Final Call ... XenServer Boot Media
-
@BRRABill said in Final Call ... XenServer Boot Media:
So, you are telling me on your desktop, the clock is UTC? Do you use UTC in your daily life?
Yes, I sometimes even set my desktop to it and I have it on my watch. UTC is by far the most useful timezone and saves a lot of headaches.
-
@BRRABill said in Final Call ... XenServer Boot Media:
Again, if we want to play a semantics game of ... hey all the
LinuxIT gurus in the world use UTC, and if you don't, well you just don't know what you are doing, then fine, it was a searching error, and all mine. I'm not saying that isn't true.FTFY
-
@BRRABill said in Final Call ... XenServer Boot Media:
But if I buy an alarm clock, I expect it to be in regular time, just like every other clock ever. Unless it is a special clock that clearly states UTC on the box.
I don't even understand this statement. UTC is regular time as much as anything else.
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
Is everything going? We can be confident of that?
Yes, there is literally zero reason for the concern to have arisen. It's a false worry based on nothing, then weird doubt of injecting a weird "if we send all logs somewhere, how can we be sure it is ALL logs." Um... you sent them ALL, period. If you think that the most used syslog software in the world randomly doesn't send logs of its own accord just to trick you, you are either into a realm of not trusting the platform whatsoever and this discussion is moot, or you are going crazy and need a tinfoil hat.
What would make you even ask this question?
what made me think of a question like that was the break out of all of the log information in the config file. But the . at the end does kind of imply that all things would go to the listed place.
-
@BRRABill said in Final Call ... XenServer Boot Media:
If you are trying to tell me that this ONE system that is set up like this is the norm, and all the others are incorrect or just plain dumb, well, then, fine.
General good practice (rule of thumb, NOT best practice) is to "always" use UTC for all service based systems (servers and similar devices.) End users set time for the user, not the system, so this does not normally apply to end users. But we've always set all servers to UTC since the late 1990s. It protects against time bugs from the 1990s, it makes logs way clearer, it keeps people like @Minion-Queen from causing time problems from getting confused on time zones, it lets teams in different regions work together seamlessly. Yes, UTC on everything for IT.
-
@Dashrender said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
Is everything going? We can be confident of that?
Yes, there is literally zero reason for the concern to have arisen. It's a false worry based on nothing, then weird doubt of injecting a weird "if we send all logs somewhere, how can we be sure it is ALL logs." Um... you sent them ALL, period. If you think that the most used syslog software in the world randomly doesn't send logs of its own accord just to trick you, you are either into a realm of not trusting the platform whatsoever and this discussion is moot, or you are going crazy and need a tinfoil hat.
What would make you even ask this question?
what made me think of a question like that was the break out of all of the log information in the config file. But the . at the end does kind of imply that all things would go to the listed place.
But we stopped breaking out.
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@DustinB3403 is still on XS 6.5, and he saw the same issues I did. When you comment out the local logging, XS just re-writes the file.
It does? It rewrites the xenserver.conf file?
Well, in 6.5 it is located at /etc/syslog.conf.
If you make changes to it, it gets re-written on service restart.
At least that is what I saw. And also what happened to @DustinB3403. And also people in the comments left that it had happened to them. (You could make it read only which stopped this.)
-
@BRRABill said in Final Call ... XenServer Boot Media:
Every system I have ever used always adjusts to local time. Even XS asks you that. All the Linux distros do as well.
No, every system adjusts to local time if you tell it to. Every system uses UTC too, if you tell it to.
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
But if I buy an alarm clock, I expect it to be in regular time, just like every other clock ever. Unless it is a special clock that clearly states UTC on the box.
I don't even understand this statement. UTC is regular time as much as anything else.
I think he meant local time, not regular time.
-
@BRRABill said in Final Call ... XenServer Boot Media:
Well, in 6.5 it is located at /etc/syslog.conf.
You sure? That goes against what we had determined.
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
If you are trying to tell me that this ONE system that is set up like this is the norm, and all the others are incorrect or just plain dumb, well, then, fine.
General good practice (rule of thumb, NOT best practice) is to "always" use UTC for all service based systems (servers and similar devices.) End users set time for the user, not the system, so this does not normally apply to end users. But we've always set all servers to UTC since the late 1990s. It protects against time bugs from the 1990s, it makes logs way clearer, it keeps people like @Minion-Queen from causing time problems from getting confused on time zones, it lets teams in different regions work together seamlessly. Yes, UTC on everything for IT.
Huh, first time I've ever heard this - even being in SW for better than 5 years.
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
Well, in 6.5 it is located at /etc/syslog.conf.
You sure? That goes against what we had determined.
Determined where? All we determined was that the article was from 6.2 and in 7 they changed everything.
-
@BRRABill said in Final Call ... XenServer Boot Media:
It does? It rewrites the xenserver.conf file?
If you make changes to it, it gets re-written on service restart.
At least that is what I saw. And also what happened to @DustinB3403. And also people in the comments left that it had happened to them. (You could make it read only which stopped this.)
It should be what you saw since the documentation that you provided in that link stated that exactly this would happen on 6.5 if you used that file instead of the correct one.
Those people in the comments were just pointing out that you were using the wrong file (and they were too) and for some reason they suggested making it read only instead of suggesting editing the right file.
-
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
Well, in 6.5 it is located at /etc/syslog.conf.
You sure? That goes against what we had determined.
Determined where? All we determined was that the article was from 6.2 and in 7 they changed everything.
No, we determined that it was 6.2 and that all evidence said that the change was in 6.5. We know 100% that things had changed by 7, and there is zero reason to not think that it changed in 6.5 and everything in that thread showed that it had indeed changed in 6.5.
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
Well, in 6.5 it is located at /etc/syslog.conf.
You sure? That goes against what we had determined.
chuckle - well, here are more semantics. that is the location that the system reads, but as shown above, XS has a script that changes that file upon startup, so the real place you need to edit is the location listed previously.
-
Think of it this way....
We know that in 1860 there were no computers. We know for sure, because we saw them, that there were computers in 1990. We have obvious reports of computers being sighted in 1975.
That we know computers existed in 1990 in no way suggests that that is when they first appeared, only that that is the first time we confirmed them personally. But it is likely that they didn't just appear right as we looked. That we have the obvious evidence of them being there in 1975 tells us with reasonable certainty that in 1975 they existed already
-
@Dashrender said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
Well, in 6.5 it is located at /etc/syslog.conf.
You sure? That goes against what we had determined.
chuckle - well, here are more semantics. that is the location that the system reads, but as shown above, XS has a script that changes that file upon startup, so the real place you need to edit is the location listed previously.
Correct, it is not the place where the configuration of the system is stored or made, it is where it is temporarily placed while running, it's a scratch file.
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
Well, in 6.5 it is located at /etc/syslog.conf.
You sure? That goes against what we had determined.
Determined where? All we determined was that the article was from 6.2 and in 7 they changed everything.
No, we determined that it was 6.2 and that all evidence said that the change was in 6.5. We know 100% that things had changed by 7, and there is zero reason to not think that it changed in 6.5 and everything in that thread showed that it had indeed changed in 6.5.
Right - it's like the GPO example given above. XS has a script (like GPO) that it runs that edits /etc/syslog.conf so editing /etc/syslog.conf directly is pointless, like editing a windows machine registry is pointless because they will be over written by the script/GPO
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
It does? It rewrites the xenserver.conf file?
If you make changes to it, it gets re-written on service restart.
At least that is what I saw. And also what happened to @DustinB3403. And also people in the comments left that it had happened to them. (You could make it read only which stopped this.)
It should be what you saw since the documentation that you provided in that link stated that exactly this would happen on 6.5 if you used that file instead of the correct one.
Those people in the comments were just pointing out that you were using the wrong file (and they were too) and for some reason they suggested making it read only instead of suggesting editing the right file.
I didn't pick that up from the comments.
In fact, now that I went back and re-read them, I think this is actually FOR 6.5 Because the poster in the comments said he was on 6.2, and the blog author says: "Thanks for the comment and pardon the delay! I needed to check on some things between XenServer 6.2 and 6.5 to answer your question."
-
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
It does? It rewrites the xenserver.conf file?
If you make changes to it, it gets re-written on service restart.
At least that is what I saw. And also what happened to @DustinB3403. And also people in the comments left that it had happened to them. (You could make it read only which stopped this.)
It should be what you saw since the documentation that you provided in that link stated that exactly this would happen on 6.5 if you used that file instead of the correct one.
Those people in the comments were just pointing out that you were using the wrong file (and they were too) and for some reason they suggested making it read only instead of suggesting editing the right file.
I didn't pick that up from the comments.
In fact, now that I went back and re-read them, I think this is actually FOR 6.5 Because the poster in the comments said he was on 6.2, and the blog author says: "Thanks for the comment and pardon the delay! I needed to check on some things between XenServer 6.2 and 6.5 to answer your question."
I thought that the commenter was on 6.5. When I read it, I read it as the author was on 6.2 and the commenter was on 6.5.
