:
@pete-s said in SAS SSD vs SAS HDD in a RAID 10?:
Remember that every drive you add also increases the risk that one of the disks fails.
Let's assume the annual failure rate for HDDs are 3% on average, as some studies says. With two disks it's 6%, three disks 9%, four disks 12%, 5 disks 15% etc.
It does increase, but not that quickly. With that math, you'd hit 100% with 34 drives. But you never actually get that high, even with 200 drives, you just get close.
And on the inverse, I feel like there's some sort of risk to having only a few really large drives. It's like, maybe too few massive drives are bad and too many tiny drives are bad. Somewhere in that spectrum is a statistical sweet spot, but maybe what I'm currently saying is bs..
Bit failure is related to the size of the drives (number of bits) ....
Sort of. URE failures are a factor of the size of the array minus parity, not of individual drive size.
So an array of 10TB usable space is the same URE risk (within measurable margins) whether it is 3x 5TB drives, or 11x 1TB drives or 22x 500GB drives or 44x 250GB drives.
On a per drive basis, each drive is at greater risk, sure. But to a resilver operation, the risk is identical between the different topologies of the same size array.
-
@scottalanmiller said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@scottalanmiller said in SAS SSD vs SAS HDD in a RAID 10?:
@pete-s said in SAS SSD vs SAS HDD in a RAID 10?:
Remember that every drive you add also increases the risk that one of the disks fails.
Let's assume the annual failure rate for HDDs are 3% on average, as some studies says. With two disks it's 6%, three disks 9%, four disks 12%, 5 disks 15% etc.
It does increase, but not that quickly. With that math, you'd hit 100% with 34 drives. But you never actually get that high, even with 200 drives, you just get close.
And on the inverse, I feel like there's some sort of risk to having only a few really large drives. It's like, maybe too few massive drives are bad and too many tiny drives are bad. Somewhere in that spectrum is a statistical sweet spot, but maybe what I'm currently saying is bs..
Well, mathematically, fewer larger drives present their greatest risk during a prolonged recovery. But the chance that they need to do a recovery at all is lower. If your drives are slow, and recovery takes a really long time, large sizes are riskier.
So RAID 5 and 6 suffer from large drive resilvers more. Fast SSDs in mirrored RAID handle even quite large drives very quickly. It's not the size per se that is an issue, but the time it takes to fill the drive with recovered data.
But the only risk from large drives is that recovery time. So if you run the math, I think you'll find that fewer, larger drives will always outweigh many smaller drives because the reduced chance of drive loss will overshadow the increased risk of secondary failure during a resilver. The faster the drives, the more pronounced the overshadowing. If they ever do have a tipping point, it is with parity on very slow drives (think 5400 RPM.)
hmm.. well now I don't know what to do. It's either RAID 1, 5 or 6 with SSD drives. Price tag aside, I just want whatever is going to be most reliable for the server. Pure and simple, I want to minimize the chances that a volume fails and the server goes down and I have to restore from a backup.
-
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@scottalanmiller said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
@scottalanmiller said in SAS SSD vs SAS HDD in a RAID 10?:
@pete-s said in SAS SSD vs SAS HDD in a RAID 10?:
Remember that every drive you add also increases the risk that one of the disks fails.
Let's assume the annual failure rate for HDDs are 3% on average, as some studies says. With two disks it's 6%, three disks 9%, four disks 12%, 5 disks 15% etc.
It does increase, but not that quickly. With that math, you'd hit 100% with 34 drives. But you never actually get that high, even with 200 drives, you just get close.
And on the inverse, I feel like there's some sort of risk to having only a few really large drives. It's like, maybe too few massive drives are bad and too many tiny drives are bad. Somewhere in that spectrum is a statistical sweet spot, but maybe what I'm currently saying is bs..
Well, mathematically, fewer larger drives present their greatest risk during a prolonged recovery. But the chance that they need to do a recovery at all is lower. If your drives are slow, and recovery takes a really long time, large sizes are riskier.
So RAID 5 and 6 suffer from large drive resilvers more. Fast SSDs in mirrored RAID handle even quite large drives very quickly. It's not the size per se that is an issue, but the time it takes to fill the drive with recovered data.
But the only risk from large drives is that recovery time. So if you run the math, I think you'll find that fewer, larger drives will always outweigh many smaller drives because the reduced chance of drive loss will overshadow the increased risk of secondary failure during a resilver. The faster the drives, the more pronounced the overshadowing. If they ever do have a tipping point, it is with parity on very slow drives (think 5400 RPM.)
hmm.. well now I don't know what to do. It's either RAID 1, 5 or 6 with SSD drives. Price tag aside, I just want whatever is going to be most reliable for the server.
Under normal conditions, RAID 1 blows everything else out of the water on reliability. It's both protected mathematically by having the fewest parts to cause failure. And it is vastly simpler in implementation making any implementation significantly less likely to fail. So both the drives themselves and the RAID mechanism are at their maximum for safety.
Any variation, whether parity or adding striping takes what RAID 1 has and adds both mechanical (disk) and logical (implementation) risks. It's impossible for any other RAID level to approach RAID 1 in safety.
-
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
Pure and simple, I want to minimize the chances that a volume fails and the server goes down and I have to restore from a backup.
Then RAID 1 is always your best choice, regardless of the medium it is protecting. RAID 1 is just as good as we can make it. It's the "two bricks" approach. Almost nothing to go wrong. And in real world testing, it's so stable it is impossible to measure failure rates on it. You start talking about it in atomic decay terms.
And if you want to take it to insanity levels, get a third drive and triple mirror. You get into "humanity has never witnessed a failure" level of reliability. You are more likely to be killed inside the datacenter by frozen poop falling from a passing plane than to lose those drives.
-
People don't do RAID 1 with triple drives, because at that point your drives are so safe that it's silly to spend money there. You'd be better spending it somewhere else. It's not your drives that fail, but other components.
-
@scottalanmiller said in SAS SSD vs SAS HDD in a RAID 10?:
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
Pure and simple, I want to minimize the chances that a volume fails and the server goes down and I have to restore from a backup.
Then RAID 1 is always your best choice, regardless of the medium it is protecting. RAID 1 is just as good as we can make it. It's the "two bricks" approach. Almost nothing to go wrong. And in real world testing, it's so stable it is impossible to measure failure rates on it. You start talking about it in atomic decay terms.
And if you want to take it to insanity levels, get a third drive and triple mirror. You get into "humanity has never witnessed a failure" level of reliability. You are more likely to be killed inside the datacenter by frozen poop falling from a passing plane than to lose those drives.
ok, well if I want to do a RAID 1 then, I've got these as options as they are almost 4TB:
- 3.84TB SSD SAS Read Intensive 12Gbps 512n 2.5in Hot-plug Drive, PX05SR,1 DWPD,7008 TBW - $4,673.84 /ea.
- 3.84TB SSD SAS Read Intensive 12Gb 512e 2.5in Hot-plug Drive, PM1633a,1 DWPD,7008 TBW - $4,391.49 /ea.
- 3.84TB SSD SATA Read Intensive 6Gbps 512n 2.5in Hot-plug Drive, PM863a - $3,262.09 /ea.
- 3.84TB SSD SATA Read Intensive 6Gbps 512e 2.5in Hot-plug Drive, S4500,1 DWPD,7008 TBW - $3,262.09 /ea.
And I could toss out the H740P and go back to the H330
-
@dave247 said in SAS SSD vs SAS HDD in a RAID 10?:
ok, well if I want to do a RAID 1 then, I've got these as options as they are almost 4TB:
- 3.84TB SSD SAS Read Intensive 12Gbps 512n 2.5in Hot-plug Drive, PX05SR,1 DWPD,7008 TBW - $4,673.84 /ea.
- 3.84TB SSD SAS Read Intensive 12Gb 512e 2.5in Hot-plug Drive, PM1633a,1 DWPD,7008 TBW - $4,391.49 /ea.
- 3.84TB SSD SATA Read Intensive 6Gbps 512n 2.5in Hot-plug Drive, PM863a - $3,262.09 /ea.
- 3.84TB SSD SATA Read Intensive 6Gbps 512e 2.5in Hot-plug Drive, S4500,1 DWPD,7008 TBW - $3,262.09 /ea.
And I could toss out the H740P and go back to the H330
You pay a severe Dell tax on those prices.
PM863a is a Samsung drive and the real price is around $1500.
S4500 is Intel but older slower model as the newer one is S4510. Real price on the newer model is around $1500.Don't have prices on PX05SR (Toshiba) or PM1633a (Samsung) but similar drive HGST Ultrastar SS300 is around $2800, Seagate 1200.2 is around $2500.
With real price I mean what you pay if you buy one drive from just about anywhere.
I wouldn't waste any money on SAS 12Gbps drives (unless you need dual port) because if you need maximum performance U.2 NVMe is what you want. Don't be fooled by "read intensive" either - 1 DWPD means you can write 3.8TB per day for 5 years.
