Network setup - Hyper-V
-
Turning off firewalls and AV had no impact.
Initial launch and the app while in use is slow.
All PC's are impacted. All are hardwired 1 Gig cards and switches. Replaced all switches except the main switch
A ping -t shows <1 ms day or night
Transfer speed of a folder with files (about 300 Meg) is about 20 MB/s
I appreciate everyone's help here. It sucks when you set up a brand new server for a client and they want their 10 year old server back.
-
@ccwtech said in Network setup - Hyper-V:
I appreciate everyone's help here. It sucks when you set up a brand new server for a client and they want their 10 year old server back.
What OS was on the old server vs the new one? Wondering if it may be an SMB issue if they are going over a UNC path?
-
Going from 2008 R2 Standard to Server 2016 Standard
-
20 MB/s seems horrible to me. My home network is much faster than that.
-
@ccwtech said in Network setup - Hyper-V:
Going from 2008 R2 Standard to Server 2016 Standard
Hmmmm.. Are the workstations W7 or W10? Wondering if using different SMB versions may be an issue as well. I only mention this because I had a network issue a long time ago when I went from 2003 to 2008R2 and SMB was an issue until everyone was on W7 from XP.
Edit: - Also, are there any errors in the Event Viewer when copying large files or starting the app from a desktop?
-
Mixture of 7 and 10.
I should have tried this earlier, but I tried the application on my other VM (the domain controller - same physical box) and it's slow there as well. It's also slow on the physical box.
At least that eliminates a ton, but still doesn't tell me why it would be fast on the other VM itself.
-
I was thinking that my last post may be very critical in solving this issue. Any ideas to help?
-
Just trying to get your setup correct, Multiple 2016 VM's on one 2016 Hyper-V host. 1 RDS, 1 FS and 1 DC?
Is app installed on RDS or FS server?
-
@pmoncho said in Network setup - Hyper-V:
Just trying to get your setup correct, Multiple 2016 VM's on one 2016 Hyper-V host. 1 RDS, 1 FS and 1 DC?
Is app installed on RDS or FS server?
1 Physical Box with 2 VM's
1 - DC/DNS/DHCP
1 - File Server/RDS Server (Application resides here) -
And when it worked better - what was that setup?
-
@ccwtech said in Network setup - Hyper-V:
@pmoncho said in Network setup - Hyper-V:
Just trying to get your setup correct, Multiple 2016 VM's on one 2016 Hyper-V host. 1 RDS, 1 FS and 1 DC?
Is app installed on RDS or FS server?
1 Physical Box with 2 VM's
1 - DC/DNS/DHCP
1 - File Server/RDS Server (Application resides here)I am guessing they are are all on the same vswitch?
Is it slow when you access the app from the DC?
-
OLD vs. New
OLD:
Intel Xeon E5245 2.33Ghz (DUAL) / 16 GB Ram / 7,200 hard drives in RAID 1 / Broadcom BCM5708C NetXtreme GigE
VM1 - DC/DHCP/DNS - 8 Virtual Processors, 4 GB Static RAM, - Application resides on this box (file server)
VM2 - RDS Server - 5 Virtual Processors, 6 GB Static RAM - Used to remote into and run the application from VM1NEW:
Intel Xeon E5-2640 v4 2.4 Ghz / 64 GB Ram / 10,000 hard drives in RAID 10 / Intel I210 GB
VM1 - DC/DHCP/DNS - 1 Virtual Processor, 4 GB Static RAM
VM2 - RDS Server - 4 Virtual Processors, 24 GB Static RAM - This is RDS box and also where the application resides -
Maybe the issue is that SMBv1 is not available anymore for Server 2016 could be affecting the performance accessing over the network.
-
@black3dynamite said in Network setup - Hyper-V:
Maybe the issue is that SMBv1 is not available anymore for Server 2016 could be affecting the performance accessing over the network.
But you can enable just to test.
-
I'll give that a shot. Thank you!
-
What is the name of the application you are using? Have you tried to reach out to their support or Google around the issues you are having?
-
Also, don't forget to check the Event Viewer to see if there may be an error related to SMBv1/2/3.
-
@i3 It's a very proprietary veterinary software that was developed in the 80's and hasn't been updated since.
And... It's the industry leader. Their support is < worthless
Maybe not exact quote but @scottalanmiller said something to the effect of 'software developed by my uncle 20 years ago on a weekend when he was bored.'
-
So, old setup:
Win7/Win 10 using RDP to connect to RDS server (was it full desktop or published app?), and the RDS server connected via SMB to the File Server share to access the application?
No changes to the physical network switches?
-
And the current setup is:
Win 7/Win 10 PCs connect via RPD to RDS Server, where the application is now. So there is no need for the RDS to talk to the File Server?