who had used webphone in freePBX
-
@IT-ADMIN said:
http://www.ozekiphone.com/voip-how-to-add-a-webphone-to-your-website-with-ozeki-xe-pbx-724.html
like this one : http://www.ozekiphone.com/voip-how-to-add-a-webphone-to-your-website-with-ozeki-xe-pbx-724.html
-
actually i need to know whether freePBX accepte webphone as an outside line or only accept the traditional lines (PSTN, PRI, VOIP trunk)
-
@IT-ADMIN said:
actually i need to know whether freePBX accepte webphone as an outside line or only accept the traditional lines (PSTN, PRI, VOIP trunk)
FreePBX has no limitations. It will treat it however you want.
-
but how??, this is the problem, i think it is difficult and require a solid CLI asterisk background
-
@IT-ADMIN said:
but how??, this is the problem, i think it is difficult and require a solid CLI asterisk background
That could be. FreePBX might not expose that functionality.
-
And you'll need to expose your PBX to the internet to make this work.
-
@Dashrender said:
And you'll need to expose your PBX to the internet to make this work.
Yes, for sure.
-
@IT-ADMIN said:
@IT-ADMIN said:
http://www.ozekiphone.com/voip-how-to-add-a-webphone-to-your-website-with-ozeki-xe-pbx-724.html
like this one : http://www.ozekiphone.com/voip-how-to-add-a-webphone-to-your-website-with-ozeki-xe-pbx-724.html
I don't see a web phone available there. Can you use their web phone product without their PBX?
-
@Dashrender said:
And you'll need to expose your PBX to the internet to make this work.
not necessarily, a port forward will do the job without exposing you PBX with a public ip
-
@scottalanmiller said:
@IT-ADMIN said:
@IT-ADMIN said:
http://www.ozekiphone.com/voip-how-to-add-a-webphone-to-your-website-with-ozeki-xe-pbx-724.html
like this one : http://www.ozekiphone.com/voip-how-to-add-a-webphone-to-your-website-with-ozeki-xe-pbx-724.html
I don't see a web phone available there. Can you use their web phone product without their PBX?
That's probably the problem the OP is running into. Can't seem to make it work directly - which it's probably not meant to.
-
@scottalanmiller said:
@IT-ADMIN said:
@IT-ADMIN said:
http://www.ozekiphone.com/voip-how-to-add-a-webphone-to-your-website-with-ozeki-xe-pbx-724.html
like this one : http://www.ozekiphone.com/voip-how-to-add-a-webphone-to-your-website-with-ozeki-xe-pbx-724.html
I don't see a web phone available there. Can you use their web phone product without their PBX?
as far as i'm concerned you cannot,
but really it a very very good feature that allows you to increase your incoming phone calls and bring new costumers -
@IT-ADMIN said:
@Dashrender said:
And you'll need to expose your PBX to the internet to make this work.
not necessarily, a port forward will do the job without exposing you PBX with a public ip
Still exposed, but not fully. Better than nothing.
-
@IT-ADMIN said:
@scottalanmiller said:
@IT-ADMIN said:
@IT-ADMIN said:
http://www.ozekiphone.com/voip-how-to-add-a-webphone-to-your-website-with-ozeki-xe-pbx-724.html
like this one : http://www.ozekiphone.com/voip-how-to-add-a-webphone-to-your-website-with-ozeki-xe-pbx-724.html
I don't see a web phone available there. Can you use their web phone product without their PBX?
as far as i'm concerned you cannot,
but really it a very very good feature that allows you to increase your incoming phone calls and bring new costumersIt's a great feature. But it is separate from the PBX code. You just have to go find a web phone that you like and use that. No reason to have it connected with the PBX itself.
-
@scottalanmiller said:
@IT-ADMIN said:
@Dashrender said:
And you'll need to expose your PBX to the internet to make this work.
not necessarily, a port forward will do the job without exposing you PBX with a public ip
Still exposed, but not fully. Better than nothing.
I'm not sure how this is different? OK it's a bit different, and it's exactly how I would expect nearly anyone to set it up, only opening the required ports to the outside.
-
i think if you use a simple webphone (without being associated with any PBX) you will not be able to route the call to a hard phone, it will be kind of a skype call which is not practical in our business at all, the agent must answers calls with a hard phone
-
@Dashrender said:
@scottalanmiller said:
@IT-ADMIN said:
@Dashrender said:
And you'll need to expose your PBX to the internet to make this work.
not necessarily, a port forward will do the job without exposing you PBX with a public ip
Still exposed, but not fully. Better than nothing.
I'm not sure how this is different? OK it's a bit different, and it's exactly how I would expect nearly anyone to set it up, only opening the required ports to the outside.
yes but there is a difference between giving your PBX a public ip or put it in the DMZ and port forward
-
Skype can be answered with a traditional phone, at least consumer based ones. I'd be surprised if there wasn't a module for some PBX (maybe not FreePBX) to accept Skype calls.
-
port forward is more secure than exposing your entire PBX to the cloud
-
@IT-ADMIN said:
@Dashrender said:
@scottalanmiller said:
@IT-ADMIN said:
@Dashrender said:
And you'll need to expose your PBX to the internet to make this work.
not necessarily, a port forward will do the job without exposing you PBX with a public ip
Still exposed, but not fully. Better than nothing.
I'm not sure how this is different? OK it's a bit different, and it's exactly how I would expect nearly anyone to set it up, only opening the required ports to the outside.
yes but there is a difference between giving your PBX a public ip or put it in the DMZ and port forward
Sure, but I also didn't say to give it a public IP, I said that you'd need to expose it to the internet - which you do through a DMZ NAT Port setup as well as by giving a public IP.
-
@Dashrender said:
Sure, but I also didn't say to give it a public IP, I said that you'd need to expose it to the internet - which you do through a DMZ NAT Port setup as well as by giving a public IP.
sure i understand what you mean, i just get scared by the term exposing lol, i prefer using the term port forward for security reason
