@scottalanmiller said in Export WordPress Theme:
@LAH3385 said in Export WordPress Theme:
Following for an answer
@LAH3385 said in Export WordPress Theme:
Following for an answer
Gee, thanks. LOL
Working on Wordpress as well. This would come in handy. 
@Mike-Davis said in Hyper-V - 3 VM migrations to new host:
I have 3 VMs to move from one Hyper V host to a new Hyper V host. Has anyone had much luck with live migrations, or should I go straight to export/import?
I thought live migration only works on Failover Cluster environment. If it is not on a SAN or standalone storage, live migration may not work. I ran into issue with Live Migration due to delegation permission. Took me a while to find the cause and fixed it (don't remember what I changed but it was minor change).
Assuming both server have similar storage space, and only 2 nodes we are talking about. Take a look at Starwind's Virtual SAN. They can provide free license for 2 nodes (you have to ask for it). Anatoly Vilchinsky is a real champ. He hooked me up with the license. You should be able to find tutorial on how to set it up.
This will required downtime as it require restarts during installation and setting it up. It's a set and forget kind of deal. Crossover cable between the server highly recommended.
@JaredBusch said in Building functioning OwnCloud within 24 hours... or less...help?:
@scottalanmiller said in Building functioning OwnCloud within 24 hours... or less...help?:
@LAH3385 said in Building functioning OwnCloud within 24 hours... or less...help?:
@travisdh1 said in Building functioning OwnCloud within 24 hours... or less...help?:
Look for the learning Linux series of posts @scottalanmiller did, they're great!
I saw couple Linux series posts from SAM. I tried to follow, but because I do not use it on a daily basis it doesn't rub well on me.
Did you post questions about what was missing or confusing?
In addition to the above.
- Use an SSH client to connect after the bare VM is running, stop using Hyper-V console. You cannot easily copy/paste.
- Follow my guide as linked previously.
- Copy and paste commands, do not retype them.
As I mentioned I am fairly new to these things. I have zero (except basic online java course) experience in programming. You could say I only know enough to get through my day.
Since the past 24 hours I know and understand the purpose of yum and wget through multiple attempts of installing ownCloud. It will works eventually. Also, I do enjoy dirty-ing my hands. I learned a lot, and not going to stop until I got ownCloud working the way I want it...or after completing SAM's linux series.
@scottalanmiller said in Building functioning OwnCloud within 24 hours... or less...help?:
@LAH3385 said in Building functioning OwnCloud within 24 hours... or less...help?:
@travisdh1 said in Building functioning OwnCloud within 24 hours... or less...help?:
Look for the learning Linux series of posts @scottalanmiller did, they're great!
I saw couple Linux series posts from SAM. I tried to follow, but because I do not use it on a daily basis it doesn't rub well on me.
Did you post questions about what was missing or confusing?
No. Just that Linux isn't within my proximity during day job. Learning Linux becomes more of a hobby for me. What was missing? Don't think so. Confusing? A bit due to lack of first hand experience. Like learning German in a country that does not speak German... I guess.
@Mike-Davis said in 2 sponsored facebook ad malware attacks in 2 days:
Unfortunately both sites have users that need to use facebook to do their job. Aside from that, the scammers can just buy ads on any site.
The good side is now I have some fresh content to put in a presentation I'm doing on Tuesday about how not to get scammed.
One thing you may want to add to your presentation is Google's shorten link. I did mine couple of weeks ago regarding a fake google docs using goo.gl instead of docs.google.com. It looks identical to google docs except the link itself (revealed after hover the link).
I would not mind if my BSOD has a phone number to call and explain why it BSODed. 
Maybe disable access to Facebook altogether.
Hmmm... followed every steps but site doesn't load.
Too tired. Will try again tomorrow. Zzzz
@travisdh1 said in Building functioning OwnCloud within 24 hours... or less...help?:
Look for the learning Linux series of posts @scottalanmiller did, they're great!
I saw couple Linux series posts from SAM. I tried to follow, but because I do not use it on a daily basis it doesn't rub well on me.
I
@travisdh1 said in Building functioning OwnCloud within 24 hours... or less...help?:
@LAH3385 said in Building functioning OwnCloud within 24 hours... or less...help?:
error.
@travisdh1 said in Building functioning OwnCloud within 24 hours... or less...help?:
@LAH3385 said in Building functioning OwnCloud within 24 hours... or less...help?:
@JaredBusch said in Building functioning OwnCloud within 24 hours... or less...help?:
@scottalanmiller said in Building functioning OwnCloud within 24 hours... or less...help?:
@JaredBusch said in Building functioning OwnCloud within 24 hours... or less...help?:
@scottalanmiller said in Building functioning OwnCloud within 24 hours... or less...help?:
not to disrupt things, but since we discussed ownCloud, OC has mostly collapsed and most of the team moved to NextCloud. I would consider any previous advice to use ownCloud to actually refer to NextCloud unless someone clarifies otherwise. NextCloud is fully open source, doesn't have different versions and is under heavy development. I would start with that.
The problem with NextCloud is that there is not a repository based solution for it.
You have to install from sources.
Oh that sucks.
Still doable, but not nearly as nice.
Correct, and it is very low on my priority list for at least a month if not more.
OwnCloud still works perfectly fine.
I can't seem to import OwnClound repo. Anyidea why?
Running CentOS7 via HyperV
Try
curl -O- "https://download.owncloud.org/download/repositories/stable/CentOS_7/repodata/repomd.xml.key" | rpm --import -If that doesn't work, just download the key using curl or wget and then do the rpm --import /keyfile
Can you give me an example about how to use curl or wget? yum -y wget https://.....key?
wget "https://download.owncloud.org/download/repositories/stable/CentOS_7/repodata/repomd.xml.key"wget is a way to download files on the command line. Look for the learning Linux series of posts @scottalanmiller did, they're great!
Thanks Travis. I found my stupid problem. First I don't have my glasses on and I could not differentiate lower and capital -o and -O. Second, I didn't put CentOS_7 with capital C,O,S.
After realizing that rpm --inport works just fine.
Found owncloud key on Opensuse. is it the same key file?
error.
@travisdh1 said in Building functioning OwnCloud within 24 hours... or less...help?:
@LAH3385 said in Building functioning OwnCloud within 24 hours... or less...help?:
@JaredBusch said in Building functioning OwnCloud within 24 hours... or less...help?:
@scottalanmiller said in Building functioning OwnCloud within 24 hours... or less...help?:
@JaredBusch said in Building functioning OwnCloud within 24 hours... or less...help?:
@scottalanmiller said in Building functioning OwnCloud within 24 hours... or less...help?:
not to disrupt things, but since we discussed ownCloud, OC has mostly collapsed and most of the team moved to NextCloud. I would consider any previous advice to use ownCloud to actually refer to NextCloud unless someone clarifies otherwise. NextCloud is fully open source, doesn't have different versions and is under heavy development. I would start with that.
The problem with NextCloud is that there is not a repository based solution for it.
You have to install from sources.
Oh that sucks.
Correct, and it is very low on my priority list for at least a month if not more.
OwnCloud still works perfectly fine.
I can't seem to import OwnClound repo. Anyidea why?
Running CentOS7 via HyperV
Try
curl -O- "https://download.owncloud.org/download/repositories/stable/CentOS_7/repodata/repomd.xml.key" | rpm --import -If that doesn't work, just download the key using curl or wget and then do the rpm --import /keyfile
Can you give me an example about how to use curl or wget? yum -y wget https://.....key?
@JaredBusch said in Building functioning OwnCloud within 24 hours... or less...help?:
@scottalanmiller said in Building functioning OwnCloud within 24 hours... or less...help?:
@JaredBusch said in Building functioning OwnCloud within 24 hours... or less...help?:
@scottalanmiller said in Building functioning OwnCloud within 24 hours... or less...help?:
not to disrupt things, but since we discussed ownCloud, OC has mostly collapsed and most of the team moved to NextCloud. I would consider any previous advice to use ownCloud to actually refer to NextCloud unless someone clarifies otherwise. NextCloud is fully open source, doesn't have different versions and is under heavy development. I would start with that.
The problem with NextCloud is that there is not a repository based solution for it.
You have to install from sources.
Oh that sucks.
Correct, and it is very low on my priority list for at least a month if not more.
OwnCloud still works perfectly fine.
I can't seem to import OwnClound repo. Anyidea why?
Running CentOS7 via HyperV
@scottalanmiller said in Building functioning OwnCloud within 24 hours... or less...help?:
not to disrupt things, but since we discussed ownCloud, OC has mostly collapsed and most of the team moved to NextCloud. I would consider any previous advice to use ownCloud to actually refer to NextCloud unless someone clarifies otherwise. NextCloud is fully open source, doesn't have different versions and is under heavy development. I would start with that.
First time hearing that. I'll look into it now.
@travisdh1 said in Building functioning OwnCloud within 24 hours... or less...help?:
You configure the host file with
vi /etc/hostsYou probably need to update the configuration for the ethernet adapter
vi /etc/sysconfig/network-scripts/ifcfg-eth0At a minimum you'll need these lines set correctly in the ifcfg-eth0 file
TYPE=Ethernet
BOOTPROTO=static
DEVICE=eth0
IPADDR=ipaddress
NETMASK=subnet
GATEWAY=gatewayaddress
DNS1=firstdns
DNS2=seconddnssystemctl reload networkHopefully that will get your network up and running. If not we're going to have to get a lot more information.
working now. Thanks!
What's the different between the Standard/enterprise and Free version? What am I missing out?
I am following @JaredBusch 's post but it seem my network config is the cause.
