FreeNAS vs Hardware NAS
-
As a point of interest.... the TrueNAS NAS products are a traditional NAS and use FreeNAS as the OS on them. They use mid end server hardware (SuperMicro specifically), a NAS OS you would not normally consider for production use on its own, are based on an OS that is not considered good for storage and use software RAID.
You can easily build vastly better hardware, opt for hardware RAID if you want, get better support options (from vendors like HP, Dell and Fujitsu) and use a faster storage OS (like Linux or the Solaris family) for less money and beat the TrueNAS product in speed, reliability and cost.
The TrueNAS value is getting full vendor support from one vendor for the entire product. The downside is that you spend extra money getting less and it is almost impossible for a vendor like iX to provide the four or six hour response options and massive globally availability logistical supply chains of HP and Dell. TrueNAS is comparable to ReadyNAS or Synology in this case, so in that regards it is fine, when you have inclusive support.
-
wow long article, i understand that physical NAS is better that software NAS
thank you very much, i will go and buy a physical NAS with 2 HD in and put it in RAID 1, i think i will buy a D-Link -
@IT-ADMIN said:
wow long article, i understand that physical NAS is better that software NAS
You missed the point of this information. The point what that you cannot compare the two conceptually.
-
@IT-ADMIN said:
thank you very much, i will go and buy a physical NAS with 2 HD in and put it in RAID 1, i think i will buy a D-Link
Absolutely nothing that I posted should lead you to think that that is a good idea.
-
If all that you need is two disks, then you will not be looking at building your own because there is no practical hardware for that on the market.
But if you are looking at consumer junk like D-Link, then why did you ask a question about performance and reliability? That does not fit. Your question would direct you in a different direction than your conclusion.
If you are looking at two bay NAS devices, your only reasonable options are ReadyNAS and Synology (or the ioSafe version of Synology.)
-
@scottalanmiller said:
@IT-ADMIN said:
thank you very much, i will go and buy a physical NAS with 2 HD in and put it in RAID 1, i think i will buy a D-Link
Absolutely nothing that I posted should lead you to think that that is a good idea.
hahaha sorry i leave the webpage for a long time without refreshing it, i didn't see all of your post until now, i was busy reading that article you send me
-
@scottalanmiller said:
Now the next set of issues is understand the concepts of the question. So let us start by defining what the question is about:
FreeBSD (and Similar) are NAS OSes. They are just a normal operating system with a web (or similar) interface added on to them for the purpose of managing the storage functions of the OS and hiding other functions. That's all. They are just an OS. It is just the software.
NAS is a hardware appliance that takes a server and a NAS OS and provides it as a single package of hardware and software with only an exposed interface for the storage functions (and necessary other configuration) and hiding most of the OS. That's all a NAS implies.
i think you wanted to write FreeNAS instead of FreeBSD , a typo right ?
-
-
@IT-ADMIN said:
@scottalanmiller said:
@IT-ADMIN said:
thank you very much, i will go and buy a physical NAS with 2 HD in and put it in RAID 1, i think i will buy a D-Link
Absolutely nothing that I posted should lead you to think that that is a good idea.
hahaha sorry i leave the webpage for a long time without refreshing it, i didn't see all of your post until now, i was busy reading that article you send me
Ah ha. No problem. That's odd that it is not refreshing on its own, though. It should.
-
@IT-ADMIN said:
@scottalanmiller said:
Now the next set of issues is understand the concepts of the question. So let us start by defining what the question is about:
FreeBSD (and Similar) are NAS OSes. They are just a normal operating system with a web (or similar) interface added on to them for the purpose of managing the storage functions of the OS and hiding other functions. That's all. They are just an OS. It is just the software.
NAS is a hardware appliance that takes a server and a NAS OS and provides it as a single package of hardware and software with only an exposed interface for the storage functions (and necessary other configuration) and hiding most of the OS. That's all a NAS implies.
i think you wanted to write FreeNAS instead of FreeBSD , a typo right ?
Yes. You are correct.
-
actually i have an issue, my topic doesnt appear in the list of topics ???
-
@IT-ADMIN said:
actually i have an issue, my topic doesnt appear in the list of topics ???
In which list of topics?
-
I see it showing up in the "unread" list as usual.
-
Looping back to this, in the past month I've worked with three different companies that all experienced significant data loss or downtime because of their choice of FreeNAS. Two suffered from not having front loaded their engineering and had an inability to support their servers during routine operations and caused major outages because of it along with significant cost for repairs, and one company that lost its data because of unnecessary bugs in the FreeNAS GUI code that would have been avoided has they been simply on FreeBSD.
Additionally this past week FreeNAS 10 "Coral" was demonstrated to be so incredibly unstable a month after being released that they had to recall the release and revert to a "beta" status indefinitely. For a trivial end user application this would be bad, for a critical storage infrastructure component on which companies need to have rock solid faith, it's unthinkable.
