Thoughts on how I could improve my network security?
-
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
-
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world.
But prefer doesn't mean it's a good idea. Lots of people prefer letting their sales people dictate everything, too. It's a reason why it happens, but isn't a reason why it would be a recommendation.
Also, again, bad logic. UTM doesn't mean one throat, non-UTM doesn't mean multiple throats.
-
My gut feel on this is just that marketing has convinced people that, like SAN and cloud, UTM is just "a black box you have to buy" and that you don't need to evaluate it or consider it like standard IT services. It's a "magic check box" approach and people forget, thanks to all the smoke and mirrors, that it is a server like any other with applciations like any other and should be treated as any other system, not a special case. There's nothing special or unique about a UTM, it's just services that use the router's CPU and OS as their platform rather than a server's CPU and OS.
-
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
-
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
-
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
-
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
Which is kind of the general nature of a UTM. The starting point here is a device that generally is sold on a basis of misdirection. There are use cases for a UTM, like at a branch office that needs those features but has no server whatsoever. It's not that the product category should not exist at all, but it should be an insanely rare and limited use product. Instead, it is sold as a panacea for those that want security to be a checkbox rather than having to evaluate and properly handle their needs. So that you have vendors making products and marketing products specifically around taking advantage of customers rather than meeting their needs, it follows that other aspects like sizing or configuration might not get much attention to customer needs as well.
-
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
Which is kind of the general nature of a UTM. The starting point here is a device that generally is sold on a basis of misdirection. There are use cases for a UTM, like at a branch office that needs those features but has no server whatsoever. It's not that the product category should not exist at all, but it should be an insanely rare and limited use product. Instead, it is sold as a panacea for those that want security to be a checkbox rather than having to evaluate and properly handle their needs. So that you have vendors making products and marketing products specifically around taking advantage of customers rather than meeting their needs, it follows that other aspects like sizing or configuration might not get much attention to customer needs as well.
I get what you're you're saying.. but the costs to an SMB for the research side alone could out weight the cost of the solution. Assuming you hired NTG to research options for you, that would easily be $500 just in research. Assuming you don't have a server, nor a need for a server, when you look at something like a SonicWall at $2000 for 3 years worth of updates, that's 25% of that cost.
I'm not saying there aren't times when it's needed, but as you point out, it's about business decisions.
-
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
Which is kind of the general nature of a UTM. The starting point here is a device that generally is sold on a basis of misdirection. There are use cases for a UTM, like at a branch office that needs those features but has no server whatsoever. It's not that the product category should not exist at all, but it should be an insanely rare and limited use product. Instead, it is sold as a panacea for those that want security to be a checkbox rather than having to evaluate and properly handle their needs. So that you have vendors making products and marketing products specifically around taking advantage of customers rather than meeting their needs, it follows that other aspects like sizing or configuration might not get much attention to customer needs as well.
I get what you're you're saying.. but the costs to an SMB for the research side alone could out weight the cost of the solution. Assuming you hired NTG to research options for you, that would easily be $500 just in research. Assuming you don't have a server, nor a need for a server, when you look at something like a SonicWall at $2000 for 3 years worth of updates, that's 25% of that cost.
I'm not saying there aren't times when it's needed, but as you point out, it's about business decisions.
Sadly this is what it comes down to a lot.
-
@tim_g said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
Which is kind of the general nature of a UTM. The starting point here is a device that generally is sold on a basis of misdirection. There are use cases for a UTM, like at a branch office that needs those features but has no server whatsoever. It's not that the product category should not exist at all, but it should be an insanely rare and limited use product. Instead, it is sold as a panacea for those that want security to be a checkbox rather than having to evaluate and properly handle their needs. So that you have vendors making products and marketing products specifically around taking advantage of customers rather than meeting their needs, it follows that other aspects like sizing or configuration might not get much attention to customer needs as well.
I get what you're you're saying.. but the costs to an SMB for the research side alone could out weight the cost of the solution. Assuming you hired NTG to research options for you, that would easily be $500 just in research. Assuming you don't have a server, nor a need for a server, when you look at something like a SonicWall at $2000 for 3 years worth of updates, that's 25% of that cost.
I'm not saying there aren't times when it's needed, but as you point out, it's about business decisions.
Sadly this is what it comes down to a lot.
What's worse, is you often have no clue what the research time is going to cost. If NTG, in this case, just did the same or similar research for someone else, you might get lucky and ride the coat tails of that time, but it's every bit as likely that the vendor will simply charge you the same that they charged the previous customer.
-
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
Which is kind of the general nature of a UTM. The starting point here is a device that generally is sold on a basis of misdirection. There are use cases for a UTM, like at a branch office that needs those features but has no server whatsoever. It's not that the product category should not exist at all, but it should be an insanely rare and limited use product. Instead, it is sold as a panacea for those that want security to be a checkbox rather than having to evaluate and properly handle their needs. So that you have vendors making products and marketing products specifically around taking advantage of customers rather than meeting their needs, it follows that other aspects like sizing or configuration might not get much attention to customer needs as well.
I get what you're you're saying.. but the costs to an SMB for the research side alone could out weight the cost of the solution. Assuming you hired NTG to research options for you, that would easily be $500 just in research. Assuming you don't have a server, nor a need for a server, when you look at something like a SonicWall at $2000 for 3 years worth of updates, that's 25% of that cost.
I'm not saying there aren't times when it's needed, but as you point out, it's about business decisions.
That’s a decent theory. But in the real world is not even remotely the case. The cost of research or “knowing the market” is trivially small and the oversell from vendors is insanely large.
You can see with the SonicWall, you’d save thousands knowing to not buy that one thing.
-
@dashrender said in Thoughts on how I could improve my network security?:
@tim_g said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
Which is kind of the general nature of a UTM. The starting point here is a device that generally is sold on a basis of misdirection. There are use cases for a UTM, like at a branch office that needs those features but has no server whatsoever. It's not that the product category should not exist at all, but it should be an insanely rare and limited use product. Instead, it is sold as a panacea for those that want security to be a checkbox rather than having to evaluate and properly handle their needs. So that you have vendors making products and marketing products specifically around taking advantage of customers rather than meeting their needs, it follows that other aspects like sizing or configuration might not get much attention to customer needs as well.
I get what you're you're saying.. but the costs to an SMB for the research side alone could out weight the cost of the solution. Assuming you hired NTG to research options for you, that would easily be $500 just in research. Assuming you don't have a server, nor a need for a server, when you look at something like a SonicWall at $2000 for 3 years worth of updates, that's 25% of that cost.
I'm not saying there aren't times when it's needed, but as you point out, it's about business decisions.
Sadly this is what it comes down to a lot.
What's worse, is you often have no clue what the research time is going to cost. If NTG, in this case, just did the same or similar research for someone else, you might get lucky and ride the coat tails of that time, but it's every bit as likely that the vendor will simply charge you the same that they charged the previous customer.
In reality, research time approaches zero. Just knowing the market and best practices means you pretty know good answers in seconds.
-
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@tim_g said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
Which is kind of the general nature of a UTM. The starting point here is a device that generally is sold on a basis of misdirection. There are use cases for a UTM, like at a branch office that needs those features but has no server whatsoever. It's not that the product category should not exist at all, but it should be an insanely rare and limited use product. Instead, it is sold as a panacea for those that want security to be a checkbox rather than having to evaluate and properly handle their needs. So that you have vendors making products and marketing products specifically around taking advantage of customers rather than meeting their needs, it follows that other aspects like sizing or configuration might not get much attention to customer needs as well.
I get what you're you're saying.. but the costs to an SMB for the research side alone could out weight the cost of the solution. Assuming you hired NTG to research options for you, that would easily be $500 just in research. Assuming you don't have a server, nor a need for a server, when you look at something like a SonicWall at $2000 for 3 years worth of updates, that's 25% of that cost.
I'm not saying there aren't times when it's needed, but as you point out, it's about business decisions.
Sadly this is what it comes down to a lot.
What's worse, is you often have no clue what the research time is going to cost. If NTG, in this case, just did the same or similar research for someone else, you might get lucky and ride the coat tails of that time, but it's every bit as likely that the vendor will simply charge you the same that they charged the previous customer.
In reality, research time approaches zero. Just knowing the market and best practices means you pretty know good answers in seconds.
He's talking about a place who doesn't already know the answer, which is why they'd go with a SonicWALL for example.
-
@tim_g said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@tim_g said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
Which is kind of the general nature of a UTM. The starting point here is a device that generally is sold on a basis of misdirection. There are use cases for a UTM, like at a branch office that needs those features but has no server whatsoever. It's not that the product category should not exist at all, but it should be an insanely rare and limited use product. Instead, it is sold as a panacea for those that want security to be a checkbox rather than having to evaluate and properly handle their needs. So that you have vendors making products and marketing products specifically around taking advantage of customers rather than meeting their needs, it follows that other aspects like sizing or configuration might not get much attention to customer needs as well.
I get what you're you're saying.. but the costs to an SMB for the research side alone could out weight the cost of the solution. Assuming you hired NTG to research options for you, that would easily be $500 just in research. Assuming you don't have a server, nor a need for a server, when you look at something like a SonicWall at $2000 for 3 years worth of updates, that's 25% of that cost.
I'm not saying there aren't times when it's needed, but as you point out, it's about business decisions.
Sadly this is what it comes down to a lot.
What's worse, is you often have no clue what the research time is going to cost. If NTG, in this case, just did the same or similar research for someone else, you might get lucky and ride the coat tails of that time, but it's every bit as likely that the vendor will simply charge you the same that they charged the previous customer.
In reality, research time approaches zero. Just knowing the market and best practices means you pretty know good answers in seconds.
He's talking about a place who doesn't already know the answer, which is why they'd go with a SonicWALL for example.
That’s contrived. Creating one problem to justify another. This is why you always use an ITSP if you don’t already have this knowledge in house. This isn’t a real world problem. No business has this lack of resources without deciding to not have it intentionally.
-
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
Which is kind of the general nature of a UTM. The starting point here is a device that generally is sold on a basis of misdirection. There are use cases for a UTM, like at a branch office that needs those features but has no server whatsoever. It's not that the product category should not exist at all, but it should be an insanely rare and limited use product. Instead, it is sold as a panacea for those that want security to be a checkbox rather than having to evaluate and properly handle their needs. So that you have vendors making products and marketing products specifically around taking advantage of customers rather than meeting their needs, it follows that other aspects like sizing or configuration might not get much attention to customer needs as well.
I get what you're you're saying.. but the costs to an SMB for the research side alone could out weight the cost of the solution. Assuming you hired NTG to research options for you, that would easily be $500 just in research. Assuming you don't have a server, nor a need for a server, when you look at something like a SonicWall at $2000 for 3 years worth of updates, that's 25% of that cost.
I'm not saying there aren't times when it's needed, but as you point out, it's about business decisions.
That’s a decent theory. But in the real world is not even remotely the case. The cost of research or “knowing the market” is trivially small and the oversell from vendors is insanely large.
You can see with the SonicWall, you’d save thousands knowing to not buy that one thing.
What solution would you recommend that provide the typical UTM and what's the cost? Assume the client has no infrastructure for VMs already in place, yet they need it anyhow.
-
Basically what we just circled around to us that shops lacking knowledge, skills, or don’t care but UTMs because sales people take advantage of that situation. I feel that the “why do people buy UTMs” ended being worse than just me saying “it’s a bad approach”.
-
@scottalanmiller said in Thoughts on how I could improve my network security?:
@tim_g said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@tim_g said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
Which is kind of the general nature of a UTM. The starting point here is a device that generally is sold on a basis of misdirection. There are use cases for a UTM, like at a branch office that needs those features but has no server whatsoever. It's not that the product category should not exist at all, but it should be an insanely rare and limited use product. Instead, it is sold as a panacea for those that want security to be a checkbox rather than having to evaluate and properly handle their needs. So that you have vendors making products and marketing products specifically around taking advantage of customers rather than meeting their needs, it follows that other aspects like sizing or configuration might not get much attention to customer needs as well.
I get what you're you're saying.. but the costs to an SMB for the research side alone could out weight the cost of the solution. Assuming you hired NTG to research options for you, that would easily be $500 just in research. Assuming you don't have a server, nor a need for a server, when you look at something like a SonicWall at $2000 for 3 years worth of updates, that's 25% of that cost.
I'm not saying there aren't times when it's needed, but as you point out, it's about business decisions.
Sadly this is what it comes down to a lot.
What's worse, is you often have no clue what the research time is going to cost. If NTG, in this case, just did the same or similar research for someone else, you might get lucky and ride the coat tails of that time, but it's every bit as likely that the vendor will simply charge you the same that they charged the previous customer.
In reality, research time approaches zero. Just knowing the market and best practices means you pretty know good answers in seconds.
He's talking about a place who doesn't already know the answer, which is why they'd go with a SonicWALL for example.
That’s contrived. Creating one problem to justify another. This is why you always use an ITSP if you don’t already have this knowledge in house. This isn’t a real world problem. No business has this lack of resources without deciding to not have it intentionally.
LOL - how many ITSPs sell SonicWalls? Tons of them!
-
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@tim_g said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@tim_g said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
Which is kind of the general nature of a UTM. The starting point here is a device that generally is sold on a basis of misdirection. There are use cases for a UTM, like at a branch office that needs those features but has no server whatsoever. It's not that the product category should not exist at all, but it should be an insanely rare and limited use product. Instead, it is sold as a panacea for those that want security to be a checkbox rather than having to evaluate and properly handle their needs. So that you have vendors making products and marketing products specifically around taking advantage of customers rather than meeting their needs, it follows that other aspects like sizing or configuration might not get much attention to customer needs as well.
I get what you're you're saying.. but the costs to an SMB for the research side alone could out weight the cost of the solution. Assuming you hired NTG to research options for you, that would easily be $500 just in research. Assuming you don't have a server, nor a need for a server, when you look at something like a SonicWall at $2000 for 3 years worth of updates, that's 25% of that cost.
I'm not saying there aren't times when it's needed, but as you point out, it's about business decisions.
Sadly this is what it comes down to a lot.
What's worse, is you often have no clue what the research time is going to cost. If NTG, in this case, just did the same or similar research for someone else, you might get lucky and ride the coat tails of that time, but it's every bit as likely that the vendor will simply charge you the same that they charged the previous customer.
In reality, research time approaches zero. Just knowing the market and best practices means you pretty know good answers in seconds.
He's talking about a place who doesn't already know the answer, which is why they'd go with a SonicWALL for example.
That’s contrived. Creating one problem to justify another. This is why you always use an ITSP if you don’t already have this knowledge in house. This isn’t a real world problem. No business has this lack of resources without deciding to not have it intentionally.
LOL - how many ITSPs sell SonicWalls? Tons of them!
Why would you use an ITSP that also sells things? You're talking about a VAR not an ITSP.
-
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@tim_g said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@tim_g said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@scottalanmiller said in Thoughts on how I could improve my network security?:
@dashrender said in Thoughts on how I could improve my network security?:
@dafyre said in Thoughts on how I could improve my network security?:
Some folks prefer the simplicity of having one throat to choke -- especially in the SMB world. Having run both ends of the spectrum -- that is managing a network with a UTM, vs a separate Firewall and UTM appliance, I can safely say that I prefer to keep them separated.
I saw better Network throughput and performance when keeping the various UTM functions separated out. My worst experience was with Fortinet as a UTM. Enabling IDS / IPS on this device would kill our internet almost immediately.
My best experience with a Non-UTM setup was Smoothwall. We had a Firewall, an IDS, and a Reporting box (three separate devices). Even with the IDS enabled, our internet speeds didn't take a hit.
Sure, but what is the likely reason that internet was so badly affected by you enabling IDS? I'm guessing it was underpowered hardware. Granted this is frequently the case with UTMs.
That's a common problem, for sure. Almost everyone I have spoken with that has used UTMs found them to create big time bottlenecks. Of course, this is cause by improperly sizing the UTM, but it happens all the time. I presume because of the magic black box effect - they trust that the vendor will make it able to handle the assumed workload at wire speed.
This is not an unreasonable expectation. Sadly the vendors have proven that they just don't care about their customers and provide hardware that's not up to the task.
Which is kind of the general nature of a UTM. The starting point here is a device that generally is sold on a basis of misdirection. There are use cases for a UTM, like at a branch office that needs those features but has no server whatsoever. It's not that the product category should not exist at all, but it should be an insanely rare and limited use product. Instead, it is sold as a panacea for those that want security to be a checkbox rather than having to evaluate and properly handle their needs. So that you have vendors making products and marketing products specifically around taking advantage of customers rather than meeting their needs, it follows that other aspects like sizing or configuration might not get much attention to customer needs as well.
I get what you're you're saying.. but the costs to an SMB for the research side alone could out weight the cost of the solution. Assuming you hired NTG to research options for you, that would easily be $500 just in research. Assuming you don't have a server, nor a need for a server, when you look at something like a SonicWall at $2000 for 3 years worth of updates, that's 25% of that cost.
I'm not saying there aren't times when it's needed, but as you point out, it's about business decisions.
Sadly this is what it comes down to a lot.
What's worse, is you often have no clue what the research time is going to cost. If NTG, in this case, just did the same or similar research for someone else, you might get lucky and ride the coat tails of that time, but it's every bit as likely that the vendor will simply charge you the same that they charged the previous customer.
In reality, research time approaches zero. Just knowing the market and best practices means you pretty know good answers in seconds.
He's talking about a place who doesn't already know the answer, which is why they'd go with a SonicWALL for example.
That’s contrived. Creating one problem to justify another. This is why you always use an ITSP if you don’t already have this knowledge in house. This isn’t a real world problem. No business has this lack of resources without deciding to not have it intentionally.
LOL - how many ITSPs sell SonicWalls? Tons of them!
None, those are VARs.
-
I'll correct myself.
You're right - Those are VARs.. SMBs don't know the difference between a VAR and an ITSP, and frankly, most don't want an ITSP, they want someone to handle it from soup to nuts.