ML
    • Recent
    • Categories
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    Creating users

    IT Discussion
    9
    27
    3.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • NerdyDadN
      NerdyDad
      last edited by

      Try this out. It pops up with a command prompt to ask you a few questions to get started. Once the questions are answered, it takes care of most everything else. When it is done, it should spit out a piece of paper for you to give to the new employee with the information that they need.

      I sterilized it so that you could use it in your company.

      #Imports the AD & NTFS Modules (Module 1.02)
Import-Module activedirectory
Import-Module MSOnline

#Sets Variables (Module 1.03)
$fn #First Name
$ln #Last Name
$title
$dep #Department
$loc #Location
$man #Manager
$un #Username
$officePhone
$streetAdd
$city
$ZIP
$fi #First Name Initial, will be used to figure out Username

#Getting information (Module 1.04)
Write-Host "I need some information from you first. Answer the following questions to get started."
$fn = read-host "First Name?"
$ln = Read-Host "Last Name?"
$title = Read-Host "Title?"
$dep = Read-Host "Department?"
$man = Read-Host "Manager (Username)?"
$loc = Read-Host "<location>?"

#Finding out the Username (Module 1.05)
$fi = $fn.Substring(0,1)
$un = -join ($ln, $fi)

#Sets Location information (Module 1.06)
if ($loc -eq "Loc1") { #If the user is in Loc1 (Module 1.07)
    $officePhone = "(999) 999-9999";
    $streetAdd = "123 Anywhere Drive";
    $city = "YourTown";
    $ZIP = "12345";
}
Else { #If the user is in Loc2 (Module 1.08)
    $officePhone = "(987) 654-3210";
    $streetAdd = "987 Nothere Blvd";
    $city = "Somewhere Else";
    $ZIP = "98765";
}

#Sets Password (Module 1.09)
$passwd = (Read-Host -AsSecureString "Account Password")
$password = ConvertFrom-SecureString -SecureString $passwd

$userParams = @{ #(Module 1.10)
	'Name' = $un;
	'Enabled' = $true;
	'AccountPassword' = $passwd; 
	'UserPrincipalName' = -join ($un, "@mycompany.com");
	'SamAccountName' = $un;
	'ChangePasswordAtLogon' = $false;
	'GivenName' = $fn;
	'Surname' = $ln;
	'DisplayName' = -join ($fn, " ", $ln);
	'Description' = $title;
	'OfficePhone' = $officePhone;
	'StreetAddress' =  $streetAdd;
	'City' = $city;
	'State' = "Texas";
	'PostalCode' = $ZIP;
	'Title' = $title;
	'Department' = $dep;
	'Company' = 'MyCompany';
	'Manager' = $man;
}

#Creates the user in AD (Module 1.11)
New-ADUser @userParams

#Wait for the account to be created before doing anything else (Module 1.12)
Start-Sleep -Seconds 10

#Makes the user's network drive, scan folder, and sets the permissions to their folders and files (Module 1.13)
if ($loc -eq "Loc1") { #If the user is in Loc1 (Module 1.14)
New-Item -Name $un -ItemType directory -Path "\\server\folder\" #Creates users network drive
New-Item -Name scans -ItemType directory -Path "\\server\folder\$un\" #Creates users scan folder
}
Else { #If the user is in Loc2 (Module 1.15)
New-Item -Name $un -ItemType directory -Path "\\server\folder\" #Creates users network drive
New-Item -Name scans -ItemType directory -Path "\\server\folder\$un" #Creates users scan folder
}

#Adds the user to the correct Security Group for permissions and other network drives
if ($dep -eq "Accounting"){ #(Module 1.16)
Add-ADGroupMember -Identity 'Accounting' -Members $un #(Module 1.17)
} #Adds the user to the Accounting Group
Elseif ($dep -eq "Customer Service") { #(Module 1.18)
Add-ADGroupMember -Identity 'Customer Service' -Members $un #(Module 1.19)
} #Adds the user to the Customer Service Group
Elseif ($dep -eq "Executives") { #(Module 1.20)
Add-ADGroupMember -Identity 'Executives' -Members $un #(Module 1.21)
} #Adds the user to the Executives Group
Elseif ($dep -eq "HR") { #(Module 1.22)
Add-ADGroupMember -Identity 'Human Resources' -Members $un #(Module 1.23)
} #Adds the user to the Human Resources Group
Elseif ($dep -eq "Human Resources") { #(Module 1.24)
Add-ADGroupMember -Identity 'Human Resources' -Members $un #(Module 1.25)
} #Adds the user to the Human Resources Group
Elseif ($dep -eq "IT") { #(Module 1.26)
Add-ADGroupMember -Identity 'Domain Admins' -Members $un #(Module 1.27)
} #Adds the user to the Domain Admins Group for IT
Elseif ($dep -eq "Maintenance") { #(Module 1.28)
Add-ADGroupMember -Identity 'MaintGroup' -Members $un #(Module 1.29)
} #Adds the user to the Maintenance Group
Elseif ($dep -eq "Production") { #(Module 1.30)
Add-ADGroupMember -Identity 'Production' -Members $un #(Module 1.31)
} #Adds the user to the Production GroupHR
Elseif ($dep -eq "QA") {  #(Module 1.32)
Add-ADGroupMember -Identity 'QA Group' -Members $un #(Module 1.33)
} #Adds the user to the QA Group
Elseif ($dep -eq "Quality Assurance") {  #(Module 1.34)
Add-ADGroupMember -Identity 'QA Group' -Members $un #(Module 1.35)
} #Adds the user to the QA Group
Elseif ($dep -eq "Shipping") {  #(Module 1.36)
Add-ADGroupMember -Identity 'SHIP' -Members $un #(Module 1.37)
} #Adds the user to the Shipping Group
Else { #(Module 1.38)
Add-ADGroupMember -Identity 'Domain Users' -Members $un #(Module 1.39)
} #Dumps the user to the Domain Users Group

$manfn = Get-ADUser $man -Properties Name | select Name #Gets the manager's name (Module 1.40)

#Creates a report of the User's information
$report = "Hello $fn $ln,

From the IT Department, welcome to <MyCompany>.   We 
are here to help you connect to the resources that you need for 
your job.   If you need assistance with technology, please feel 
free to contact us at either the help page, which is set as your 
home page in Internet Explorer, email us at 
helpdesk@<MyCompany>.com, or call us at extension 4357.

Below you will find your information so that you can login to 
the network and get started:

Your username is domain\$un
Your password is 
Your email address is $fn$ln@<MyCompany>.com
Your phone number is $officePhone Ext. 

It is suggested that you change your password to something that 
you can remember but difficult enough that somebody else cannot 
figure out.   The requirement is only 6 characters, but we do 
advise on making it longer, throw some numbers and special 
characters in there as well to make it stronger.   Best advice 
would be to use a pass-PHRASE instead of a pass-WORD.

Your computer should already be setup with your email loaded and 
your network drives.   At <MyCompany>, we use Microsoft 
Outlook as the email client.   Depending on what department you 
are in will depend on what drives you have available.   
Generally, everybody will have an F: drive and a G: drive.   The 
F: drive is your network folder.   Place in there the documents 
that you feel you cannot do your job without.   In the F: drive 
will be a scan folder.   When you go to the Xerox to scan in 
documents, then you will find them in your scan folder.   The G: 
drive is a company-wide shared folder.  As for your department 
drives, it would be best to talk with $($manfn.name), 
your supervisor/manager, about the nature and uses of these drives.

The use of the equipment and resources provided are a privilege 
to you for use and should not be taken advantage of.   There are 
measures set in place that allows us to manage the network.   Do 
not assume that there is any personal privacy on this network.   
The only privacy that you can assume is for the nature of your 
work.   All information (including emails, documents, 
spreadsheets, pictures, etc.) contained on the equipment 
provided and on the network is the sole property of Standard 
Meat Company.

If you have problems with your equipment or network resources, 
please feel free to ask.   We do not mind helping, but we cannot 
help if we do not know, so please ask! 

Sincerely,


Your IT Department"

if ($loc -eq "Loc1") { #(Module 1.43)
Write-Output $report | Out-Printer
}
Else { #(Module 1.44)
Write-Output $report | Out-Printer \\server\'Xerox WorkCentre 4260'
}

#Waiting for AD & Azure to Synchronize, which synchronizes every 30 minutes (Module 1.45)
Write-host "Waiting..."
Start-Sleep -Seconds 1800

#Connect to O365 and licenses the user
Connect-MsolService #(Module 1.46)
Set-MsolUserLicense -UserPrincipalName (-join($un,'@<MyCompany>.com')) -AddLicenses #(Module 1.47)

#Connects to the Exchange box, creates the users email account, then disconnects from the Exchange box
$mail = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://outlook.office365.com/powershell-liveid/ -AllowRedirection -Authentication Basic -Credential $cred #(Module 1.48-Part 1)
Import-PSSession $mail -WarningAction SilentlyContinue | Out-Null #(Module 1.48-Part 2)
enable-Mailbox -Identity $un -Alias $un -DisplayName (-join($fn,$ln)) #Creates the users mailbox (Module 1.49)
IF ($dep -eq "Executives") { #(Module 1.50)
Set-Mailbox (-join($un,'@<MyCompany>.com')) -ProhibitSendQuota 19.5GB -ProhibitSendReceiveQuota 20GB -IssueWarningQuota 19GB #Sets the mailbox size in Exchange Online so that the user isn't using all 50 GB of storage (Module 1.51)
} #If they are an executive, then they get 20 GB of mailbox space
elseif ($dep -eq "IT") { #(Module 1.52)
Set-Mailbox (-join($un,'@<MyCompany>.com')) #(Module 1.53)
} #IT gets the full mailbox, of course 
else { #(Module 1.54)
Set-Mailbox (-join($un,'@<MyCompany>.com')) -ProhibitSendQuota 9.5GB -ProhibitSendReceiveQuota 10GB -IssueWarningQuota 9GB #Sets the mailbox size in Exchange Online so that the user isn't using all 50 GB of storage (Module 1.55)
} #Otherwise, everybody else gets 10 GB of mailbox space
Remove-PSSession -Session $mail #Disconnects from the Exchange box (Module 1.56)
      GreyG ObsolesceO 2 Replies Last reply Reply Quote 6
      • GreyG
        Grey @NerdyDad
        last edited by

        @NerdyDad said in Creating users:

        Try this out. It pops up with a command prompt to ask you a few questions to get started. Once the questions are answered, it takes care of most everything else. When it is done, it should spit out a piece of paper for you to give to the new employee with the information that they need.

        I sterilized it so that you could use it in your company.

        #Imports the AD & NTFS Modules (Module 1.02)
Import-Module activedirectory
Import-Module MSOnline

#Sets Variables (Module 1.03)
$fn #First Name
$ln #Last Name
$title
$dep #Department
$loc #Location
$man #Manager
$un #Username
$officePhone
$streetAdd
$city
$ZIP
$fi #First Name Initial, will be used to figure out Username

#Getting information (Module 1.04)
Write-Host "I need some information from you first. Answer the following questions to get started."
$fn = read-host "First Name?"
$ln = Read-Host "Last Name?"
$title = Read-Host "Title?"
$dep = Read-Host "Department?"
$man = Read-Host "Manager (Username)?"
$loc = Read-Host "<location>?"

#Finding out the Username (Module 1.05)
$fi = $fn.Substring(0,1)
$un = -join ($ln, $fi)

#Sets Location information (Module 1.06)
if ($loc -eq "Loc1") { #If the user is in Loc1 (Module 1.07)
    $officePhone = "(999) 999-9999";
    $streetAdd = "123 Anywhere Drive";
    $city = "YourTown";
    $ZIP = "12345";
}
Else { #If the user is in Loc2 (Module 1.08)
    $officePhone = "(987) 654-3210";
    $streetAdd = "987 Nothere Blvd";
    $city = "Somewhere Else";
    $ZIP = "98765";
}

#Sets Password (Module 1.09)
$passwd = (Read-Host -AsSecureString "Account Password")
$password = ConvertFrom-SecureString -SecureString $passwd

$userParams = @{ #(Module 1.10)
	'Name' = $un;
	'Enabled' = $true;
	'AccountPassword' = $passwd; 
	'UserPrincipalName' = -join ($un, "@mycompany.com");
	'SamAccountName' = $un;
	'ChangePasswordAtLogon' = $false;
	'GivenName' = $fn;
	'Surname' = $ln;
	'DisplayName' = -join ($fn, " ", $ln);
	'Description' = $title;
	'OfficePhone' = $officePhone;
	'StreetAddress' =  $streetAdd;
	'City' = $city;
	'State' = "Texas";
	'PostalCode' = $ZIP;
	'Title' = $title;
	'Department' = $dep;
	'Company' = 'MyCompany';
	'Manager' = $man;
}

#Creates the user in AD (Module 1.11)
New-ADUser @userParams

#Wait for the account to be created before doing anything else (Module 1.12)
Start-Sleep -Seconds 10

#Makes the user's network drive, scan folder, and sets the permissions to their folders and files (Module 1.13)
if ($loc -eq "Loc1") { #If the user is in Loc1 (Module 1.14)
New-Item -Name $un -ItemType directory -Path "\\server\folder\" #Creates users network drive
New-Item -Name scans -ItemType directory -Path "\\server\folder\$un\" #Creates users scan folder
}
Else { #If the user is in Loc2 (Module 1.15)
New-Item -Name $un -ItemType directory -Path "\\server\folder\" #Creates users network drive
New-Item -Name scans -ItemType directory -Path "\\server\folder\$un" #Creates users scan folder
}

#Adds the user to the correct Security Group for permissions and other network drives
if ($dep -eq "Accounting"){ #(Module 1.16)
Add-ADGroupMember -Identity 'Accounting' -Members $un #(Module 1.17)
} #Adds the user to the Accounting Group
Elseif ($dep -eq "Customer Service") { #(Module 1.18)
Add-ADGroupMember -Identity 'Customer Service' -Members $un #(Module 1.19)
} #Adds the user to the Customer Service Group
Elseif ($dep -eq "Executives") { #(Module 1.20)
Add-ADGroupMember -Identity 'Executives' -Members $un #(Module 1.21)
} #Adds the user to the Executives Group
Elseif ($dep -eq "HR") { #(Module 1.22)
Add-ADGroupMember -Identity 'Human Resources' -Members $un #(Module 1.23)
} #Adds the user to the Human Resources Group
Elseif ($dep -eq "Human Resources") { #(Module 1.24)
Add-ADGroupMember -Identity 'Human Resources' -Members $un #(Module 1.25)
} #Adds the user to the Human Resources Group
Elseif ($dep -eq "IT") { #(Module 1.26)
Add-ADGroupMember -Identity 'Domain Admins' -Members $un #(Module 1.27)
} #Adds the user to the Domain Admins Group for IT
Elseif ($dep -eq "Maintenance") { #(Module 1.28)
Add-ADGroupMember -Identity 'MaintGroup' -Members $un #(Module 1.29)
} #Adds the user to the Maintenance Group
Elseif ($dep -eq "Production") { #(Module 1.30)
Add-ADGroupMember -Identity 'Production' -Members $un #(Module 1.31)
} #Adds the user to the Production GroupHR
Elseif ($dep -eq "QA") {  #(Module 1.32)
Add-ADGroupMember -Identity 'QA Group' -Members $un #(Module 1.33)
} #Adds the user to the QA Group
Elseif ($dep -eq "Quality Assurance") {  #(Module 1.34)
Add-ADGroupMember -Identity 'QA Group' -Members $un #(Module 1.35)
} #Adds the user to the QA Group
Elseif ($dep -eq "Shipping") {  #(Module 1.36)
Add-ADGroupMember -Identity 'SHIP' -Members $un #(Module 1.37)
} #Adds the user to the Shipping Group
Else { #(Module 1.38)
Add-ADGroupMember -Identity 'Domain Users' -Members $un #(Module 1.39)
} #Dumps the user to the Domain Users Group

$manfn = Get-ADUser $man -Properties Name | select Name #Gets the manager's name (Module 1.40)

#Creates a report of the User's information
$report = "Hello $fn $ln,

From the IT Department, welcome to <MyCompany>.   We 
are here to help you connect to the resources that you need for 
your job.   If you need assistance with technology, please feel 
free to contact us at either the help page, which is set as your 
home page in Internet Explorer, email us at 
helpdesk@<MyCompany>.com, or call us at extension 4357.

Below you will find your information so that you can login to 
the network and get started:

Your username is domain\$un
Your password is 
Your email address is $fn$ln@<MyCompany>.com
Your phone number is $officePhone Ext. 

It is suggested that you change your password to something that 
you can remember but difficult enough that somebody else cannot 
figure out.   The requirement is only 6 characters, but we do 
advise on making it longer, throw some numbers and special 
characters in there as well to make it stronger.   Best advice 
would be to use a pass-PHRASE instead of a pass-WORD.

Your computer should already be setup with your email loaded and 
your network drives.   At <MyCompany>, we use Microsoft 
Outlook as the email client.   Depending on what department you 
are in will depend on what drives you have available.   
Generally, everybody will have an F: drive and a G: drive.   The 
F: drive is your network folder.   Place in there the documents 
that you feel you cannot do your job without.   In the F: drive 
will be a scan folder.   When you go to the Xerox to scan in 
documents, then you will find them in your scan folder.   The G: 
drive is a company-wide shared folder.  As for your department 
drives, it would be best to talk with $($manfn.name), 
your supervisor/manager, about the nature and uses of these drives.

The use of the equipment and resources provided are a privilege 
to you for use and should not be taken advantage of.   There are 
measures set in place that allows us to manage the network.   Do 
not assume that there is any personal privacy on this network.   
The only privacy that you can assume is for the nature of your 
work.   All information (including emails, documents, 
spreadsheets, pictures, etc.) contained on the equipment 
provided and on the network is the sole property of Standard 
Meat Company.

If you have problems with your equipment or network resources, 
please feel free to ask.   We do not mind helping, but we cannot 
help if we do not know, so please ask! 

Sincerely,


Your IT Department"

if ($loc -eq "Loc1") { #(Module 1.43)
Write-Output $report | Out-Printer
}
Else { #(Module 1.44)
Write-Output $report | Out-Printer \\server\'Xerox WorkCentre 4260'
}

#Waiting for AD & Azure to Synchronize, which synchronizes every 30 minutes (Module 1.45)
Write-host "Waiting..."
Start-Sleep -Seconds 1800

#Connect to O365 and licenses the user
Connect-MsolService #(Module 1.46)
Set-MsolUserLicense -UserPrincipalName (-join($un,'@<MyCompany>.com')) -AddLicenses #(Module 1.47)

#Connects to the Exchange box, creates the users email account, then disconnects from the Exchange box
$mail = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://outlook.office365.com/powershell-liveid/ -AllowRedirection -Authentication Basic -Credential $cred #(Module 1.48-Part 1)
Import-PSSession $mail -WarningAction SilentlyContinue | Out-Null #(Module 1.48-Part 2)
enable-Mailbox -Identity $un -Alias $un -DisplayName (-join($fn,$ln)) #Creates the users mailbox (Module 1.49)
IF ($dep -eq "Executives") { #(Module 1.50)
Set-Mailbox (-join($un,'@<MyCompany>.com')) -ProhibitSendQuota 19.5GB -ProhibitSendReceiveQuota 20GB -IssueWarningQuota 19GB #Sets the mailbox size in Exchange Online so that the user isn't using all 50 GB of storage (Module 1.51)
} #If they are an executive, then they get 20 GB of mailbox space
elseif ($dep -eq "IT") { #(Module 1.52)
Set-Mailbox (-join($un,'@<MyCompany>.com')) #(Module 1.53)
} #IT gets the full mailbox, of course 
else { #(Module 1.54)
Set-Mailbox (-join($un,'@<MyCompany>.com')) -ProhibitSendQuota 9.5GB -ProhibitSendReceiveQuota 10GB -IssueWarningQuota 9GB #Sets the mailbox size in Exchange Online so that the user isn't using all 50 GB of storage (Module 1.55)
} #Otherwise, everybody else gets 10 GB of mailbox space
Remove-PSSession -Session $mail #Disconnects from the Exchange box (Module 1.56)

        This looks amazing and I can't wait to get it edited and try it out.

        JaredBuschJ 1 Reply Last reply Reply Quote 2
        • JaredBuschJ
          JaredBusch @Grey
          last edited by

          @Grey you aren't the only one

          1 Reply Last reply Reply Quote 0
          • NerdyDadN
            NerdyDad
            last edited by

            Here is another copy of the same code, but for a local exchange box instead of O365.

            #Imports the AD
Import-Module activedirectory

#Sets Variables
$fn #First Name
$ln #Last Name
$title
$dep #Department
$loc #Location
$man #Manager
$un #Username
$officePhone
$streetAdd
$city
$ZIP
$fi #First Name Initial, will be used to figure out Username

#Getting information
$fn = read-host "First Name?"
$ln = Read-Host "Last Name?"
$title = Read-Host "Title?"
$dep = Read-Host "Department?"
$man = Read-Host "Manager (Username)?"
$loc = Read-Host "Loc1 or Loc2?"

#Finding out the Username
$fi = $fn.Substring(0,1)
$un = -join ($ln, $fi)

#Sets Location information (Module 1.06)
if ($loc -eq "Loc1") { #If the user is in Loc1 (Module 1.07)
    $officePhone = "(999) 999-9999";
    $streetAdd = "123 Anywhere Drive";
    $city = "YourTown";
    $ZIP = "12345";
}
Else { #If the user is in Loc2 (Module 1.08)
    $officePhone = "(987) 654-3210";
    $streetAdd = "987 Nothere Blvd";
    $city = "Somewhere Else";
    $ZIP = "98765";
}

#Sets Password
$passwd = (Read-Host -AsSecureString "Account Password")
$password = ConvertFrom-SecureString -SecureString $passwd

$userParams = @{
	'Name' = $un;
	'Enabled' = $true;
	'AccountPassword' = $passwd; 
	'UserPrincipalName' = -join ($un, "@smc.com");
	'SamAccountName' = $un;
	'ChangePasswordAtLogon' = $false;
	'GivenName' = $fn;
	'Surname' = $ln;
	'DisplayName' = -join ($fn," ",$ln);
	'Description' = $title;
	'OfficePhone' = $officePhone;
	'StreetAddress' =  $streetAdd;
	'City' = $city;
	'State' = "Texas";
	'PostalCode' = $ZIP;
	'Title' = $title;
	'Department' = $dep;
	'Company' = 'Standard Meat Company';
	'Manager' = $man;
}

#Creates the user in AD
New-ADUser @userParams

#Wait for the account to be created before doing anything else
Start-Sleep -Seconds 10

#Makes the user's network drive, scan folder, and sets the permissions to their folders and files
if ($loc -eq "Loc1") { #If the user is in Loc1
New-Item -Name $un -ItemType directory -Path "\\server\folder\" #Creates users network drive
New-Item -Name scans -ItemType directory -Path "\\server\folder\$un\" #Creates users scan folder
}
Else { #If the user is in Loc2
New-Item -Name $un -ItemType directory -Path "\\server\folder\" #Creates users network drive
New-Item -Name scans -ItemType directory -Path "\\server\folder\$un" #Creates users scan folder
}

#Adds the user to the correct Security Group for permissions and other network drives
if ($dep -eq "Accounting"){
Add-ADGroupMember -Identity 'Accounting' -Members $un
} #Adds the user to the Accounting Group
Elseif ($dep -eq "Customer Service") {
Add-ADGroupMember -Identity 'Customer Service' -Members $un
} #Adds the user to the Customer Service Group
Elseif ($dep -eq "HR") {
Add-ADGroupMember -Identity 'Human Resources' -Members $un
} #Adds the user to the Human Resources Group
Elseif ($dep -eq "Human Resources") {
Add-ADGroupMember -Identity 'Human Resources' -Members $un
} #Adds the user to the Human Resources Group
Elseif ($dep -eq "IT") {
Add-ADGroupMember -Identity 'Domain Admins' -Members $un
} #Adds the user to the Domain Admins Group for IT
Elseif ($dep -eq "Maintenance") {
Add-ADGroupMember -Identity 'MaintGroup' -Members $un
} #Adds the user to the Maintenance Group
Elseif ($dep -eq "Production") {
Add-ADGroupMember -Identity 'Production' -Members $un
} #Adds the user to the Production Group
Elseif ($dep -eq "QA") { 
Add-ADGroupMember -Identity 'QA Group' -Members $un
} #Adds the user to the QA Group
Elseif ($dep -eq "Quality Assurance") { 
Add-ADGroupMember -Identity 'QA Group' -Members $un
} #Adds the user to the QA Group
Elseif ($dep -eq "Shipping") { 
Add-ADGroupMember -Identity 'SHIP' -Members $un
} #Adds the user to the Shipping Group
Else {
Add-ADGroupMember -Identity 'Domain Users' -Members $un
} #Dumps the user to the Domain Users Group

#Connects to the Exchange box, creates the users email account, then disconnects from the Exchange box
$mail = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri http://<exchange>/powershell -name <exchange> -Authentication Kerberos -Credential $cred
Import-PSSession $mail -WarningAction SilentlyContinue | Out-Null
enable-Mailbox -Identity $un -Alias $un -DisplayName (-join($fn,$ln)) #Creates the users mailbox
Remove-PSSession -Session $mail #Disconnects from the Exchange box

$manfn = Get-ADUser $man -Properties GivenName | select GivenName #Gets the managers first name
$manln = Get-ADUser $man -Properties SurName | select SurName #Gets the managers last name

#Create a report of the User's information
$report = "Hello $fn $ln,

From the IT Department, welcome to <MyCompany>.   We 
are here to help you connect to the resources that you need for 
your job.   If you need assistance with technology, please feel 
free to contact us at either the help page, which is set as your 
home page in Internet Explorer, email us at 
[email protected], or call us at extension 4357.

Below you will find your information so that you can login to 
the network and get started:

Your username is smc\$un
Your password is 
Your email address is $fn$ln@<MyCompany>.com
Your phone number is $officePhone Ext. 

It is suggested that you change your password to something that 
you can remember but difficult enough that somebody else cannot 
figure out.   The requirement is only 6 characters, but we do 
advise on making it longer, throw some numbers and special 
characters in there as well to make it stronger.   Best advice 
would be to use a pass-PHRASE instead of a pass-WORD.

Your computer should already be setup with your email loaded and 
your network drives.   At Standard Meat, we use Microsoft 
Outlook as the email client.   Depending on what department you 
are in will depend on what drives you have available.   
Generally, everybody will have an F: drive and a G: drive.   The 
F: drive is your network folder.   Place in there the documents 
that you feel you cannot do your job without.   In the F: drive 
will be a scan folder.   When you go to the Xerox to scan in 
documents, then you will find them in your scan folder.   The G: 
drive is a company-wide shared folder.  As for your department 
drives, it would be best to talk with $($manfn.name), 
your supervisor/manager about the nature and uses of these drives.

The use of the equipment and resources provided are a privilege 
to you for use and should not be taken advantage of.   There are 
measures set in place that allows us to manage the network.   Do 
not assume that there is any personal privacy on this network.   
The only privacy that you can assume is for the nature of your 
work.   All information (including emails, documents, 
spreadsheets, pictures, etc.) contained on the equipment 
provided and on the network is the sole property of Standard 
Meat Company.

If you have problems with your equipment or network resources, 
please feel free to ask.   We do not mind helping, but we cannot 
help if we do not know, so please ask! 

Sincerely,


Your IT Department"

if ($loc -eq "Loc1") {
Write-Output $report | Out-Printer \\server\Printer
}
Else {
Write-Output $report | Out-Printer \\server\Printer
}
            JaredBuschJ black3dynamiteB jt1001001J 3 Replies Last reply Reply Quote 4
            • JaredBuschJ
              JaredBusch @NerdyDad
              last edited by

              @NerdyDad said in Creating users:

              Here is another copy of the same code, but for a local exchange box instead of O365.

              #Imports the AD
Import-Module activedirectory

#Sets Variables
$fn #First Name
$ln #Last Name
$title
$dep #Department
$loc #Location
$man #Manager
$un #Username
$officePhone
$streetAdd
$city
$ZIP
$fi #First Name Initial, will be used to figure out Username

#Getting information
$fn = read-host "First Name?"
$ln = Read-Host "Last Name?"
$title = Read-Host "Title?"
$dep = Read-Host "Department?"
$man = Read-Host "Manager (Username)?"
$loc = Read-Host "Loc1 or Loc2?"

#Finding out the Username
$fi = $fn.Substring(0,1)
$un = -join ($ln, $fi)

#Sets Location information (Module 1.06)
if ($loc -eq "Loc1") { #If the user is in Loc1 (Module 1.07)
    $officePhone = "(999) 999-9999";
    $streetAdd = "123 Anywhere Drive";
    $city = "YourTown";
    $ZIP = "12345";
}
Else { #If the user is in Loc2 (Module 1.08)
    $officePhone = "(987) 654-3210";
    $streetAdd = "987 Nothere Blvd";
    $city = "Somewhere Else";
    $ZIP = "98765";
}

#Sets Password
$passwd = (Read-Host -AsSecureString "Account Password")
$password = ConvertFrom-SecureString -SecureString $passwd

$userParams = @{
	'Name' = $un;
	'Enabled' = $true;
	'AccountPassword' = $passwd; 
	'UserPrincipalName' = -join ($un, "@smc.com");
	'SamAccountName' = $un;
	'ChangePasswordAtLogon' = $false;
	'GivenName' = $fn;
	'Surname' = $ln;
	'DisplayName' = -join ($fn," ",$ln);
	'Description' = $title;
	'OfficePhone' = $officePhone;
	'StreetAddress' =  $streetAdd;
	'City' = $city;
	'State' = "Texas";
	'PostalCode' = $ZIP;
	'Title' = $title;
	'Department' = $dep;
	'Company' = 'Standard Meat Company';
	'Manager' = $man;
}

#Creates the user in AD
New-ADUser @userParams

#Wait for the account to be created before doing anything else
Start-Sleep -Seconds 10

#Makes the user's network drive, scan folder, and sets the permissions to their folders and files
if ($loc -eq "Loc1") { #If the user is in Loc1
New-Item -Name $un -ItemType directory -Path "\\server\folder\" #Creates users network drive
New-Item -Name scans -ItemType directory -Path "\\server\folder\$un\" #Creates users scan folder
}
Else { #If the user is in Loc2
New-Item -Name $un -ItemType directory -Path "\\server\folder\" #Creates users network drive
New-Item -Name scans -ItemType directory -Path "\\server\folder\$un" #Creates users scan folder
}

#Adds the user to the correct Security Group for permissions and other network drives
if ($dep -eq "Accounting"){
Add-ADGroupMember -Identity 'Accounting' -Members $un
} #Adds the user to the Accounting Group
Elseif ($dep -eq "Customer Service") {
Add-ADGroupMember -Identity 'Customer Service' -Members $un
} #Adds the user to the Customer Service Group
Elseif ($dep -eq "HR") {
Add-ADGroupMember -Identity 'Human Resources' -Members $un
} #Adds the user to the Human Resources Group
Elseif ($dep -eq "Human Resources") {
Add-ADGroupMember -Identity 'Human Resources' -Members $un
} #Adds the user to the Human Resources Group
Elseif ($dep -eq "IT") {
Add-ADGroupMember -Identity 'Domain Admins' -Members $un
} #Adds the user to the Domain Admins Group for IT
Elseif ($dep -eq "Maintenance") {
Add-ADGroupMember -Identity 'MaintGroup' -Members $un
} #Adds the user to the Maintenance Group
Elseif ($dep -eq "Production") {
Add-ADGroupMember -Identity 'Production' -Members $un
} #Adds the user to the Production Group
Elseif ($dep -eq "QA") { 
Add-ADGroupMember -Identity 'QA Group' -Members $un
} #Adds the user to the QA Group
Elseif ($dep -eq "Quality Assurance") { 
Add-ADGroupMember -Identity 'QA Group' -Members $un
} #Adds the user to the QA Group
Elseif ($dep -eq "Shipping") { 
Add-ADGroupMember -Identity 'SHIP' -Members $un
} #Adds the user to the Shipping Group
Else {
Add-ADGroupMember -Identity 'Domain Users' -Members $un
} #Dumps the user to the Domain Users Group

#Connects to the Exchange box, creates the users email account, then disconnects from the Exchange box
$mail = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri http://<exchange>/powershell -name <exchange> -Authentication Kerberos -Credential $cred
Import-PSSession $mail -WarningAction SilentlyContinue | Out-Null
enable-Mailbox -Identity $un -Alias $un -DisplayName (-join($fn,$ln)) #Creates the users mailbox
Remove-PSSession -Session $mail #Disconnects from the Exchange box

$manfn = Get-ADUser $man -Properties GivenName | select GivenName #Gets the managers first name
$manln = Get-ADUser $man -Properties SurName | select SurName #Gets the managers last name

#Create a report of the User's information
$report = "Hello $fn $ln,

From the IT Department, welcome to <MyCompany>.   We 
are here to help you connect to the resources that you need for 
your job.   If you need assistance with technology, please feel 
free to contact us at either the help page, which is set as your 
home page in Internet Explorer, email us at 
[email protected], or call us at extension 4357.

Below you will find your information so that you can login to 
the network and get started:

Your username is smc\$un
Your password is 
Your email address is $fn$ln@<MyCompany>.com
Your phone number is $officePhone Ext. 

It is suggested that you change your password to something that 
you can remember but difficult enough that somebody else cannot 
figure out.   The requirement is only 6 characters, but we do 
advise on making it longer, throw some numbers and special 
characters in there as well to make it stronger.   Best advice 
would be to use a pass-PHRASE instead of a pass-WORD.

Your computer should already be setup with your email loaded and 
your network drives.   At Standard Meat, we use Microsoft 
Outlook as the email client.   Depending on what department you 
are in will depend on what drives you have available.   
Generally, everybody will have an F: drive and a G: drive.   The 
F: drive is your network folder.   Place in there the documents 
that you feel you cannot do your job without.   In the F: drive 
will be a scan folder.   When you go to the Xerox to scan in 
documents, then you will find them in your scan folder.   The G: 
drive is a company-wide shared folder.  As for your department 
drives, it would be best to talk with $($manfn.name), 
your supervisor/manager about the nature and uses of these drives.

The use of the equipment and resources provided are a privilege 
to you for use and should not be taken advantage of.   There are 
measures set in place that allows us to manage the network.   Do 
not assume that there is any personal privacy on this network.   
The only privacy that you can assume is for the nature of your 
work.   All information (including emails, documents, 
spreadsheets, pictures, etc.) contained on the equipment 
provided and on the network is the sole property of Standard 
Meat Company.

If you have problems with your equipment or network resources, 
please feel free to ask.   We do not mind helping, but we cannot 
help if we do not know, so please ask! 

Sincerely,


Your IT Department"

if ($loc -eq "Loc1") {
Write-Output $report | Out-Printer \\server\Printer
}
Else {
Write-Output $report | Out-Printer \\server\Printer
}

              You just won the Internet for me today

              1 Reply Last reply Reply Quote 3
              • black3dynamiteB
                black3dynamite @NerdyDad
                last edited by

                @NerdyDad
                Thank you for the sharing your scripts.

                NerdyDadN 1 Reply Last reply Reply Quote 1
                • NerdyDadN
                  NerdyDad @black3dynamite
                  last edited by

                  @black3dynamite said in Creating users:

                  @NerdyDad
                  Thank you for the sharing your scripts.

                  Not a problem. I am looking to expand my PS skills. If anybody has any requests, I'd do my best to get something out for you.

                  1 Reply Last reply Reply Quote 0
                  • jt1001001J
                    jt1001001 @NerdyDad
                    last edited by

                    @NerdyDad MIND.....BLOWN!

                    1 Reply Last reply Reply Quote 1
                    • momurdaM
                      momurda
                      last edited by

                      I have 2 users starting next week, might have to use your script @NerdyDad
                      I usually just use the Copy User function in ADUC then fill out the name, make adjustments to group membership.
                      That looks essentially like the Copy User option from ADUC, but in PS, and it makes folders and such too.
                      I wonder though, are users able to answer these questions about themselves?

                      NerdyDadN 1 Reply Last reply Reply Quote 0
                      • NerdyDadN
                        NerdyDad @momurda
                        last edited by

                        @momurda said in Creating users:

                        I have 2 users starting next week, might have to use your script @NerdyDad
                        I usually just use the Copy User function in ADUC then fill out the name, make adjustments to group membership.
                        That looks essentially like the Copy User option from ADUC, but in PS, and it makes folders and such too.
                        I wonder though, are users able to answer these questions about themselves?

                        Unfortunately not because the user running the script has to be a domain admin in order to create the new user, add to groups create mailboxes, etc.

                        NerdyDadN 1 Reply Last reply Reply Quote 2
                        • NerdyDadN
                          NerdyDad
                          last edited by

                          Full disclosure: It can create folders within network shares. I had to go through the drive (ex c$) in order to create the proper folder. However, I have not yet been able to add permissions to the folders via the script. I've always had to go back and add permissions later on. There is an NTFS add-on module that a third-party individual has written and put out there, but I was never able to get it to working properly.

                          black3dynamiteB GreyG 2 Replies Last reply Reply Quote 0
                          • NerdyDadN
                            NerdyDad @NerdyDad
                            last edited by

                            @NerdyDad said in Creating users:

                            @momurda said in Creating users:

                            I have 2 users starting next week, might have to use your script @NerdyDad
                            I usually just use the Copy User function in ADUC then fill out the name, make adjustments to group membership.
                            That looks essentially like the Copy User option from ADUC, but in PS, and it makes folders and such too.
                            I wonder though, are users able to answer these questions about themselves?

                            Unfortunately not because the user running the script has to be a domain admin in order to create the new user, add to groups create mailboxes, etc.

                            But after thinking about it, would you really want users creating user accounts? What if that user was let go and had created themselves a rouge account that you didn't know about? We still need to be holding the keys to the kingdom, assuming that the kingdom is still safe of course.

                            GreyG 1 Reply Last reply Reply Quote 1
                            • black3dynamiteB
                              black3dynamite @NerdyDad
                              last edited by black3dynamite

                              @NerdyDad
                              What about using icacls command to manage permissions and ownership?

                              NerdyDadN 1 Reply Last reply Reply Quote 0
                              • NerdyDadN
                                NerdyDad @black3dynamite
                                last edited by

                                @black3dynamite said in Creating users:

                                @NerdyDad
                                What about using icacls command to manage permissions and ownership?

                                Didn't know that existed. I will experiment with that and see if I can improve the scripts soon (not sure when, but soon...hopefully).

                                1 Reply Last reply Reply Quote 0
                                • GreyG
                                  Grey @NerdyDad
                                  last edited by

                                  @NerdyDad said in Creating users:

                                  Full disclosure: It can create folders within network shares. I had to go through the drive (ex c$) in order to create the proper folder. However, I have not yet been able to add permissions to the folders via the script. I've always had to go back and add permissions later on. There is an NTFS add-on module that a third-party individual has written and put out there, but I was never able to get it to working properly.

                                  I've used this to fix full directories of user home folders. Maybe you can cut out the parts you need for this user creation script?

                                  #
# !! This ONLY works in PowerShell v2. !!
#
#            Variables
#
# Where is the root of the home drives?
$homeDrivesDir="\\domain.com\userdir$"
# Report only? ($false = fix problems - aka dangerous mode)
$reportMode = $false
# Print all valid directories?
$verbose = $false
# What domain are your users in?
$domainName = "domain.com"
#
# #############################################
 
# Save the current working directory before we change it (purely for convenience)
pushd .
# Change to the location of the home drives
set-location $homeDrivesDir
 
# Warn the user if we will be fixing or just reporting on problems
write-host ""
 
if ($reportMode) {
 Write-Host "Report mode is on. Not fixing problems!"
} else {
 Write-Host "Report mode is off. Will fix problems!"
}
 
write-host ""
 
# Initialise a few counter variables. Only useful for multiple executions from the same session
$goodPermissions = $unfixablePermissions = $fixedPermissions = $badPermissions = 0
$failedFolders = @()
 
# For every folder in the $homeDrivesDir folder
foreach($homeFolder in (Get-ChildItem $homeDrivesDir | Where {$_.psIsContainer -eq $true})) {
 
 # dump the current ACL in a variable
 $Acl = Get-Acl $homeFolder
 
 # create a permission mask in the form of DOMAIN\Username where Username=foldername
 #    (adjust as necessary if your home folders are not exactly your usernames)
 $compareString = "*" + $domainName + "\" + $homeFolder.Name + " Allow  FullControl*"
 
 # if the permission mask is in the ACL
 if ($Acl.AccessToString -like $compareString) {
 
 # everything's good, increment the counter and move on.
 if ($verbose) {Write-Host "Permissions are valid for" $homeFolder.Name -backgroundcolor green -foregroundcolor white}
 $goodPermissions += 1
 
 } else {
 # Permissions are invalid, either fix or report
 # increment the number of permissions needing repair
 $badPermissions += 1
 # if we're in report mode
 if ($reportMode -eq $true) {
 # reportmode is on, don't do anything
 Write-Host "Permissions not valid for" $homeFolder.Name -backgroundcolor red -foregroundcolor white
 } else {
 # reportmode is off, fix the permissions
 Write-Host "Setting permissions for" $homeFolder.Name -foregroundcolor white -backgroundcolor red
 # Add the user in format DOMAIN\Username
 $username = $domainName + "\" + $homeFolder.Name
 # Grant the user full control
 $accessLevel = "FullControl"
 # Should permissions be inherited from above?
 $inheritanceFlags = "ContainerInherit, ObjectInherit"
 # Should permissions propagate to below?
 $propagationFlags = "None"
 # Is this an Allow/Deny entry?
 $accessControlType = "Allow"
 try {
 # Create the Access Rule
 $accessRule = New-Object System.Security.AccessControl.FileSystemAccessRule($username,$accessLevel,$inheritanceFlags,$propagationFlags,$accessControlType)
 
 # Attempt to apply the access rule to the ACL
 $Acl.SetAccessRule($accessRule)
 Set-Acl $homeFolder $Acl
 # vvvvvvv Possible PS v3+ fix vvvvvvvvv
 # Set-Acl --path $homeFolder -AclObject $Acl
 # ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 # if it hasn't errored out by now, increment the counter
 $fixedPermissions += 1
 } catch {
 # It failed!
 # Increment the fail count
 $unfixablePermissions += 1
 # and add the folder to the list of failed folders
 $failedFolders += $homeFolder
 }
 } #/if
 } #/if
} #/foreach
 
# Print out a summary
 
Write-Host ""
Write-Host $goodPermissions "valid permissions"
Write-Host $badPermissions "permissions needing repair"
if ($reportMode -eq $false) {Write-Host $fixedPermissions "permissions fixed"}
if ($unfixablePermissions -gt 0) {
 Write-Host $unfixablePermissions "ACLs could not be repaired."
 foreach ($folder in $failedFolders) {Write-Host " -" $folder}
}
 
# Cleanup
popd
                                  NerdyDadN 1 Reply Last reply Reply Quote 1
                                  • GreyG
                                    Grey @NerdyDad
                                    last edited by

                                    @NerdyDad said in Creating users:

                                    @NerdyDad said in Creating users:

                                    @momurda said in Creating users:

                                    I have 2 users starting next week, might have to use your script @NerdyDad
                                    I usually just use the Copy User function in ADUC then fill out the name, make adjustments to group membership.
                                    That looks essentially like the Copy User option from ADUC, but in PS, and it makes folders and such too.
                                    I wonder though, are users able to answer these questions about themselves?

                                    Unfortunately not because the user running the script has to be a domain admin in order to create the new user, add to groups create mailboxes, etc.

                                    But after thinking about it, would you really want users creating user accounts? What if that user was let go and had created themselves a rouge account that you didn't know about? We still need to be holding the keys to the kingdom, assuming that the kingdom is still safe of course.

                                    http://spudlink.net/gallery/var/albums/Friendship-is-Dragons/RarityRogueMotivator.jpg

                                    1 Reply Last reply Reply Quote 0
                                    • NerdyDadN
                                      NerdyDad @Grey
                                      last edited by

                                      @Grey said in Creating users:

                                      @NerdyDad said in Creating users:

                                      Full disclosure: It can create folders within network shares. I had to go through the drive (ex c$) in order to create the proper folder. However, I have not yet been able to add permissions to the folders via the script. I've always had to go back and add permissions later on. There is an NTFS add-on module that a third-party individual has written and put out there, but I was never able to get it to working properly.

                                      I've used this to fix full directories of user home folders. Maybe you can cut out the parts you need for this user creation script?

                                      #
# !! This ONLY works in PowerShell v2. !!
#
#            Variables
#
# Where is the root of the home drives?
$homeDrivesDir="\\domain.com\userdir$"
# Report only? ($false = fix problems - aka dangerous mode)
$reportMode = $false
# Print all valid directories?
$verbose = $false
# What domain are your users in?
$domainName = "domain.com"
#
# #############################################
 
# Save the current working directory before we change it (purely for convenience)
pushd .
# Change to the location of the home drives
set-location $homeDrivesDir
 
# Warn the user if we will be fixing or just reporting on problems
write-host ""
 
if ($reportMode) {
 Write-Host "Report mode is on. Not fixing problems!"
} else {
 Write-Host "Report mode is off. Will fix problems!"
}
 
write-host ""
 
# Initialise a few counter variables. Only useful for multiple executions from the same session
$goodPermissions = $unfixablePermissions = $fixedPermissions = $badPermissions = 0
$failedFolders = @()
 
# For every folder in the $homeDrivesDir folder
foreach($homeFolder in (Get-ChildItem $homeDrivesDir | Where {$_.psIsContainer -eq $true})) {
 
 # dump the current ACL in a variable
 $Acl = Get-Acl $homeFolder
 
 # create a permission mask in the form of DOMAIN\Username where Username=foldername
 #    (adjust as necessary if your home folders are not exactly your usernames)
 $compareString = "*" + $domainName + "\" + $homeFolder.Name + " Allow  FullControl*"
 
 # if the permission mask is in the ACL
 if ($Acl.AccessToString -like $compareString) {
 
 # everything's good, increment the counter and move on.
 if ($verbose) {Write-Host "Permissions are valid for" $homeFolder.Name -backgroundcolor green -foregroundcolor white}
 $goodPermissions += 1
 
 } else {
 # Permissions are invalid, either fix or report
 # increment the number of permissions needing repair
 $badPermissions += 1
 # if we're in report mode
 if ($reportMode -eq $true) {
 # reportmode is on, don't do anything
 Write-Host "Permissions not valid for" $homeFolder.Name -backgroundcolor red -foregroundcolor white
 } else {
 # reportmode is off, fix the permissions
 Write-Host "Setting permissions for" $homeFolder.Name -foregroundcolor white -backgroundcolor red
 # Add the user in format DOMAIN\Username
 $username = $domainName + "\" + $homeFolder.Name
 # Grant the user full control
 $accessLevel = "FullControl"
 # Should permissions be inherited from above?
 $inheritanceFlags = "ContainerInherit, ObjectInherit"
 # Should permissions propagate to below?
 $propagationFlags = "None"
 # Is this an Allow/Deny entry?
 $accessControlType = "Allow"
 try {
 # Create the Access Rule
 $accessRule = New-Object System.Security.AccessControl.FileSystemAccessRule($username,$accessLevel,$inheritanceFlags,$propagationFlags,$accessControlType)
 
 # Attempt to apply the access rule to the ACL
 $Acl.SetAccessRule($accessRule)
 Set-Acl $homeFolder $Acl
 # vvvvvvv Possible PS v3+ fix vvvvvvvvv
 # Set-Acl --path $homeFolder -AclObject $Acl
 # ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 # if it hasn't errored out by now, increment the counter
 $fixedPermissions += 1
 } catch {
 # It failed!
 # Increment the fail count
 $unfixablePermissions += 1
 # and add the folder to the list of failed folders
 $failedFolders += $homeFolder
 }
 } #/if
 } #/if
} #/foreach
 
# Print out a summary
 
Write-Host ""
Write-Host $goodPermissions "valid permissions"
Write-Host $badPermissions "permissions needing repair"
if ($reportMode -eq $false) {Write-Host $fixedPermissions "permissions fixed"}
if ($unfixablePermissions -gt 0) {
 Write-Host $unfixablePermissions "ACLs could not be repaired."
 foreach ($folder in $failedFolders) {Write-Host " -" $folder}
}
 
# Cleanup
popd

                                      I'm going have to play with that one next week. Thanks. 🙂

                                      1 Reply Last reply Reply Quote 0
                                      • ObsolesceO
                                        Obsolesce @NerdyDad
                                        last edited by Obsolesce

                                        @NerdyDad said in Creating users:

                                        Try this out. It pops up with a command prompt to ask you a few questions to get started. Once the questions are answered, it takes care of most everything else. When it is done, it should spit out a piece of paper for you to give to the new employee with the information that they need.

                                        I sterilized it so that you could use it in your company.

                                        #Imports the AD & NTFS Modules (Module 1.02)
Import-Module activedirectory
Import-Module MSOnline

#Sets Variables (Module 1.03)
$fn #First Name
$ln #Last Name
$title
$dep #Department
$loc #Location
$man #Manager
$un #Username
$officePhone
$streetAdd
$city
$ZIP
$fi #First Name Initial, will be used to figure out Username

#Getting information (Module 1.04)
Write-Host "I need some information from you first. Answer the following questions to get started."
$fn = read-host "First Name?"
$ln = Read-Host "Last Name?"
$title = Read-Host "Title?"
$dep = Read-Host "Department?"
$man = Read-Host "Manager (Username)?"
$loc = Read-Host "<location>?"

#Finding out the Username (Module 1.05)
$fi = $fn.Substring(0,1)
$un = -join ($ln, $fi)

#Sets Location information (Module 1.06)
if ($loc -eq "Loc1") { #If the user is in Loc1 (Module 1.07)
    $officePhone = "(999) 999-9999";
    $streetAdd = "123 Anywhere Drive";
    $city = "YourTown";
    $ZIP = "12345";
}
Else { #If the user is in Loc2 (Module 1.08)
    $officePhone = "(987) 654-3210";
    $streetAdd = "987 Nothere Blvd";
    $city = "Somewhere Else";
    $ZIP = "98765";
}

#Sets Password (Module 1.09)
$passwd = (Read-Host -AsSecureString "Account Password")
$password = ConvertFrom-SecureString -SecureString $passwd

$userParams = @{ #(Module 1.10)
	'Name' = $un;
	'Enabled' = $true;
	'AccountPassword' = $passwd; 
	'UserPrincipalName' = -join ($un, "@mycompany.com");
	'SamAccountName' = $un;
	'ChangePasswordAtLogon' = $false;
	'GivenName' = $fn;
	'Surname' = $ln;
	'DisplayName' = -join ($fn, " ", $ln);
	'Description' = $title;
	'OfficePhone' = $officePhone;
	'StreetAddress' =  $streetAdd;
	'City' = $city;
	'State' = "Texas";
	'PostalCode' = $ZIP;
	'Title' = $title;
	'Department' = $dep;
	'Company' = 'MyCompany';
	'Manager' = $man;
}

#Creates the user in AD (Module 1.11)
New-ADUser @userParams

#Wait for the account to be created before doing anything else (Module 1.12)
Start-Sleep -Seconds 10

#Makes the user's network drive, scan folder, and sets the permissions to their folders and files (Module 1.13)
if ($loc -eq "Loc1") { #If the user is in Loc1 (Module 1.14)
New-Item -Name $un -ItemType directory -Path "\\server\folder\" #Creates users network drive
New-Item -Name scans -ItemType directory -Path "\\server\folder\$un\" #Creates users scan folder
}
Else { #If the user is in Loc2 (Module 1.15)
New-Item -Name $un -ItemType directory -Path "\\server\folder\" #Creates users network drive
New-Item -Name scans -ItemType directory -Path "\\server\folder\$un" #Creates users scan folder
}

#Adds the user to the correct Security Group for permissions and other network drives
if ($dep -eq "Accounting"){ #(Module 1.16)
Add-ADGroupMember -Identity 'Accounting' -Members $un #(Module 1.17)
} #Adds the user to the Accounting Group
Elseif ($dep -eq "Customer Service") { #(Module 1.18)
Add-ADGroupMember -Identity 'Customer Service' -Members $un #(Module 1.19)
} #Adds the user to the Customer Service Group
Elseif ($dep -eq "Executives") { #(Module 1.20)
Add-ADGroupMember -Identity 'Executives' -Members $un #(Module 1.21)
} #Adds the user to the Executives Group
Elseif ($dep -eq "HR") { #(Module 1.22)
Add-ADGroupMember -Identity 'Human Resources' -Members $un #(Module 1.23)
} #Adds the user to the Human Resources Group
Elseif ($dep -eq "Human Resources") { #(Module 1.24)
Add-ADGroupMember -Identity 'Human Resources' -Members $un #(Module 1.25)
} #Adds the user to the Human Resources Group
Elseif ($dep -eq "IT") { #(Module 1.26)
Add-ADGroupMember -Identity 'Domain Admins' -Members $un #(Module 1.27)
} #Adds the user to the Domain Admins Group for IT
Elseif ($dep -eq "Maintenance") { #(Module 1.28)
Add-ADGroupMember -Identity 'MaintGroup' -Members $un #(Module 1.29)
} #Adds the user to the Maintenance Group
Elseif ($dep -eq "Production") { #(Module 1.30)
Add-ADGroupMember -Identity 'Production' -Members $un #(Module 1.31)
} #Adds the user to the Production GroupHR
Elseif ($dep -eq "QA") {  #(Module 1.32)
Add-ADGroupMember -Identity 'QA Group' -Members $un #(Module 1.33)
} #Adds the user to the QA Group
Elseif ($dep -eq "Quality Assurance") {  #(Module 1.34)
Add-ADGroupMember -Identity 'QA Group' -Members $un #(Module 1.35)
} #Adds the user to the QA Group
Elseif ($dep -eq "Shipping") {  #(Module 1.36)
Add-ADGroupMember -Identity 'SHIP' -Members $un #(Module 1.37)
} #Adds the user to the Shipping Group
Else { #(Module 1.38)
Add-ADGroupMember -Identity 'Domain Users' -Members $un #(Module 1.39)
} #Dumps the user to the Domain Users Group

$manfn = Get-ADUser $man -Properties Name | select Name #Gets the manager's name (Module 1.40)

#Creates a report of the User's information
$report = "Hello $fn $ln,

From the IT Department, welcome to <MyCompany>.   We 
are here to help you connect to the resources that you need for 
your job.   If you need assistance with technology, please feel 
free to contact us at either the help page, which is set as your 
home page in Internet Explorer, email us at 
helpdesk@<MyCompany>.com, or call us at extension 4357.

Below you will find your information so that you can login to 
the network and get started:

Your username is domain\$un
Your password is 
Your email address is $fn$ln@<MyCompany>.com
Your phone number is $officePhone Ext. 

It is suggested that you change your password to something that 
you can remember but difficult enough that somebody else cannot 
figure out.   The requirement is only 6 characters, but we do 
advise on making it longer, throw some numbers and special 
characters in there as well to make it stronger.   Best advice 
would be to use a pass-PHRASE instead of a pass-WORD.

Your computer should already be setup with your email loaded and 
your network drives.   At <MyCompany>, we use Microsoft 
Outlook as the email client.   Depending on what department you 
are in will depend on what drives you have available.   
Generally, everybody will have an F: drive and a G: drive.   The 
F: drive is your network folder.   Place in there the documents 
that you feel you cannot do your job without.   In the F: drive 
will be a scan folder.   When you go to the Xerox to scan in 
documents, then you will find them in your scan folder.   The G: 
drive is a company-wide shared folder.  As for your department 
drives, it would be best to talk with $($manfn.name), 
your supervisor/manager, about the nature and uses of these drives.

The use of the equipment and resources provided are a privilege 
to you for use and should not be taken advantage of.   There are 
measures set in place that allows us to manage the network.   Do 
not assume that there is any personal privacy on this network.   
The only privacy that you can assume is for the nature of your 
work.   All information (including emails, documents, 
spreadsheets, pictures, etc.) contained on the equipment 
provided and on the network is the sole property of Standard 
Meat Company.

If you have problems with your equipment or network resources, 
please feel free to ask.   We do not mind helping, but we cannot 
help if we do not know, so please ask! 

Sincerely,


Your IT Department"

if ($loc -eq "Loc1") { #(Module 1.43)
Write-Output $report | Out-Printer
}
Else { #(Module 1.44)
Write-Output $report | Out-Printer \\server\'Xerox WorkCentre 4260'
}

#Waiting for AD & Azure to Synchronize, which synchronizes every 30 minutes (Module 1.45)
Write-host "Waiting..."
Start-Sleep -Seconds 1800

#Connect to O365 and licenses the user
Connect-MsolService #(Module 1.46)
Set-MsolUserLicense -UserPrincipalName (-join($un,'@<MyCompany>.com')) -AddLicenses #(Module 1.47)

#Connects to the Exchange box, creates the users email account, then disconnects from the Exchange box
$mail = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://outlook.office365.com/powershell-liveid/ -AllowRedirection -Authentication Basic -Credential $cred #(Module 1.48-Part 1)
Import-PSSession $mail -WarningAction SilentlyContinue | Out-Null #(Module 1.48-Part 2)
enable-Mailbox -Identity $un -Alias $un -DisplayName (-join($fn,$ln)) #Creates the users mailbox (Module 1.49)
IF ($dep -eq "Executives") { #(Module 1.50)
Set-Mailbox (-join($un,'@<MyCompany>.com')) -ProhibitSendQuota 19.5GB -ProhibitSendReceiveQuota 20GB -IssueWarningQuota 19GB #Sets the mailbox size in Exchange Online so that the user isn't using all 50 GB of storage (Module 1.51)
} #If they are an executive, then they get 20 GB of mailbox space
elseif ($dep -eq "IT") { #(Module 1.52)
Set-Mailbox (-join($un,'@<MyCompany>.com')) #(Module 1.53)
} #IT gets the full mailbox, of course 
else { #(Module 1.54)
Set-Mailbox (-join($un,'@<MyCompany>.com')) -ProhibitSendQuota 9.5GB -ProhibitSendReceiveQuota 10GB -IssueWarningQuota 9GB #Sets the mailbox size in Exchange Online so that the user isn't using all 50 GB of storage (Module 1.55)
} #Otherwise, everybody else gets 10 GB of mailbox space
Remove-PSSession -Session $mail #Disconnects from the Exchange box (Module 1.56)

                                        This is a great script, especially if you have users frequently cycling in and out of the company. Also a good base to expand from, or customize to make it fit many environments.

                                        Something that stuck out in the script for me was that the homeDirectory AD attribute wasn't being used (unless I missed it). When you set that, AD automatically does permissions appropriately for the users home drive or home directory. It works well with DFS or DFSR.

                                        Edit: I use the following format for "homeDirectory": \\DOMAIN\Namespace\HomeDrives\%username%
                                        Path can be whatever works, above is just what happens to be for that case.

                                        1 Reply Last reply Reply Quote 2
                                        • 1
                                        • 2
                                        • 2 / 2
                                        • First post
                                          Last post