Azure AD and OnPrem Windows Server 2016
-
Can you lay out the setup you put together.
Thanks -
@bigbear said in Azure AD and OnPrem Windows Server 2016:
And it's official, Azure AD only, no premise AD or synced AD, and a single RDSH deployed and working!
Lots of notes scratches out to the side.
Sweet!!
-
@Dashrender said in Azure AD and OnPrem Windows Server 2016:
Can you lay out the setup you put together.
ThanksYea I will definitely post up what I did. At the moment I am trying to connect a site to site VPN to a Vultr instance as Azure VM pricing is actually a lot higher now that I am comparing config details.
You have to deploy all this using the ASM model, it doesnt work in ARM. So using the classic GUI or ASM Powershell commands both seem to work.
1.) Create a classic vnet and subnet range in the data center where you will deploy servers that will joing AAD
2.) If you dont have Azure AD, deploy it. Its already deployed as Basic if you have Office 365. Under you AAD in the Classic Portal create a group with EXACTLY this name AAD DC Administrators Add your AAD users that will have permission to join servers to AAD, or that will manage AAD through the AD snap-ins.
3.) Under your AAD in the classic portal, go to configure. Half way down the page there is an option under domain services called Enable Domain Services For This Directory This is what provides Kueberos/NTLM to Azure AD.
Enable this and select the virtual network you created.
Eventually, under DNS Servers two IP addresses will appear. This took forever, like 20 minutes
4.) Go back to your virtual network and place those two DNS servers in your new virtual network. These will then be added to your virtual machines and are your AAD DNS Servers.
5.) At this point, for no known reason, you need to change your the Office 365 work password you are using if you have recently enabled password sync and/or user password management. I am not referring to syncing to a premise AD, that is not required. It appears to be for syncing AAD with Office 365 accounts.
6.) Deploy a Server 2016 VM in Classic Mode or using ASM powershell commands. It seems 2016 and 2012 are able to join Azure AD.
7.) Once you are in your new VM, use the FQDN (domain.com) of your active directory domain to join the domain. It will pop up for authentication. Use the UPN model without the .com. = domain\username and password. This would be any AAD user that was added to the special admin group you created above.
When you reboot you can login with your UPN or your email address if it matches the UPN model.
8.) From there, I deployed a basic RDS server and its been working great. A litty pricier than I first though, but I am working on linking the ASM Virtual Network to a VULTR deployed pfsense instance with a site to site VPN. So if that works an on premise server could also be joined. However I am sure not if this would be feasible given then any drop in internet or VPN connection would cause user's havoc.
-
Dropping a note on this. Azure AD Domain Controller services does actually charge a minimum of .15/hour, so there is a $90 minimum cost for enabling this feature.
Not really a deal killer, but as @scottalanmiller alluded to they seem to spin up an S1 instance that you cant control and manage that NTLM/Domain Controller part for you.
-
Coming from me who doesn't deal with Microsoft. This whole thread sounds soo confusing.
-
@stacksofplates said in Azure AD and OnPrem Windows Server 2016:
Coming from me who doesn't deal with Microsoft. This whole thread sounds soo confusing.
Seriously. Everything around Azure, Azure AD and AD is ridiculous and unnecessarily confusing. From confusing tech to intentionally overlapping names.
-
It sounds like a mixing of old and new ways to work.. /sigh.
-
@Dashrender said in Azure AD and OnPrem Windows Server 2016:
It sounds like a mixing of old and new ways to work.. /sigh.
That's exactly what it is. Just gatewaying to a traditional AD server.
-
At least it doesn't require on-premises AD. It's "all cloud". It just seems like they are deploying a traditional or perhaps publicly unavailable version of AD to instances you can't see.
I have found a couple Microsoft-supported ways to use RDS on Vultr. There is a workgroup mode and a Microsoft support article says deploying AD on the RDS server is appropriate in small environments where there is one server. I could then at least sync to Office 365.
I was also looking at JumpCloud, some kind of cloud directory service probably similar to Amazons. I could possibly join 2016 server to that and sync that back with Office 365. But I haven't seen anyone talking about it out there.
-
@bigbear said in Azure AD and OnPrem Windows Server 2016:
At least it doesn't require on-premises AD. It's "all cloud".
Sort of but the way you are saying it is wrong. It's the same "on premises AD" that you run, it's just hosted elsewhere, the same as we've always done. So it's nothing new. We were doing AD on Azure or AD on Vultr long before there was Azure AD.
If that is all that you are getting, you can spin up a Windows instance on Vultr, make it a DC, install your VPN of choice and ta da.
Yes, it's "all cloud" but AD was always all cloud by that logic.
-
@bigbear said in Azure AD and OnPrem Windows Server 2016:
I was also looking at JumpCloud, some kind of cloud directory service probably similar to Amazons. I could possibly join 2016 server to that and sync that back with Office 365. But I haven't seen anyone talking about it out there.
Post a thread about it, JumpCloud is in the community here.
-
@scottalanmiller said in Azure AD and OnPrem Windows Server 2016:
@bigbear said in Azure AD and OnPrem Windows Server 2016:
At least it doesn't require on-premises AD. It's "all cloud".
Sort of but the way you are saying it is wrong. It's the same "on premises AD" that you run, it's just hosted elsewhere, the same as we've always done. So it's nothing new. We were doing AD on Azure or AD on Vultr long before there was Azure AD.
If that is all that you are getting, you can spin up a Windows instance on Vultr, make it a DC, install your VPN of choice and ta da.
Yes, it's "all cloud" but AD was always all cloud by that logic.
The difference seems to be that you cant access that VM or manage it. And from what I am reading there are some differences between the Azure AD DC on a premise AD deployment. I will search back and post.
Because I didn't control a VM and DCPROMO in that whole process.
-
@bigbear said in Azure AD and OnPrem Windows Server 2016:
The difference seems to be that you cant access that VM or manage it.
Right, MS is an MSP here on your behalf. That's all.
-
Which I think isn't bad, if we had 20 or 30 users I would say it justifies the cost. But spinning up 2016 on a virtual vultr vm now to see how it performs. I had one running before but did not pay attention to the streaming video/audio stuff.
-
@bigbear said in Azure AD and OnPrem Windows Server 2016:
Which I think isn't bad, if we had 20 or 30 users I would say it justifies the cost. But spinning up 2016 on a virtual vultr vm now to see how it performs. I had one running before but did not pay attention to the streaming video/audio stuff.
The real trick here is, once you realize what it is and it is just a hosted AD server. Then that you can do that better on Vultr. Then you realize... WAIT, why am I using Windows for this? I can do it for $2.50 on Vultr with Linux!
-
@scottalanmiller said in Azure AD and OnPrem Windows Server 2016:
@bigbear said in Azure AD and OnPrem Windows Server 2016:
Which I think isn't bad, if we had 20 or 30 users I would say it justifies the cost. But spinning up 2016 on a virtual vultr vm now to see how it performs. I had one running before but did not pay attention to the streaming video/audio stuff.
The real trick here is, once you realize what it is and it is just a hosted AD server. Then that you can do that better on Vultr. Then you realize... WAIT, why am I using Windows for this? I can do it for $2.50 on Vultr with Linux!
In every case I agree except this one, lol. Giving winblows desktops to my team with access to all the CAD/Office drawings that run in windows apps is what I need.
-
@bigbear said in Azure AD and OnPrem Windows Server 2016:
@scottalanmiller said in Azure AD and OnPrem Windows Server 2016:
@bigbear said in Azure AD and OnPrem Windows Server 2016:
Which I think isn't bad, if we had 20 or 30 users I would say it justifies the cost. But spinning up 2016 on a virtual vultr vm now to see how it performs. I had one running before but did not pay attention to the streaming video/audio stuff.
The real trick here is, once you realize what it is and it is just a hosted AD server. Then that you can do that better on Vultr. Then you realize... WAIT, why am I using Windows for this? I can do it for $2.50 on Vultr with Linux!
In every case I agree except this one, lol. Giving winblows desktops to my team with access to all the CAD/Office drawings that run in windows apps is what I need.
Not what I meant. I meant your AD server, there is no reason for it to be Windows. It can be a Linux AD server running on Vultr.
-
And a Linux AD server will be something like $2.50 - $5/mo. Whereas a Windows AD server will be like $26/mo.
