Anyone have the Yealink W5xP line

[JaredBusch]

What is the functional difference between the 52 and 56?

Also how easy is it to transfer and such? Can you set BLF at all?

[coliver]

I deployed a few W52P's at my last job. They worked fairly well but I didn't do very much advanced configs with them. I know that the users, who weren't very technical, we able to easily transfer calls.

It looks like the big difference between the two models is an updated screen.

[AdamF]

@JaredBusch

I've deployed about 5-6 of these units. Some with multiple handsets (up to 3) They do relatively well in open areas. Going through concrete walls is terrible as expected, but they do offer repeaters as well.

The only problem I am having recently is with one unit losing connection, as we are discussing in the other thread. Other than that, my experience has been that "they just work" once configured properly. I want to test out the new 56P model though. I also want to test out the new Grandstream DECT line as well. (the 750/720 I believe) They are newer, so I'll probably wait a couple firmware releases first.

What have you been putting in clients in the past for cordless?

[JaredBusch]

@fuznutz04 said in Anyone have the Yealink W5xP line:

@JaredBusch

I've deployed about 5-6 of these units. Some with multiple handsets (up to 3) They do relatively well in open areas. Going through concrete walls is terrible as expected, but they do offer repeaters as well.

The only problem I am having recently is with one unit losing connection, as we are discussing in the other thread. Other than that, my experience has been that "they just work" once configured properly. I want to test out the new 56P model though. I also want to test out the new Grandstream DECT line as well. (the 750/720 I believe) They are newer, so I'll probably wait a couple firmware releases first.

What have you been putting in clients in the past for cordless?

This is the first time any have asked for cordless, and then actually followed through with wanting to purchase.

Can you setup a BLF or speed dial on these? This client uses direct parking and on a desk phone I use a BLF to the appropriate EXT to park and pick up a parked call.

[AdamF]

@JaredBusch

Speed dial yes, and blf, I'm not sure. Never had the need. I'll get some screen shots tomorrow of the interface and post them here

[art_of_shred]

We have a 52 in the office here and we've deployed a few at client locations. They do work well, although initial setup isn't entirely intuitive. We barely use ours, but have not had any issues. I also can't speak about BLF.

[JaredBusch]

@art_of_shred said in Anyone have the Yealink W5xP line:

We have a 52 in the office here and we've deployed a few at client locations. They do work well, although initial setup isn't entirely intuitive. We barely use ours, but have not had any issues. I also can't speak about BLF.

Well log into the GUI and see what is says for DSS keys.

[art_of_shred]

@JaredBusch said in Anyone have the Yealink W5xP line:

@art_of_shred said in Anyone have the Yealink W5xP line:

We have a 52 in the office here and we've deployed a few at client locations. They do work well, although initial setup isn't entirely intuitive. We barely use ours, but have not had any issues. I also can't speak about BLF.

Well log into the GUI and see what is says for DSS keys.

Any idea where I would see that? I can't find anything related to DSS keys.

[JaredBusch]

@art_of_shred said in Anyone have the Yealink W5xP line:

@JaredBusch said in Anyone have the Yealink W5xP line:

@art_of_shred said in Anyone have the Yealink W5xP line:

We have a 52 in the office here and we've deployed a few at client locations. They do work well, although initial setup isn't entirely intuitive. We barely use ours, but have not had any issues. I also can't speak about BLF.

Well log into the GUI and see what is says for DSS keys.

Any idea where I would see that? I can't find anything related to DSS keys.

That would be an answer itself.

[JaredBusch]

Normally it is a main tab.

[art_of_shred]

@JaredBusch said in Anyone have the Yealink W5xP line:

@art_of_shred said in Anyone have the Yealink W5xP line:

@JaredBusch said in Anyone have the Yealink W5xP line:

@art_of_shred said in Anyone have the Yealink W5xP line:

We have a 52 in the office here and we've deployed a few at client locations. They do work well, although initial setup isn't entirely intuitive. We barely use ours, but have not had any issues. I also can't speak about BLF.

Well log into the GUI and see what is says for DSS keys.

Any idea where I would see that? I can't find anything related to DSS keys.

That would be an answer itself.

Found this: says it applies to the W52P units.

http://support.yealink.com/faq/faqInfo?id=242

[JaredBusch]

@art_of_shred said in Anyone have the Yealink W5xP line:

@JaredBusch said in Anyone have the Yealink W5xP line:

@art_of_shred said in Anyone have the Yealink W5xP line:

@JaredBusch said in Anyone have the Yealink W5xP line:

@art_of_shred said in Anyone have the Yealink W5xP line:

We have a 52 in the office here and we've deployed a few at client locations. They do work well, although initial setup isn't entirely intuitive. We barely use ours, but have not had any issues. I also can't speak about BLF.

Well log into the GUI and see what is says for DSS keys.

Any idea where I would see that? I can't find anything related to DSS keys.

That would be an answer itself.

Found this: says it applies to the W52P units.

http://support.yealink.com/faq/faqInfo?id=242

Right and the setting is listed but no idea how that applies to a key..

transfer.dsskey_deal_type =

When a DSS key is set to a BLF as in my picture above, and that setting is set to 2 (defualt BTW) everything works wonderfully on a T4X series phone.

[JaredBusch]

equivalent GUI settings.