Home Network Firewall Options
-
@JaredBusch I do understand that. I needed an AP and the regular version was out of stock in several places that I could get it from quickly enough.
I will also add that it isn't just the LR that I have seen reports/complaints of my issue. It was the other models, as well.
-
Receiving my Ubiquiti Edgeswitch ES-24-LITE, Open Frame Wall Mounted Rack, Patch Panel, Rack tray and mounted power sure strip. Any good recommendations for UPS solutions for A switch/Fios router/edgerouter?
-
@wirestyle22 said:
Receiving my Ubiquiti Edgeswitch ES-24-LITE, Open Frame Wall Mounted Rack, Patch Panel, Rack tray and mounted power sure strip. Any good recommendations for UPS solutions for A switch/Fios router/edgerouter?
I installed an Eaton 5S 1500 for my desktop - should be more than enough for your power load.
-
@Dashrender said:
@wirestyle22 said:
Receiving my Ubiquiti Edgeswitch ES-24-LITE, Open Frame Wall Mounted Rack, Patch Panel, Rack tray and mounted power sure strip. Any good recommendations for UPS solutions for A switch/Fios router/edgerouter?
I installed an Eaton 5S 1500 for my desktop - should be more than enough for your power load.
Oh, and they are a sponsor.
-
@Dashrender said:
@Dashrender said:
@wirestyle22 said:
Receiving my Ubiquiti Edgeswitch ES-24-LITE, Open Frame Wall Mounted Rack, Patch Panel, Rack tray and mounted power sure strip. Any good recommendations for UPS solutions for A switch/Fios router/edgerouter?
I installed an Eaton 5S 1500 for my desktop - should be more than enough for your power load.
Oh, and they are a sponsor.
Does that do something for me? Legit question.
-
I just put an Eaton 1U unit in one of my remote switch closets. I like it so far.
-
@wirestyle22 said:
@Dashrender said:
@Dashrender said:
@wirestyle22 said:
Receiving my Ubiquiti Edgeswitch ES-24-LITE, Open Frame Wall Mounted Rack, Patch Panel, Rack tray and mounted power sure strip. Any good recommendations for UPS solutions for A switch/Fios router/edgerouter?
I installed an Eaton 5S 1500 for my desktop - should be more than enough for your power load.
Oh, and they are a sponsor.
Does that do something for me? Legit question.
Nope, not that I know of..
but you could mention that you hear about them from ML, telling them that their ML dollars are well spent.. and hopefully they will continue to give ML money, which means ML will continue to stay online..SOooooo in a round about way, yeah, it's doin' somethin' for ya... it's helping to keep this site alive
-
@Dashrender said:
@wirestyle22 said:
@Dashrender said:
@Dashrender said:
@wirestyle22 said:
Receiving my Ubiquiti Edgeswitch ES-24-LITE, Open Frame Wall Mounted Rack, Patch Panel, Rack tray and mounted power sure strip. Any good recommendations for UPS solutions for A switch/Fios router/edgerouter?
I installed an Eaton 5S 1500 for my desktop - should be more than enough for your power load.
Oh, and they are a sponsor.
Does that do something for me? Legit question.
Nope, not that I know of..
but you could mention that you hear about them from ML, telling them that their ML dollars are well spent.. and hopefully they will continue to give ML money, which means ML will continue to stay online..SOooooo in a round about way, yeah, it's doin' somethin' for ya... it's helping to keep this site alive
I will absolutely do that. Thanks!
-
Can't wait to set this up Monday. I'm foaming
-
@brianlittlejohn said:
I just put an Eaton 1U unit in one of my remote switch closets. I like it so far.
Looks pretty sweet.
-
@brianlittlejohn Which one? I am using an Eaton 5P (1500va) 1 U for my wan link equipment. I have the NMS card that is rebooting about once a day. Upgraded the firmware of the card, per tech support and the next thing to try is powering off the UPS and removing the card, replacing it and powering it up.
-
@wrx7m said:
@brianlittlejohn Which one? I am using an Eaton 5P (1500va) 1 U for my wan link equipment. I have the NMS card that is rebooting about once a day. Upgraded the firmware of the card, per tech support and the next thing to try is powering off the UPS and removing the card, replacing it and powering it up.
Im using the 5P750R. Don't have the NMS card in it. It is just powering a POE switch in the closet.
-
@brianlittlejohn Ah. I knew it was a "home" network thread but thought some people would have been blurring the lines with their gear.
-
@wrx7m said:
@brianlittlejohn Ah. I knew it was a "home" network thread but thought some people would have been blurring the lines with their gear.
here and there
-
@wirestyle22 I would put the same thing in at my home... if I didn't live in an apartment and put in a proper cable plant in it.
-
@brianlittlejohn said:
@wirestyle22 I would put the same thing in at my home... if I didn't live in an apartment and put in a proper cable plant in it.
I rent a Town House.
I put a raceway up to the upstairs (I have a loft style place so the bedroom upstairs can look down into the living room). I'm going to essentially mount this to a decently thick piece of black plywood so there will be very few holes--the management company would most likely think I hung pictures or something). I can remove all of this and have the maintenance guys at my job fix any pieces of the wall I need
It pays to be a nice person sometimes.I'll take pictures when I'm completely finished.
-
Switched from Optimum to fios recently and I just attempted to get my ERX setup and It's not playing well. I had both a cable modem and router separately before and it worked perfectly but the fios router isn't playing well with the ERX. Is it possible for me to allow the fios router to be the DHCP server and just use the ERX as a firewall/switch? I didn't see anything in EdgeOS but I'm possibly missing it. Figured I would ask.
-
@wirestyle22 said:
Switched from Optimum to fios recently and I just attempted to get my ERX setup and It's not playing well. I had both a cable modem and router separately before and it worked perfectly but the fios router isn't playing well with the ERX. Is it possible for me to allow the fios router to be the DHCP server and just use the ERX as a firewall/switch? I didn't see anything in EdgeOS but I'm possibly missing it. Figured I would ask.
Sure, but it's only a DHCP to the outside interface of the ERX, not you're whole network. The ERX is a DHCP server to your devices inside your network.
-
@wirestyle22 said:
Switched from Optimum to fios recently and I just attempted to get my ERX setup and It's not playing well. I had both a cable modem and router separately before and it worked perfectly but the fios router isn't playing well with the ERX. Is it possible for me to allow the fios router to be the DHCP server and just use the ERX as a firewall/switch? I didn't see anything in EdgeOS but I'm possibly missing it. Figured I would ask.
Probably a better idea to figure out why the ERX is not cooperating with the FIOS router.
-
@Dashrender said:
@wirestyle22 said:
Switched from Optimum to fios recently and I just attempted to get my ERX setup and It's not playing well. I had both a cable modem and router separately before and it worked perfectly but the fios router isn't playing well with the ERX. Is it possible for me to allow the fios router to be the DHCP server and just use the ERX as a firewall/switch? I didn't see anything in EdgeOS but I'm possibly missing it. Figured I would ask.
Sure, but it's only a DHCP to the outside interface of the ERX, not you're whole network. The ERX is a DHCP server to your devices inside your network.
I'm sure I'm misconfiguring. So you have the external router connected to the ISP only with the ERX having a statically assigned IP and DHCP disabled on the fios router. Then connect everything to the ERX firewall. The gateway of the ERX would be the fios router. This is all correct?
