Server will not shut down
-
@scottalanmiller said in Server will not shut down:
Given the setup, my inkling is that you have an issue with the iSCSI Initiator. The Microsoft iSCSI Initiator is known to be flaky and can easily be causing an issue. Both architecturally and practically due to the use of Windows it is standard practice to present SAN storage as a local drive via VMware to the VM rather than inside of the VM. VMware's handling of iSCSI is much more robust than Windows is, and you need only one connection per physical host rather than one per VM.
I've set up shared storage with VMware before, and IIRC, isn't there a limit on the size of the disk image that you can set up? Our VMware disk images would be ~20 TB each.
-
@dafyre said in Server will not shut down:
I've set up shared storage with VMware before, and IIRC, isn't there a limit on the size of the disk image that you can set up? Our VMware disk images would be ~20 TB each.
62TB
-
@scottalanmiller said in Server will not shut down:
@dafyre said in Server will not shut down:
I've set up shared storage with VMware before, and IIRC, isn't there a limit on the size of the disk image that you can set up? Our VMware disk images would be ~20 TB each.
62TB
Cool. I'll pass that info along and see if he wants to set it up that way.
-
@dafyre said in Server will not shut down:
@scottalanmiller said in Server will not shut down:
@dafyre said in Server will not shut down:
I've set up shared storage with VMware before, and IIRC, isn't there a limit on the size of the disk image that you can set up? Our VMware disk images would be ~20 TB each.
62TB
Cool. I'll pass that info along and see if he wants to set it up that way.
Assuming you are not on some ancient VMware. It's been that big for a while.
I would take a "moment" and make one VM or two that use the "direct to VMware" SAN method and test that and see if it fixes things. It simplifies your setup by quite a bit and would be better for the long term. It's more efficient to the SAN, so might be very good for your performance, too. And avoiding that Windows component is always worth it. Just makes things simpler and more abstracted - leveraging virtualization for what it is built for.
-
It might not be the issue, but it's a place to start.
-
@scottalanmiller said in Server will not shut down:
It might not be the issue, but it's a place to start.
Seems legit, lol.
I've done set ups using the iSCSI initiator before (I have two of them running here now -- Failover Clusters) and never had any problems at all. So something in this setup is the issue.
-
@dafyre said in Server will not shut down:
@scottalanmiller said in Server will not shut down:
It might not be the issue, but it's a place to start.
Seems legit, lol.
I've done set ups using the iSCSI initiator before (I have two of them running here now -- Failover Clusters) and never had any problems at all. So something in this setup is the issue.
It has to work "most of the time" or they couldn't even include it. But like a lot of things in the Windows storage ecosystem (which includes Dynamic Disks, DFS and Software RAID), the iSCSI components are weak and fragile and can cause lots of issues. This is why companies like @StarWind_Software have taken the time to rewrite and replace those components for enterprise use because the built in ones just aren't up to the task. And now that Windows is "always" run as a VM and the standard pattern is using the SAN to the hypervisor, Microsoft has no reason to fix or improve what is included any longer. So now it is stagnating, as well.
I've never tried Windows with iSCSI setup and cloned. I'm wondering if cloning iSCSI is part of the issue.
-
@scottalanmiller said in Server will not shut down:
@dafyre said in Server will not shut down:
@scottalanmiller said in Server will not shut down:
It might not be the issue, but it's a place to start.
Seems legit, lol.
I've done set ups using the iSCSI initiator before (I have two of them running here now -- Failover Clusters) and never had any problems at all. So something in this setup is the issue.
It has to work "most of the time" or they couldn't even include it. But like a lot of things in the Windows storage ecosystem (which includes Dynamic Disks, DFS and Software RAID), the iSCSI components are weak and fragile and can cause lots of issues. This is why companies like @StarWind_Software have taken the time to rewrite and replace those components for enterprise use because the built in ones just aren't up to the task. And now that Windows is "always" run as a VM and the standard pattern is using the SAN to the hypervisor, Microsoft has no reason to fix or improve what is included any longer. So now it is stagnating, as well.
I've never tried Windows with iSCSI setup and cloned. I'm wondering if cloning iSCSI is part of the issue.
I would use it if it worked badly. But it does work, and in my experience, when it works, it works well... Or it works so badly that it's not even usable.
We're actually talking about the iSCSI stuff being in the clone now. We'll see what boss says when we all get back from lunch.
-
@dafyre said in Server will not shut down:
I would use it if it worked badly. But it does work, and in my experience, when it works, it works well... Or it works so badly that it's not even usable.
That could be what's happening here
-
Yeah i was wondering if the cloned ISCSI stuff was the problem as well.
Does each VM get it's own LUN on the SAN?
-
@scottalanmiller said in Server will not shut down:
@dafyre said in Server will not shut down:
I would use it if it worked badly. But it does work, and in my experience, when it works, it works well... Or it works so badly that it's not even usable.
That could be what's happening here
I'd expect nothing less from Microsoft. However, it would seem that our master image works flawlessly... So we'll still blame Microsoft, lol.
-
@dafyre said in Server will not shut down:
@scottalanmiller said in Server will not shut down:
@dafyre said in Server will not shut down:
I would use it if it worked badly. But it does work, and in my experience, when it works, it works well... Or it works so badly that it's not even usable.
That could be what's happening here
I'd expect nothing less from Microsoft. However, it would seem that our master image works flawlessly... So we'll still blame Microsoft, lol.
I would expect the master to work, but i was wondering, did you sysprep the master, then run through the mini config and it's still working?
If yes, I wonder if there is some sort of hardware ID associated with ISCSI that needs to be unique to each machine, and if the master is online, then the clones won't work? just a thought.
-
@Dashrender said in Server will not shut down:
@dafyre said in Server will not shut down:
@scottalanmiller said in Server will not shut down:
@dafyre said in Server will not shut down:
I would use it if it worked badly. But it does work, and in my experience, when it works, it works well... Or it works so badly that it's not even usable.
That could be what's happening here
I'd expect nothing less from Microsoft. However, it would seem that our master image works flawlessly... So we'll still blame Microsoft, lol.
I would expect the master to work, but i was wondering, did you sysprep the master, then run through the mini config and it's still working?
If yes, I wonder if there is some sort of hardware ID associated with ISCSI that needs to be unique to each machine, and if the master is online, then the clones won't work? just a thought.
Yeah. The master has been offline the whole time while we are tinkering. I thought you may be onto something for a minute, but alas, the IQN (initiator name) does change with the system after it has been cloned & sysprepped.
I just tested it... it changes with the hostname if you don't set one yourself.
-
Well, it turns out the fix was much easier than I anticipated. Not 100% certain, but we have at least one VM that is now cooperating with us, whereas before we had none.
It's one of those I feel stupid things... Both NICs are on the same subnet. So all we had to do was manually set the Metric for each interface, and then everything magically started working.
-
@dafyre can you follow up with all of the details
-
@scottalanmiller said in Server will not shut down:
@dafyre said in Server will not shut down:
Got an oddball problem here... We are working on setting up several VM clones for a project here. Each VM will be connected to the same shared storage via iSCSI.
Under the hood, right? Via the datastore, not iSCSI connecting to the OS inside of the VM, right?
Here is the post where I got the idea of what was wrong, but was confirming details as to what the issue was @Dashrender
-
@scottalanmiller said in Server will not shut down:
I've never tried Windows with iSCSI setup and cloned. I'm wondering if cloning iSCSI is part of the issue.
And here is where I suggested the cloning issues two posts before @Dashrender
-
@dafyre said in Server will not shut down:
So now on the cloned systems, they boot up, and run painfully slow. And then when we tell them to reboot, they actually will sit there and never reboot, but they'll be stuck at "Restarting", like it's about to reboot... but it never does.
Anybody have any ideas that I can check?
-
@scottalanmiller said in Server will not shut down:
@scottalanmiller said in Server will not shut down:
I've never tried Windows with iSCSI setup and cloned. I'm wondering if cloning iSCSI is part of the issue.
And here is where I suggested the cloning issues two posts before @Dashrender
-
