Freepbx Trunk Randomly Goes to Rejected Status
-
Does anyone who hosts Freepbx on Vultr run into an issue where your trunk randomly disconnects but then never reconnects and goes to the status of "Rejected"? I have 3 separate systems and they all randomly do this on occasion. My theory is that it may be happening during the Vultr backup at night but I am not sure how I can prove this to be true.
I found this post that describes the same issue and may consider applying this script but thought that the Trunk settings would account for this and auto reconnect.
-
-
This only happens to me with PJSIP trunks. It is always random. Some sites never have a problem.
You may want to recreate the trunk as a SIP trunk.
-
@jaredbusch - I have only used Voip.ms for all my trunks. Do you think this is a Freepbx issue or a Voip.ms issue? In theory, shouldn't the retry settings reconnect or do you think it is just timing out eventually because of a bug?
I appreciate all your feedback. Thanks!
-
@syko24 said in Freepbx Trunk Randomly Goes to Rejected Status:
@jaredbusch - I have only used Voip.ms for all my trunks. Do you think this is a Freepbx issue or a Voip.ms issue? In theory, shouldn't the retry settings reconnect or do you think it is just timing out eventually because of a bug?
I appreciate all your feedback. Thanks!
I have not had time to drop a wireshark on this to figure that out.
It is simple enough to make a SIP trunk. /me gets off his ass to go make a post about it.
-
@syko24 Here are the instructions for making a
CHAN_SIPtrunk.https://mangolassi.it/topic/12327/setting-up-a-sip-trunk-in-freepbx-13/2
-
@jaredbusch said in Freepbx Trunk Randomly Goes to Rejected Status:
@syko24 Here are the instructions for making a
CHAN_SIPtrunk.https://mangolassi.it/topic/12327/setting-up-a-sip-trunk-in-freepbx-13/2
Thanks again! So I assume you are using pjsip from phones to pbx and chan_sip on your trunks? Or have you completely switched everything to chan_sip at this point?
-
@syko24 said in Freepbx Trunk Randomly Goes to Rejected Status:
@jaredbusch said in Freepbx Trunk Randomly Goes to Rejected Status:
@syko24 Here are the instructions for making a
CHAN_SIPtrunk.https://mangolassi.it/topic/12327/setting-up-a-sip-trunk-in-freepbx-13/2
Thanks again! So I assume you are using pjsip from phones to pbx and chan_sip on your trunks? Or have you completely switched everything to chan_sip at this point?
PJSIP on phones to PBX. Always.
The key differences in PJSIP are server side enhancements. Nothing removed a SIP communication bit.
I use both SIP and PJSIP for trunks. I always try PJSIP first. If I have issues with a provider, I will switch it to SIP.
